Tap - Import export

The TEC artec TECpress steam conversion station is a combination of pressure, quantity and temperature control. The subcritical controlled pressure release is integrated with the proven downstream temperature control systems into a complete solution. Due to different design versions, various applications such as turbine bypass stations or district heat extraction can be realised.

SINGLE-LEVER HAIRDRESSER TAP Flexible stainless steel supply hoses, 70 cm long Flexible gray PVC 120 cm Chromed shower with mechanical stop

With XChange from LMT Fette, with its patented interface, for the fi rst time it has been possible to combine the advantages of carbide and steel in a modular tap. Approximately 90 % of the taps used nowadays are still made from high-speed steel. This is because this cutting material is featuring the requested toughness for absorbing the torsional moment as well as the necessary load at the cutting edge when rewinding the tap. HSS, however, is having some disadvantages also, compared to solid-carbide taps: tool life and most importantly the feasible cutting speeds and cycle times are significantly lower. With XChange two physically prohibitive properties has been combined: The solid-carbide threaded head, a combination of ultra-fine grain carbide and high performance coating, is providing: - maximum tool life - and high cutting speeds The flexible steel shank guarantees - the stability of the tool - and offers extra efficiency

TECHNICAL SPECIFICATIONS -M3-M16 - M3-M30 tapping capacity -220V high efficiency, intelligent servo motor -Manual or Automatic operation possibilty -24V operating voltage for operator safety -Robust body structure -Digital torque setting -Digital forward and reverse speed control -Tapping by chip removal -Acrobatic arm mechanism that can xtend up to 1100 - 1200mm -Ability to tap vertically, horizontally and angle -Quick and easy tool changing -Clamps preventing tool breakage We offer practical use and competitive price advantage in metal processing.

TECHNICAL SPECIFICATICATIONS -M5-M36 tapping capacity -24V operating voltage for operator safety -2.2KW-4KW - 380V Electric motor -Two stage gearbox providing high speed and torgue -PLC controlled touch screen -Manuel or Automatic operation possibility -Digital depth adjusment -Digital pressure-torque setting -Digital forward and reverse speed control -Tapping by chip removal -Robust body structure -Acrobatic arm mechanism that can extend up to 2050mm -Ability to tap vertically,horizontally and angle tapping -Quick and easy tool changing -Clamps preventing tool breakage We offer practical use and competitive price advantage in metal processing.-tapping.

TECHNICAL SPECIFICATIONS -M5-M42 tapping capacity -2.2- 4KW - 380V Electric motor -Two stage gearbox providing high speed and torque -Adjustable forward and reverse speed control -Adjustable pressure-torque setting -Robust body structure -Swing arm mechanism extendable up to 2050mm -Vertical, horizontal and angle tapping options -Quick and easy tool changing -Clamps preventing tool breakage -Phase protection system that prevents the electric motor and hydraulic pump from working in reverse direction We offer practical use and competitive price advantage in metal processing.

BIDET SPRAYER

Large Quantities: produced as cold formed parts (so-called multi-station presses), which require high output volumes in order to achieve a reasonable price parts Small Quantities: Produced as turned parts - the economic adjustment to small batch sizes Fields of application: For thermoplastics, duroplastics, light alloys, metal compounds. Industrial consumers: Electrical industry, plastics processing industry, sheet metal processing industry, telecommunications, tank- and container construction.

Tap-Off Boxes are used to draw power from the Busbar TrunkingTo supply the Rack Cabinets with the required energy and monitor the consumption. EAE offers a wide range of Tap-Off Boxes constructed out of sheet metal and plastic.Customized Tap-Off Boxes provide an independent setup for choosing a variety of electrical equipment to be installed regardless of the brand. Energy Metering over RJ-45 connection, utilizing the structured cabling is one of the value-added features of the EAE Tap-Off Boxes. As for the real-time monitoring of energy consumption and other critical power parameters in the data centres, thereby creating a more efficient IT infrastructure.

