Valve system - Import export

In case of request, all valves necessary for control of the flow can be manufactured in combination with air release and relief valves, as pre-insulated, and in accordance with the standard TS EN 488

The new generation of our VH series valve terminals. Modern pneumatics with economical energy consumption, compact dimensions and high flow rates. With multipolar electrical connection with D-SUB 25-pin or flat connector as standard. Core items: Reduced dimensions (15mm) Low power consumption (0.85W) High flow rate for size Compact and clear design Metal construction for a long service life even under harsh environmental conditions Fast cycle times thanks to the latest generation of magnetic coils Manual operation easily accessible LED display integrated in the magnetic coil Connection strips with modular system All islands are delivered assembled and tested

This battery system allows the assembly of a series of solenoid valves type VY in 1/8 with various functions. The electrical control is integrated in the housing and equipped with a 25-pin SUB-D connector. The valve terminal can be preconfigured and ordered fully assembled and tested, or, thanks to the very simple, intuitive coding, you can assemble it yourself on the basis.

Manual slide valves as real shut-off valves, which allow the system to be vented when it is switched off. Available in sizes 1/8 to 1/2″. Other colors such as black or red, as well as special versions with spring return or latching are available on request.

The ViscoMT-D bin emptying system offers a modern way of emptying small containers and bins cleanly. The use of our dispenser series for the removal of the medium offers the following advantages: - container sizes from approx. 100 ml to 5 l - viscosities of approx. 80,000 - 1,000,000 mPas - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - Removal of filler-loaded material - no backflow within the withdrawal pump - electrical control of the pump with pressure control - direct dosing from the container possible - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: Removal of materials directly from the delivery container, e.g. silicones, adhesives, resins, fats, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes)

The ViscoMT-XS hobbock emptying system offers a modern way of emptying containers.The following advantages result from the use of eccentric screw pumps for the removal of the medium: - container sizes from approx. 5 l to 50 l - viscosities of approx. 80,000 - 2,000,000 mPas - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - Removal of media loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: - Removal of media directly from the delivery container, e.g. silicones, adhesives, resins, greases, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes) - supply of media to dispensers - direct dosing as pulsation-free flow rate

Upgrade your valve systems with our premium PEEK valve discs, meticulously crafted from high-performance thermoplastic material. Engineered to withstand demanding environments, these valve discs offer unparalleled durability, ensuring long-term reliability and optimal sealing performance. Whether you're operating in chemical processing, oil and gas, or other industrial sectors, our PEEK valve discs provide the resilience and efficiency your applications demand.

These pumps have been designed according to the most difficult conditions and heavy work.They are high performance pumps with diesel engine and S Valve System. Both models can deliver concrete up to 100 meters vertically or 300 meters horizontally. Both ELKOPOMP S45 & ELKOPOMP S60 are equipped with axle and tires. Thus, it can be easily towed and transported to required points. Moreover, the concrete delivery pipes can be easily assembled and become ready to deliver concrete. The brand of the hydraulic control unit used in ELKON Trailer Type Concrete Pumps is BOSCH-REXROTH (Germany) and the system is an open-circuit hydraulic system. ELKON Trailer Type Concrete Pumps are equipped with high quality and chrome coated concrete delivery cylinders. The system can easily regulate itself with power regulation when it delivers the concrete to higher distance by means of hydraulic pump which has variable flow, power regulation and axial piston.

These pumps have been designed according to the most difficult conditions and heavy work.They are high performance pumps with diesel engine and S Valve System. Both models can deliver concrete up to 100 meters vertically or 300 meters horizontally. Both ELKOPOMP S45 & ELKOPOMP S60 are equipped with axle and tires. Thus, it can be easily towed and transported to required points. Moreover, the concrete delivery pipes can be easily assembled and become ready to deliver concrete. The brand of the hydraulic control unit used in ELKON Trailer Type Concrete Pumps is BOSCH-REXROTH (Germany) and the system is an open-circuit hydraulic system. ELKON Trailer Type Concrete Pumps are equipped with high quality and chrome coated concrete delivery cylinders. The system can easily regulate itself with power regulation when it delivers the concrete to higher distance by means of hydraulic pump which has variable flow, power regulation and axial piston.

