Intelligent control - Import export

Outdoor cabins are produced as cabins, which are preferred in the field of use for GSM and operators. It is used for GSM base station, outdoor field and many other areas against external factors. Creates a protected system. These cabins work as a result of various testing systems. It has many features. Some of them are voltage protection, intelligent control unit, heater, smoke detector, humidity sensor, remote monitoring and remote control. Today it is used and needed in many areas. Advantageous and convenient are the cabins.

Just as innovative as the design of the AirgoClean® 140 E/145 E is its intelligent air purification system for permanent control and improvement of the room air quality. Protect your health and the health of the people around you with HEPA-filtered air that is 99.97 % free from harmful suspended particles. The AirgoClean® 140 E/145 E removes pathogenic viruses such as SARS-CoV-2 or the influenza virus, bacteria, fine dust, house dust, pollen, dust mite residues, mould spores or allergens from the room air just as reliably as cigarette smoke, smog and other unpleasant odours. Fully automatically, thanks to state-of-the-art air quality sensors. The air quality sensors of the AirgoClean® 140 E/145 E continuously monitor the room temperature and humidity as well as the air quality and microparticle load of the room air in order to clean it with an intelligently controlled air cleaning performance.

Just as innovative as the design of the AirgoClean® 140 E/145 E is its intelligent air purification system for permanent control and improvement of the room air quality. Protect your health and the health of the people around you with HEPA-filtered air that is 99.97 % free from harmful suspended particles. The AirgoClean® 140 E/145 E removes pathogenic viruses such as SARS-CoV-2 or the influenza virus, bacteria, fine dust, house dust, pollen, dust mite residues, mould spores or allergens from the room air just as reliably as cigarette smoke, smog and other unpleasant odours. Fully automatically, thanks to state-of-the-art air quality sensors. The air quality sensors of the AirgoClean® 140 E/145 E continuously monitor the room temperature and humidity as well as the air quality and microparticle load of the room air in order to clean it with an intelligently controlled air cleaning performance.

The search for solutions in the field of process engineering systems and methods presents us with new challenges every day. Electric heaters for the direct thermal treatment of incoming air in air conditioning systems or as preheater or afterburner for intake air in industrial equipment using intelligent processadapted control systems are gaining an increasing acceptance

Premium automatic vertical slicer Slicing without touching for maximum hygiene and optimal presentation The core component is a powerful blade drive with intelligent motor control Emotion®. Thanks to an automatic depositing system slices are laid out without manual handling and numerous depositing patterns allow optimal product presentation. The depositing system entirely made of stainless steel can be easily and quickly disassembled for thorough and efficient cleaning. The membrane keyboard with intuitive operating symbols ensures easy operation. Depositing patterns can be comfortably configured via direct keys and most frequently used keys can be permanently stored.

Powerful and flexible in manual operation specially for large products, even with bones such as air-dried ham. The vertical carriage ensures ergonomic, upright operation while providing an optimal view of the slicing result. The robust product holder and smooth carriage ensure risk-free slicing within the standardized design requirements. The core component is a powerful blade drive, optionally with intelligent motor control Emotion®.

The manual premium vertical slicer sets worldwide standards in terms of ergonomics, hygiene and safety. It stands out due to its wealth of variants. Individual and powerful slicer for a variety of products to be sliced in manual mode. The vertical carriage ensures ergonomic, upright operation while providing an optimal view of the slicing result. The core component is a powerful blade drive, optionally with intelligent motor control Emotion®. In addition, the VS12 can be fitted with a Ceraclean® surface which is easy to clean and ensures easy product feeding to the blade.

The manual premium vertical slicer sets worldwide standards in terms of ergonomics, hygiene and safety. It stands out due to its wealth of variants. Individual and powerful slicer for a variety of products to be sliced in manual mode. The vertical carriage ensures ergonomic, upright operation while providing an optimal view of the slicing result. The core component is a powerful blade drive, optionally with intelligent motor control Emotion®. In addition, the VS12 can be fitted with a Ceraclean® surface which is easy to clean and ensures easy product feeding to the blade.

Unique for large products to be sliced, powerful in manual mode The vertical carriage ensures ergonomic, upright operation while providing an optimal view of the slicing result. The core component is a powerful blade drive, optionally with intelligent motor control Emotion®. In addition, the VS12 F can be fitted with Ceraclean® surface which is easy to clean and ensures easy feeding of products to the blade. Particularly suitable as all-rounder for preparation areas, kitchens and cafeterias/canteens for the fresh meat counter

The new IMS5400-TH white light interferometer opens up new perspectives in industrial thickness measurement. The controller offers an intelligent evaluation feature and enables the thickness measurement of transparent objects with highest precision.