Helicoil finishing HSSE tap for metric thread inserts. For manual use and use in through holes Complies with DIN 81402 It is the most popular Helicoil STI tap, as in many cases it can be used without the need for roughing and bottoming taps. It also included in our Thread repair kits For better results, you may first use a roughing tap to prepare a hole Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality

Type H Helicoil HSSE tap for metric thread inserts. Compatible with all types of helicoidal thread inserts For blind holes and manual or machine use. Spiral flutes of the tap extract chips from blind holes which allows to avoid stuffing Complies with DIN 81402 For better results, you may first use a roughing tap to prepare a hole Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality

Self-tapping insert installation tool for all types of self-tapping threaded inserts (with cutting slots Ensat 302, with cutting holes Ensat 307 and Ensat 308) and in different materials (galvanized steel, stainless steel, brass, plastic) For machine use Depth of grip adjustable with bushing Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality

A single-thread galvanized steel self-tapping screw with a 30-degree angle. Cylindrical head Standard Pozidriv-type cross impression (Torx impression is also available upon request) Reduced core and wide thread pitch for high performance in plastic materials Specially designed to provide reliable fastenings in a wide variety of thermoplastic materials, such as ABS, polyamide e.g. Nylon 6-6, PVC and polycarbonate Very simple installation using a regular screwdriver

A single-thread galvanized steel self-tapping screw with a trilobal shank and single thread with 45°degree angle Pan head Standard Pozidriv-type cross impression (Torx impression is also available upon request) The special shape of its cross-section, the high ratio of the outer diameter to the diameter of the shank, the large pitch of its thread and the narrow angle at the apex of the 45 degrees threads ensure the best anchorage in plastic materials Better distributed and lower value stresses in plastic materials, highly vibration- and tear-resistant tightening, reduced risk of cracking in materials, screwing with low torque value Specially designed to provide reliable fastenings in a wide variety of thermoplastic materials, such as ABS, polyamide e.g. Nylon 6-6, PVC and polycarbonate Very simple installation using a regular screwdriver

Thread standard: Metric, ISO DIN 13 Type: Machine tap Form B with spiral entry, for through holes Application: General use Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.

Thread standard: Metric Fine, ISO DIN 13 Type: Machine tap Form B with spiral entry, for through holes Application: For high-tensile materials Material of product: HSSE Surface treatment: TIN For materials: High-tensile materials, Alloyed heat-treatable steel, Cast iron , Aluminium cast and wrought alloys, Copper and alloys, etc* Tensile strength up to: 1300 N/mm2 Standard: DIN 374 Tolerance: ISO2/6H Special geometry, base material and surface treatment for high-strength material. The TIN surface treatment (titanium-nitride gold-yellow) increases the surface hardness (approx. 2300 HV) and the sliding properties. It provides a better cutting performance and increased tool life time. Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Materials: High strength material up to max. 1300 N/mm² Alloyed heat-treatable steel, cast iron with nodular graphite,

Thread standard: Metric Fine, ISO DIN 13 Type: Machine tap Form B with spiral entry, for through holes Application: Left-hand Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 374 Tolerance: ISO2/6H Left-hand (counter clockwise rotation). Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materialsCorrect lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.

Thread standard: Metric Fine, ISO DIN 13 Type: Hand tap, Form C, for through and blind holes, with straight flutes Application: For high-tensile materials Material of product: HSSE Surface treatment: no For materials: Wear resistant steel Tensile strength up to: 1000 N/mm2 Standard: DIN 2181 Tolerance: ISO2/6H Set of 2 taps (taper, finish). Two-piece hand taps- sets are used for fine threads with a smaller pitch than with coarse thread, as the thread profile surface is smaller than with coarse threads and the force effects on the taps are smaller. The advantage of two-piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with a ring) removes 65 per cent of the thread profile and the and brings the thread into shape. The finishing tap (No. 3) has no ring marking and cuts the remaining thread profile to produce the 100% full and usable thread.

Thread standard: Metric Fine, ISO DIN 13 Type: Hand tap, Form C, for through and blind holes, with straight flutes Application: General use Material of product: HSSG Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 2181 Tolerance: ISO2/6H Set of 2 taps (taper, finish). Two-piece hand taps- sets are used for fine threads with a smaller pitch than with coarse thread, as the thread profile surface is smaller than with coarse threads and the force effects on the taps are smaller. The advantage of two-piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with a ring) removes 65 per cent of the thread profile and the and brings the thread into shape. The finishing tap (No. 3) has no ring marking and cuts the remaining thread profile to produce the 100% full and usable thread.

Thread standard: Metric, ISO DIN 13 Type: Combined machine bit tap (core hole drilling and thread tapping) for through holes Application: Combined (core hole drilling and thread tapping) Material of product: HSSG Surface treatment: no For materials: Materials of medium mechanical strength, non ferrous metals and thermoplastics Tensile strength up to: 600 N/mm2 Standard: Factory standard Tolerance: ISO2/6H Combined Bit taps have been designed for drilling, tapping and deburring in one operation using battery-powered screwdriver drills and electric hand drills with right-hand and left-hand rotation, but they are also suitable for thread cutting in a stationary drilling machine. It is possible with this tool to produce through threads up to a maximum threaded depth of 1 x D. They are especially usefull for mounting an dsmall batch production. Take care that the tool and the axis of the hole are exactly aligned and use a suitable cutting oil.