Our efficient 500 kW boilers use an advanced dual stage burner, 3-way valve system and smart controls to optimise temperature control and minimise fuel burn and emissions. From a small footprint they deliver maximum heat output, with pressures up to 10 bar and temperatures up to 90ºC. Canopy casing has a small footprint for ease of transportation. Cast iron 3-pass flue boiler allows for excellent combustion, stable temperatures and reduced short-cycling. Dual stage burner accurately matches fluctuating heat requirements and achieves lower emissions at part-load operation. Integrated 3-way valve ensures operating temperature is quickly achieved, maintains tight temperature control and reduces short-cycling. Able to communicate with building management systems and plant equipment. Electronic controls closely regulate and stabilise temperatures and offer advanced fault-finding capabilities. Master/slave configuration delivers load-on-demand

Our latest 250 kW boilers are extremely efficient, using an advanced dual stage burner, 3-way valve system and smart controls to optimise temperature control and minimise fuel burn and emissions. From a small footprint we’ll deliver maximum heat output, with temperatures up to 90ºC and pressures up to 10 bar. Canopy casing has a small footprint for ease of transportation. Cast iron 3-pass flue boiler allows for excellent combustion, stable temperatures and reduced short-cycling. Dual stage burner accurately matches fluctuating heat requirements and achieves lower emissions at part-load operation. Integrated 3-way valve ensures operating temperature is quickly achieved, maintains tight temperature control and reduces short-cycling. Able to communicate with building management systems and plant equipment. Electronic controls closely regulate and stabilise temperatures and offer advanced fault-finding capabilities. Master/slave configuration delivers load-on-demand functionality

The ViscoMT-XL drum emptying system offers a modern way of emptying containers. The following advantages result from the use of eccentric screw pumps for the removal of the medium: - container sizes from 50 l - viscosities of approx. 80,000 - 2,000,000 mPas - Bridge frame can be driven underneath with drums on pallets - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - Removal of media loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: - Removal of media directly from the delivery container, e.g. silicones, adhesives, resins, greases, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes) - supply of media to dispensers

The ViscoTreat-R preparation and feeding system ensures an even and reliable product supply. At the same time, the medium is optimally prepared for the production process by stirring and circulating. The use of the VRP dispenser series for the further transport of the medium offers the following advantages: optimal processing of viscosities up to 50,000 mPas very low shear stress of the medium very low pressure load of the medium (max. 18 bar) - Removal of media loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - no air supply necessary - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - Stator material is adapted to the medium to be pumped Application: - Feeding and processing of medium to highly sensitive media, e.g.: Silicones, adhesives, resins, greases, colour pastes, metal-filled pastes

Preformed silicone heaters are useful for diamters as small as 12 mm and up to 100 mm. Rounded silicone heaters are not possible with self-adhesive foil. Spiral Wrap Pre-Formed Silicone Rubber Heaters are suitable for tubes and flexible pipes and hoses with Ø 6,35 mm (1/4"). Spiral formed flex heaters can be used up to Ø 12 mm (the length of the stretchable silicone spiral wrap heater is reduced accordingly). The thickness of our spiral-wrapped silicone strip heaters is 2,2 mm. Also our gas and pump line heaters, most frequently used in the semi-conductor process, are shaped and pre-formed according to the object geometry to be heated. They are designed to regulate temperatures in order to prevent condensation in the line. Current applications here are Semi Conductors, Vacuum Chambers, Wafer Chucks, Valves, Exhaust & Pump Systems.