The VS12 W stands out due to its wealth of variants. Individual and powerful slicer for a variety of products to be sliced in manual mode. The vertical carriage ensures ergonomic, upright operation while providing an optimal view of the slicing result. The core component is a powerful blade drive, optionally with intelligent motor control Emotion®. In addition, the VS12 W can be fitted with Ceraclean® surface which is easy to clean and ensures easy feeding of products to the blade. Workflows for target weight slicing of up to 3 kg / 2 g are more efficient and precise due to a fully integrated portion scale.

2-phase high-torque stepper motor in NEMA 17, NEMA 23 and NEMA 34 sizes with flat-milled shaft (D-shaft). 1.8ׄ° increment angle (full increment) with integrated positioning control. Note: Stepper motor with integrated positioning control. It forms a convenient unit consisting of stepper motor and intelligent controller. Reference travel is possible on a block with reduced electric current without proximity switch. Integrated rotational monitoring. Smooth running through dynamic switching of increment trip. Actuation via single I/O interface, 31 position configurations and call-ups. Control unit can be parametrised quickly and conveniently with the software. The software and manual for programming the positioning control are available as free download. When selecting a suitable motor, using just the retaining torque is not enough, as the motor’s torque decreases with the speed. It is therefore essential to select the correct motor according to the torque curve.

The AF filter presses from AQUACHEM are a further development of conventional chamber filter presses, which have been tried and tested in the industry for over a century. However, due to the degree of automation required and the increase in efficiency necessary nowadays, the technology we have had up until now is often no longer up to date. The design of the AF filter presses is based on the optimum interplay of the ?? individual assemblies of the filter press to ensure reliable, efficient and permanent operation without personnel being present. The automated flexibility of the product enables autonomous adjustment to changing conditions, such as concentration or even specific filter properties. We guarantee these properties and also availability. This is only possible because AQUACHEM and the AF-series possess the knowledge, an intelligent control system and the technology for maximum flexibility. Yes, this is a product with unique selling points – test it out yourself.

HybridTechnology — just for automobiles? CompuSpray is the LubricationHybrid featuring a perfect addition to the PressSpray Technology, this system will allow selective spray lubrication while fully boxed in a stainless steel housing. Special brushes evenly spread the pulseactivated lube on the strop and prohibit any mist from exiting the system. Excess lube is collected and drained back into the reservoir. 45° angled entry or exit strip guide, made of stainless steel; to support threading if CompuSpray is mounted right after the Feeder GSW offers integration into its electrical controls system for intelligent choice of individual nozzles. this way, a minimal and exactly defined lubrication according to the feeding pattern is possible. The programming and visualization becomes part of the main PLC – for an unbeatable priceperformance ratio!

For perfect slicing and weighing of product in a single operation The VS12 W stands out due to its wealth of variants. Individual and powerful slicer for a variety of products to be sliced in manual mode. The vertical carriage ensures ergonomic, upright operation while providing an optimal view of the slicing result. The core component is a powerful blade drive, optionally with intelligent motor control Emotion®. In addition, the VS12 W can be fitted with Ceraclean® surface which is easy to clean and ensures easy feeding of products to the blade. Workflows for target weight slicing of up to 3 kg / 2 g are more efficient and precise due to a fully integrated portion scale.

The high-performance bagging carousel CIRCUPAC has been specially developed for the packaging of flour and powdery products in pillow bags and gusset bags with a filling weight of 10 kg to 50 kg. The CIRCUPAC is ideal for filling prefabricated open mouth bags made of woven PP, PE or paper. The special feature of the packaging machine is the continuously rotating carousel: All components are precisely matched to each other, so that the entire process is carried out without a start-stop system. A maximum output of up to 1200 bags per hour can be achieved. All movements are controlled by an intelligent master servo motor controller and are precisely coordinated with each other. An extended filling time by six filling stations as well as the constant compression of the product by special vibration plates result in a well-filled bag.

The new IMS5400-DS white light interferometer opens up new perspectives in industrial distance measurement. The controller has an intelligent evaluation feature and enables absolute measurements with nanometer accuracy at a relatively large offset distance. Compared to other absolute measuring optical systems, the IMS5400-DS offers an unsurpassed combination of accuracy, measuring range and offset distance.