Thread standard: Metric, ISO DIN 13 Type: Machine bit tap Form D, for through and blind holes Application: General use Material of product: HSSG Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: Factory standard Tolerance: ISO2/6H Bit taps have been designed for thread cutting using battery-powered screwdriver drills and electric hand drills with right-hand and left-hand rotation. But they are also suitable for thread cutting by hand or in a stationary drilling machine. Your battery-powered screwdriver drill should have a minimum power of 7.5 Volts. Take care that the tool and the axis of the hole are exactly aligned and use a suitable cutting oil. For thread cutting we recommend using battery-powered screwdriver drills and electric hand drills with lowest rotaionsettings (0 - 450 RPM) and maximum torque settings.

Thread standard: Metric, ISO DIN 13 Type: Machine forming tap Application: Oversized diameter 6GX Material of product: HSSE Surface treatment: TIN For materials: Steel, Stainless steel, Cast aluminum, Coper, Brass etc* Tensile strength up to: 850 N/mm2 Standard: DIN 371/376 Tolerance: ISO3/6GX Tolerance ISO3/6GX – Thread with large clearance. The Forming tap has improved geometry for an optimal processing of a big range of materials. The lubrication grooves provide the necessary lubrication to depths of 2.5 D. Advantages: no chips up to 20 times longer lifetime (compared to taps) same forming tap for through hole and blind hole wide range of materials can be processed intersection of the thread is impossible no pitch or flank angle errors increased strength of the thread through material deformation higher surface quality much higher cutting speed Please be aware to reach enough cutting speed, so that the material can optimally plasticized. Only for machine use.

Thread standard: Metric, ISO DIN 13 Type: Machine forming tap Application: General use Material of product: HSSE Surface treatment: TIN For materials: Steel, Stainless steel, Cast aluminum, Coper, Brass etc* Tensile strength up to: 850 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6HX The Forming tap has improved geometry for an optimal processing of a big range of materials. The lubrication grooves provide the necessary lubrication to depths of 2.5 D. Advantages: no chips up to 20 times longer lifetime (compared to taps) same forming tap for through hole and blind hole wide range of materials can be processed intersection of the thread is impossible no pitch or flank angle errors increased strength of the thread through material deformation higher surface quality much higher cutting speed Please be aware to reach enough cutting speed, so that the material can optimally plasticized. Only for machine use.

Thread standard: Metric, ISO DIN 13 Type: Combined machine tap (core hole drilling and thread tapping) Application: Combined (core hole drilling and thread tapping) Material of product: HSSE Surface treatment: no For materials: Materials of medium mechanical strength (alloyed and non-alloyed steels up to 600 N/mm², Malleable cast iron, Graphite cast iron, Copper, Brass, Aluminium, Aluminium-magnesium alloys, Zink alloys, Red bronze, Electron metall, Pressure-cast zink) Tensile strength up to: 600 N/mm2 Standard: DIN 357 Tolerance: ISO2/6H Combined machine taps enables the user to produce the tapping drill hole and the through thread in one operation without any tool changing. The tool incorporates a twist drill before the thread-tapping part. It is possible with this tool to produce through threads up to a maximum threaded depth of 2 x D. It is sensible to use this tool on machines possesing an RPM switchover facility for drilling and tapping.

Thread standard: Metric, ISO DIN 13 Type: Machine nut tap Application: General use Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 850 N/mm2 Standard: DIN 357 Tolerance: ISO2/6H Maschine Nut tap for through holes with long shank for taking some thread cutted nuts. For thread depth up to 1,0 times diameter. Also useable for thread cutting in awkward places. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.

Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: Oversized diameter 6H+0.1mm Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H+0.1mm Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. + 0,1 mm oversize for electroplating allowance ≈ 25 µm thickness. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.

Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: Oversized diameter 7G Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO3/7G Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Tolerance 7G – allowance for distortion caused by heat treatment. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.

Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: Overlengthed (long shank) L=150 Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.

Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for through and blind holes, with straight flutes Application: For brass Material of product: HSSE Surface treatment: TIN For materials: Brass (short chipping) Tensile strength up to: 600 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Due the cutting geometry specially recommended for applications in Copper-zinc alloy (Brass) - short-chipping. Tap for machine use in blind and through holes. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.