The ViscoMT-L 3 / 18 barrel emptying system offers a modern way of emptying containers.The connection with the ViscoTec VMP dispenser series for the removal of the medium offers the following advantages: - container sizes from approx. 50 l to 300 l - viscosities of approx. 80,000 - 2,000,000 mPas - very low shear stress of the medium - very low pressure load of the medium (max. 18 bar) - removal of materials loaded with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: Removal of materials directly from the delivery container, e.g. silicones, adhesives, resins, greases, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes) - supply of media to dispensers

STRATE valve shafts are used in industrial and municipal areas. The different design sizes of the STRATE AWALIFT valve shafts allow the optimum size to be assigned to every individual purpose. Pipe and cable ducts, which are located exactly according to customer specifications in the manufacturing plant, meet all requirements for an exact fit, safety and ease of maintenance. Optimum, safe installation locations for valves and system components whose size allows them to be housed in a shaft Are excellently suitable as inspection shafts with flushing connection, as feeding points for AWAaerob ventilation systems, for ventilation and bleeding valves, for pig traps etc. Are made of high-quality, durable and waterproof materials with a high material strength and low material weight, with the design permitting short installation times and excluding complex

PEEK valves are engineered to provide exceptional performance in demanding environments. Known for their superior chemical resistance and lightweight properties, these valves are ideal for applications requiring high-pressure and corrosion resistance. Whether in medical devices, industrial fluid control, or laboratory systems, PEEK valves deliver precise and reliable flow control. With the ability to withstand extreme temperatures and aggressive chemicals, they offer a long-lasting solution for fluid handling systems. Choose PEEK valves for durability, efficiency, and seamless integration into your system.

TOPAZ differential valves are the ideal valve for water tanks in pressurised systems. The float valve with diaphragm offers a high flow rate of up to 200 l/min. Furthermore, an adjustable level control from 50 mm up to 2500 mm is possible. This minimises the number of start-stop operations of the pump system and ensures minimal pump operation.

For liquids that have to be mixed before processing and then pumped or contain small solids, the new Diaphragm pumps with an integrated air-operated Double diaphragm pump is the perfect solution. The mixing and pumping process takes place via a suction and mixing tube and a 3-way valve. The pre-assembled system is immediately ready for operation with a few simple steps and is also suitable for explosive liquids. * Mixing and pumping integrated in one system * stufenlose Regelung der Folgeplatte über Steuerventil * Media examples: Paints and varnishes, emulsions, dispersions, suspensions, water/oil mixtures, liquids with increased viscosity and solids content Features & Advantages * Quick installation and time saving through easy handling * Compact design * Base plate offers good stability on the container lid * Easy to insert into the 2" bunghole of the container by balancer or overhead crane * No further mixer necessary

The HD series lifting platforms are lifting equipment to be installed in a fixed position and are driven by an electro-hydraulic control unit. The double pantograph structure allows a high stroke and reduced overall dimensions (only the minimum height increases). Built according to accident prevention guidelines, they are equipped with a fall protection valve and a safety perimeter. General characteristics: Very robust structure in painted steel Construction according to CE safety standards Upper platform in smooth sheet Aluminum safety perimeter on the upper platform High quality hydraulic power unit, internally positioned, designed for intermittent use of 30% Push-button panel with low voltage controls Hydraulic system with safety valve for overload Control valve for descent speed Oversized hydraulic cylinders with anti-fall valve in case of broken pipes Anti-shearing safety distance between the pantograph arms Joints with self-lubricating bushings

This system's function is to allow the administration of medication/vaccination and supplementation to animals, dosing the latter accurately in the water they drink daily. This Kit, together with an electromagnetic pump, will dose medication/vaccination and supplementation in a safe and controlled way, respecting the values ​​recommended by technicians and manufacturers. The Kit is equipped with a by-pass, allowing, with a simple valve operation, to use the system to dose the products described above, as a water supply point.

The valve grinder is breaking new ground in valve grinding. Instead of the traditional colletor chuck/lock assembly, the "DoubleV" working system gives very sharp and precise results and is extremely easy touse.The unique valve locking system is applicable to a wide variety of engines.