The AWALIFT 2/2x2 wastewater pumping system is suitable for towns with up to approx. 2800 residents. The system can achieve a discharge head of up to 120 mWS, thanks to the parallel operation of two pumps. An adapted, intelligent pump controller handles control, ensuring almost fault-free operation. Draining small towns with up to about 2800 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, underground stations etc. Product features One holding tank with two separator systems 2 x 2 centrifugal pumps and motors according to type and operating location required Four pump gate valves Two STRATE non-return valves One Y-pipe DN 100 Two pressure pipe gate valves DN 100 Level measurement

Big 3: Performance, Plug-In ® label and Quality Check Inside - more customer benefits for future requirements The weigh price labeller GLM-Ievo intelligently designed for automatic weighing and labelling of pre-packaged goods comes in different versions. The Weigh Price Goods Labelling System GLM-Ievo 170 will achieve over 170 packs per minute. Due to its modular design, it can be optimally configured for alternative products and offers exemplary performance requirements in the food production area. Thanks to the modular system of the weigh price labeller, there are no limits for todays and any future requirements you may have in the industrial food area. Besides its flexibility, this labelling system stands out in terms of robustness and an easy-to-clean design. With intelligent visual quality control and automated activation of process data via the new function Plug-In® Label operation it is easy to maintain and manage thereby reducing errors during the packaging...

CMK 85/55-S3 Station Thermoforming Machine is eligible to form round and rectangular shape lids, plates and trays, single or mu iti compartment containers, hinged lid containers, leaking-proof containers, egg viyole, ete. Machine adopts the latest thermoforming technology itself and intelligent control. This model combines maximum speed and bulk production, high quality and efficiency, and low consumption in energy. lts mould is equipped to perform well with polymer plastics as well as biodegradable plastics. OTHER TECHNICAL SPECIFICATION AII units are fully automatic Movable touch control panel Screen size 75″ and colour Electricity panel assembled to the machine and cooling by AC Ethernet portal Possible to store different mould settings

CMK 95/65-S3 Station Thermoforming Machine is eligible to form round and rectangular shape lids, plates and trays, single or mu iti compartment containers, hinged lid containers, leaking-proof containers, egg viyole, ete. Machine has the bigger forming area than 85 series station machine, and it is better if high capacity is targeted. Machine adopts the latest thermoforming technology itself and intelligent control. This model combines maximum speed and bulk production, high quality and efficiency, and low consumption in energy. lts mould is equipped to perform well with polymer plastics as well as biodegradable plastics. OTHER TECHNICAL SPECIFICATION AII units are fully automatic Movable touch control panel Screen size 15″ and colour Electricity panel assembled to the machine and cooling by AC Ethernet portal Possible to store different mould settings Convenient and fast mould change and pneumatic fixing Pneumatic control systems with servo motors

CMK 95/65-S4 Station Thermoforming Machine is eligible to form round and rectangular shape lids, plates and trays, single or mu iti compartment containers, hinged lid containers, leaking-proof containers, egg viyole, flower pots and seeding trays. Machine has the bigger forming area than 85 series station machine, and it is better if high is targeted. Machine adopts the latest thermoforming technology itself and intelligent control. This model combines maximum speed and bulk production, high quality and efficiency, and low consumption in energy. lts mould is equipped to perform well with polymer plastics as well as biodegradable plastics. OTHER TECHNICAL SPECIFICATION AII units are fully automatic Movable touch control panel Screen size 15″ and colour Electricity panel assembled to the machine and cooling by AC Ethernet portal Possible to store different mould settings Convenient and fast mould change and pneumatic fixing Pneumatic control systems with servo motors

CMK 85/55-S4 Station Thermoforming Machine is eligible to form round and rectangular shape lids, plates and trays, single or multi compartment containers, hinged lid containers, leaking-proof containers, hole-punch containers, egg viyole, flower pots and seeding trays. Machine adopts the latest thermoforming technology itself and intelligent control. This model combines maximum speed and bulk production, high quality and efficiency, and low consumption in energy. lts mould is equipped to perform well with polymer plastics as well as biodegradable plastics. OTHER TECHNICAL SPECIFICATION AII units are fully automatic Movable touch control panel Screen size 15″ and colour Electricity panel assembled to the machine and cooling by AC Ethernet portal Possible to store different mould settings Convenient and fast mould change and pneumatic fixing Pneumatic control systems with servo motors Automatic lubrication of moveable parts which is activated as perthe specified time space

