Shafts - Import export

UĞURMAK UDK Series Vertical Shaft Impact Crushers are preferred at the last stage of the crushing and screening process. They have a high production capacity. It successfully performs to break wet, moisty and sticky materials. Moreover, such fed materials get rid of some of the water in the body with the kinetic energy that emerges when it collides with the rotor rotating at high speed. Therefore, the end material is relatively drier. Thanks to these advantages, it is highly demanded for use in the production of sand and gravel necessary for concrete and asphalt production. Depending on the design of the facility, it can be manufactured as mobile, with fixed steel legs, with fixed skid chassis or with front feed.

At Micron, we manufacture quality. These dies are made of stainless steel and come in a two piece set. 14mm Rhinestone/ Jean button Dies are compatible with TEP 1,TEP 3 DEP 2, PL 10, M 3 and MC 20 fastener attaching machines. Top Dies shaft is ¼” threaded.

The standard version is universally usable, but in special cases the light version can offer additional advantages.The light version is suitable for tight installation conditions and is also easier to fit in nonsplit grooves.This version reduces the friction. The low compression reserve with a negative effect on large tolerances must be considered.

The standard version is universally usable, but in special cases the light version can offer additional advantages. The light version is suitable for tight installation conditions and is also easier to fit in nonsplit grooves.This version reduces the friction. The low compression reserve with a negative effect on large tolerances must be considered.

The pictures attached which the parts we supply to our customers are for your reference, they are to show our capabilities, we quote and produce the parts as per customers' drawing or samples. Concern the protection of customers' intellectual property, we do not sell any parts to the third party

Turned spindles, axles, shafts. Pistons for pneumatics, hydraulics, pumps. Ground, hardened, polished, chrome-plated.

The process is CNC turning. The material is stainless steel.

ZWP is one of the leading independent manufacturer in Germany for gears, pinions and rim gears. We supply already well-known manufacturers for gear boxes. We are looking forward getting intouch with you to have a conversation about possibilities for your supply. Sectors of our (international) customers are: Mining, Oil, Offshore, rail and ship transmissions, industrial transmissions, and many more fields of applications. Overview about the capabilities for production: Gears internal and external toothed hardened and grinded Module 2 – 50 mm Diameter 100 – 2,000 mm Internal toothed rings / rim gears hardened and grinded Module up to 20 mm - more on request Diameter 100 to 1,800mm Pinions and shafts internal and external toothed hardened and grinded Module 1 – 50 mm Diameter 50 – 500 mm Length up to 1,500 mm Hardening and balancing inhouse possible Cooperation with companies for special manufacturing of gears and pinions etc We speak English.

Transmission Shafts: These include counter shafts, line shafts, and overhead shafts. They are primarily used to transmit power between the source and the machine absorbing power. The transmission shafts are used to rotate the gears and provide mechanical power for various applications. Machine Shafts: These are an integral part of the machine itself. The best examples are the shafts used in motors and gearboxes. Spindle: A spindle is a type of shaft that is used to hold and drive work pieces in, for example, lathe machines. They are designed to withstand high torsional loads and are precision-made. Hollow Shafts: These shafts are similar to solid shafts but are hollow in the middle. They are used in applications where weight is a concern, as they are lighter than solid shafts of the same strength. Stepped Shafts: These shafts have different diameters in different sections. They are often used in machines where the shaft needs to perform different functions, requiri

Tower is a group of manufacturing facilities, offering one-stop solution for quality mechanical products with total lower cost in China. We can supply a full-range of metal products, such as sheet metal fabrication, cnc machining parts, casting parts, especially assembly parts. Product market range cover auto industry, medical industry,agricultural machinery, sport industry and so on. Because of our complete equipments, we are very suit for making all kinds of Assembly Parts. All of our products are customized by customer's drawing. Please feel free to send us your drawing or sample to customize!!!

Diameter (D,d): ø50 ÷ ø650 mm Length (L,l): 500 ÷ 6000 mm Weight: 50 ÷ 5000 kg

We produce shafts for pumping units made of the following materials: steel 20H13, 30H13, 40H13 as per GOST 5632-2014; GOST 5949-2018; 14H17N2 as per GOST 5949-2018. Shafts made of other materials are also available subject to prior agreement. Subject to preliminary agreement, we are able to supply larger diameter shafts. All parts are manufactured according to drawings.

The steel structure is made of high quality material that can easily support the weight of the elevator, which allows us to speak with confidence about the safety and durability of the EMAK steel structure. At the same time, aluminum shafts, which are used to install home lifts, are installed within a few days. All Joins by screw. The moduler aluminium shaft does not require a separate machine room – perfect for tight installations. It has a low pit requirement of just 15cm

It is used with router together with the gear milling side It is suitable for easy disassembly system. It is used in bearings on the drive gear and end bearing side.