Swivel motors from this series are generally suitable when program sequences such as acceleration – travel – deceleration in open-loop or closed-loop controlled systems are determined via proportional or servo valves. The swivel motors in this series are often also suitable in combination with simple hydraulic circuits if the inertia forces occurring are small, e.g. when opening and closing emptying systems, actuating valves, placing and removing workpieces, swiveling load handling devices and much more. In order to provide our customers with the right drive for all areas of application, the HSG swivel motor is available in a total of 11 different versions. We have listed the most important data below. You can find all further details in our data sheet.

Swivel motors from this series are generally suitable when program sequences such as acceleration – travel – deceleration in open-loop or closed-loop controlled systems are determined via proportional or servo valves. The swivel motors in this series are often also suitable in combination with simple hydraulic circuits if the inertia forces occurring are small, e.g. when opening and closing emptying systems, actuating valves, placing and removing workpieces, swiveling load handling devices and much more. In order to provide our customers with the right drive for all areas of application, the HSG swivel motor is available in a total of 11 different versions. We have listed the most important data below. You can find all further details in our data sheet.

Swivel motors from this series are generally suitable when program sequences such as acceleration – travel – deceleration in open-loop or closed-loop controlled systems are determined via proportional or servo valves. The swivel motors in this series are often also suitable in combination with simple hydraulic circuits if the inertia forces occurring are small, e.g. when opening and closing emptying systems, actuating valves, placing and removing workpieces, swiveling load handling devices and much more. In order to provide our customers with the right drive for all areas of application, the HSG swivel motor is available in a total of 11 different versions. We have listed the most important data below. You can find all further details in our data sheet.

Swivel motors from this series are generally suitable when program sequences such as acceleration – travel – deceleration in open-loop or closed-loop controlled systems are determined via proportional or servo valves. The swivel motors in this series are often also suitable in combination with simple hydraulic circuits if the inertia forces occurring are small, e.g. when opening and closing emptying systems, actuating valves, placing and removing workpieces, swiveling load handling devices and much more. In order to provide our customers with the right drive for all areas of application, the HSG swivel motor is available in a total of 11 different versions. We have listed the most important data below. You can find all further details in our data sheet.

Swivel motors from this series are generally suitable when program sequences such as acceleration – travel – deceleration in open-loop or closed-loop controlled systems are determined via proportional or servo valves. The swivel motors in this series are often also suitable in combination with simple hydraulic circuits if the inertia forces occurring are small, e.g. when opening and closing emptying systems, actuating valves, placing and removing workpieces, swiveling load handling devices and much more. In order to provide our customers with the right drive for all areas of application, the HSG swivel motor is available in a total of 11 different versions. We have listed the most important data below. You can find all further details in our data sheet.

Swivel motors from this series are generally suitable when program sequences such as acceleration – travel – deceleration in open-loop or closed-loop controlled systems are determined via proportional or servo valves. The swivel motors in this series are often also suitable in combination with simple hydraulic circuits if the inertia forces occurring are small, e.g. when opening and closing emptying systems, actuating valves, placing and removing workpieces, swiveling load handling devices and much more. In order to provide our customers with the right drive for all areas of application, the HSG swivel motor is available in a total of 11 different versions. We have listed the most important data below. You can find all further details in our data sheet.

Swivel motors from this series are generally suitable when program sequences such as acceleration – travel – deceleration in open-loop or closed-loop controlled systems are determined via proportional or servo valves. The swivel motors in this series are often also suitable in combination with simple hydraulic circuits if the inertia forces occurring are small, e.g. when opening and closing emptying systems, actuating valves, placing and removing workpieces, swiveling load handling devices and much more. In order to provide our customers with the right drive for all areas of application, the HSG swivel motor is available in a total of 11 different versions. We have listed the most important data below. You can find all further details in our data sheet.