With its permanent magnet propeller and smart control system, it provides excellent high performance, low energy consumption (EEI ≤0.23), easy installation and use, and keeps your energy consumption at the lowest level thanks to its A class energy efficiency. PERFORMANCE RANGE Flow rate up to 57 m³/h Altitude value up to 15 m APPLICATION LIMITS Liquid temperature: -10℃～110℃ Maximum ambient temperature: +40℃ Maximum system pressure: 10 bar Protection level: IP44 Mains connection: 230V; 50Hz Insulation class: F Characteristic features: Flanged (PN6 and PN10 compatible) Installation: Motor shaft should be positioned in horizontal direction FEATURES and BENEFITS Class “A” energy efficiency – lowest energy consumption Permanent magnet motor – intelligent frequency change control

With its permanent magnet propeller and smart control system, it provides excellent high performance, low energy consumption (EEI ≤0.23), easy installation and use, and keeps your energy consumption at the lowest level thanks to its A class energy efficiency. PERFORMANCE RANGE Flow rate up to 45 m³/h Altitude value up to 15 m APPLICATION LIMITS Liquid temperature: -10℃～110℃ Maximum ambient temperature: +40℃ Maximum system pressure: 10 bar Protection level: IP44 Mains connection: 230V; 50Hz Insulation class: F Characteristic features: Flanged (PN6 and PN10 compatible) Installation: Motor shaft should be positioned in horizontal direction FEATURES and BENEFITS Class “A” energy efficiency – lowest energy consumption Permanent magnet motor – intelligent frequency change control

With its permanent magnet propeller and smart control system, it provides excellent high performance, low energy consumption (EEI ≤0.23), easy installation and use, and keeps your energy consumption at the lowest level thanks to its A class energy efficiency. PERFORMANCE RANGE Flow rate up to 41 m³/h Altitude value up to 10 m APPLICATION LIMITS Liquid temperature: -10℃～110℃ Maximum ambient temperature: +40℃ Maximum system pressure: 10 bar Protection level: IP44 Mains connection: 230V; 50Hz Insulation class: F Characteristic features: Flanged (PN6 and PN10 compatible) Installation: Motor shaft should be positioned in horizontal direction FEATURES and BENEFITS Class “A” energy efficiency – lowest energy consumption Permanent magnet motor – intelligent frequency change control Display instantaneous values ​​of power, head, flow rate and engine speed on a large screen

With its permanent magnet propeller and smart control system, it provides excellent high performance, low energy consumption (EEI ≤0.23), easy installation and use, and keeps your energy consumption at the lowest level thanks to its A class energy efficiency. PERFORMANCE RANGE Flow rate up to 24 m³/h Altitude value up to 6 m APPLICATION LIMITS Liquid temperature: -10℃～110℃ Maximum ambient temperature: +40℃ Maximum system pressure: 10 bar Protection level: IP44 Mains connection: 230V; 50Hz Insulation class: F Characteristic features: Flanged (PN6 and PN10 compatible) Installation: Motor shaft should be positioned in horizontal direction FEATURES and BENEFITS Class “A” energy efficiency – lowest energy consumption Permanent magnet motor – intelligent frequency change control

The use of ultraviolet-curing adhesives and compounds is constantly increasing. With the LedControl S UV LED controller, you remain flexible for future requirements. Due to the modular design, one UV LED lamp, up to five or even up to 16 UV LED lamps with different wavelengths can be operated and individually adjusted with one LEDControl S. For applications such as bonding, potting or fluorescence excitation, the wavelengths 365, 385, 395, 405 and 450 nm are available. With the variety of wavelengths, you remain particularly flexible and can upgrade and change over at any time. With several UV LED lamps, the irradiation can also be ideally homogenized to achieve the best possible uniformity. With the intelligent UV LED control, the power of the ultraviolet LED lamps can be individually adjusted between 2% and 100%. A timer for irradiation times between 0.01 s and 9999 s is already integrated.

ATEQ inovates in the measurement industry with this new instrument: the MF520. It associates speed with accuracy of leakage measurement through differential pressure drop measurement and flow measurement stability. Leak detection and flow control: valve seats, gear boxes, hydraulic components, motors, control of aerosols, injectors Measurement range: 2 / 20 / 200 ml/min Measurement units: SI, USA (SAE) and custom unit Indications of the ambiant temperature and atmospheric pressure Measurement element fully integrated into one module Normes ROHS RS232: printer, P.C. and memory modules RS232: intelligent RC5 remote control RS485: ATEQ network