Worm gear worm shaft spur gear bronze worm gear steel worm shaft Our company (Huan-Tai) is rooted in China since mid-90’s. As one of the early runners, we bring value to the table through our capabilities in engineering, quality control and schedule management that meet the high expectations of overseas customers in stability, consistency and predictability. We are proud of our core competence in industry leading production processes, spectrometer analysis, critical NDT and tight tolerance machining. Our most experienced fields are in mechanical products (including parts) for applications in marine, agricultural equipment, automotive industry, railways, oil exploration, mining, construction and aluminum smelting equipment. With many years of experience, we learned the rules and we know the expectations of customers and have become part of their competitive strategy for success in their respective field.

INOX MACHINING

By cooperating with the leading Drive Shaft Manufacturers and service companies worldwide, we can cover almost any requirement. Our Drive Shaft warehouse with more than 20,000 positions offers a maximum of type diversity, from which almost every Drive Shaft can be manufactured.

Medical-grade, Biocompatible PEEK Polymer Materials Our medical-grade PEEK shaft liners are designed to ensure safe and reliable delivery of medical liquids. These PEEK tubing liner are made from durable and corrosion-resistant polyetheretherketone polymer material, and reduce friction and wear during delivery. Invest in the safety and reliability of your medical liquid delivery system with our high-quality PEEK shaft liners. Key Features of PEEK Liner Tubing: • Ultra hard material • Very good chemical resistance • Stable at temperatures up to 228°C • Excellent abrasion resistance • Flame retardant (UL94 V-0) • Very tight dimensional tolerances PEEK Tubing: • In coils, on spools or straight lengths with clean, square cuts • Translucent or Opaque • Wall thickness varying along length (Bumped tubing) • Coloured PEEK tubing • Multi-Layer PEEK tubing • Reinforced PEEK tubing (Stainless Steel Wires) • Shaped tubing

Welte Cardan-Service GmbH has developed into a leading company in the cardan shaft industry since 1972. Thanks to our many years of experience in the repair and overhaul of drive shafts and cardan shafts, we guarantee a rapid maintenance process with short delivery times, always optimised in line with our quality standards. Our maintenance service enables you to carry out the repair of almost any cardan shaft quickly.

Elastomer NBR. Brace ring and tension spring steel. Rotary shaft lip seals are readytoinstall seals for sealing rotating shafts. They are made from an elastomer outer sleeve and an internal bracing shim. The tension spring ensures increased pressure of the lip against the shaft and supports static sealing. Form A DIN 3760 (ISO 6194/1) version, smooth OD. Form AS DIN 3760 (ISO 6194/0) version, smooth OD with extra dust lip to protect from external dirt. The material NBR has a high wear resistance and is resistant to motor fuels, oil, hydraulic oil and lubricating grease. Operating limits Circumferential speed (m/s) ≤12 Pressure (MPa/bar) ≤0.05/0.5 (rotary shaft lip seals are generally meant for unpressurised operation).

Spline shafts based on DIN ISO 14 with straight parallel flanks. A spline shaft with spline hub is used to transmit high torques while enabling simultaneous axial movement. The spline shafts are colddrawn. Cold drawing does not interrupt the grain flow of the base material, ensuring spline shafts of very high strength. Tolerances Straightness 0.8 mm/m. Torsion max. 0.5 mm/m. On request Other lengths.

Standard ATprofile with metric pitch (trapezoidal toothing). For manufacturing your own toothed wheels

The surface treatment is cleaning and deburring.

Manufacturing Process CNC Machining & Injection Molding PEEK performance Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature performance to mechanical strength and excellent chemical resistance. Material Grade ARKPEEK-1000: 100%PEEK Produced from virgin polyetheretherketone resin and offers the highest toughness and impact resistance of all types. ARKPEEK-CF30: 30% Carbon Fiber + 70% PEEK Carbon fiber reinforcement lends the material a high level of rigidity and creep strength, high mechanical strength and heat conductivity values. ARKPEEK-GF30: 30% glass fiber + 70% PEEK Glass filled PEEK exhibits increased mechanical strength and high rigidity. ARKPEEK-MOD: 10% Carbon Fiber + 10% PTFE +10% Graphite high performance engineering plastic with product characteristics including excellent sliding and abrasion & wear resistance, high mechanical.

Costconscious use of resources Every year in Germany, several million refrigeratorsare disposed of . With this enormous volume, refrigerators are certainly counted among the most important recycling products. After removing the chlorofluorocarbons, in a second step the housings are broken down into their individual components – iron, aluminium, copper and plastics. These are then made available again to industry as secondary raw materials. We equip our clients with extremely tough and hardwearing shredder disks and thus contribute to costconscious handling of resources.

Customized lathe swiss shaft part for industrial use