Industrial maintenance - Import export

CONMONSense delivers precise, repeatable data about the health of your assets and electrical systems also in the most challenging environment. Its resonant piezo element is optimized for ultrasound driven lubrication, mechanical fault detection, and monitoring the health of valves, steam, hydraulic systems and electrical defects. Ultrasound is a true measure of the FITness of your facility. Most assets produce FRICTION, IMPACTING, and TURBULENCE as defect indicators. CONMONSense hears these phenomena at their inception and delivers an analog signal response to your connected measurement system. With an output range from 4-20mA or from 0-10V, CONMONSense mounts permanently to any asset to provide continuous condition monitoring data. Avoid unplanned downtime and put the safety of your plant and colleagues first.

Inspection contracts typically cover an inspection of the equipment at agreed intervals, followed by a detailed report stating any recommended maintenance, repairs or spares. Beyond the work covered by an inspection contract our service contracts cover the maintenance work, typically involving lubricant changes, replacement of wear plate and filter media.

The EPC SMC is equipped with an integrated proportional valve. This allows the analyser to automatically regulate the gassing in a wide range of processes. All settings for the control can be configured on the unit or via external signals. This means that the customer is not required to control the process completely manually. This gives you the option of controlling the gassing at our analyser or at the plant. For some processes, a single adjustment is sufficient and the production runs fully automatically from then on. Advantages - Over 20 years of experience in development and optimisation - Top response time and short heat-up phase - Two different sizes for added flexibility - Long average life components - Digital measurement data logging - User-friendly filter change - 5.7 inch touch screen - Intuitive menu navigation - in many languages

Calibration & Maintenance

The automatic leakage tester used to control the tightness of CO2 inert gas packaging allows even the smallest leaks - even in the micro range - to be detected.The package is tested by simply placing it in the vacuum chamber. The automatic test cycle starts when the lid is closed. The unit generates a user-defined vacuum during this process. After the vacuum is reached, the sensor is set to the "virtual" zero point. If the CO2 concentration rises during the measuring time that now begins and was previously selected by the user, this indicates that the packaging is leaking. The measured increase of the CO2 content in ppm gives information about the size of the not tightly sealed area. The sensor demonstrably detects even the smallest leaks up to approx. 10 µm. (µm is a micrometre and corresponds to 0.001 millimetres)

The EPC Spot is our measuring device for a random check of the gas levels of O2/CO2 in packaging or packaging machines. A sample is taken by a special needle. Due to the small amount of gas the analyser needs for the measurement, blister packs or ampoules can also be tested. As a user, you can enter several limit values for different products in the device. The result is then additionally visualised in red or green. All measurements are stored in the device and can be further processed in various ways. Advantages - Over 20 years of experience in development and optimisation - Top response time and short heat-up phase - Two different sizes for added flexibility - Long average life components - Digital measurement data logging - User-friendly filter change - 5.7 inch touch screen - Intuitive menu navigation - in many languages

The EPC VM is our measuring device for monitoring O2/CO2 in packaging machines. In addition to continuous measurement of the gas atmosphere, spot measurement of individual packages is also possible. The functionality is the same as with our Zr-Ox EPC spot analyser. Once set, the analyser can also control the gassing of the machine. Advantages - Over 20 years of experience in development and optimisation - Top response time and short heat-up phase - Two different sizes for added flexibility - Long average life components - Digital measurement data logging - User-friendly filter change - 5.7 inch touch screen - Intuitive menu navigation - in many languages - Various RS232 protocols that can be changed in the unit for communication with different soldering, packaging soldering, packaging machines, analysers or other equipment and processes - Operation for user and administrator in different levels

Our EPC 3GAS analyser is a more flexible variation of the basic model. The device changes the measurement automatically or externally controlled in order to monitor several processes simultaneously or consecutively. The change of the currently active measurement from process 1. to process 2. is done either by an external signal or in an adjustable time interval. Since our sensors can determine the oxygen concentration very quickly, time intervals of 30 seconds are realistically achievable. With desired concentrations of approx. 500 ppm, this is completely sufficient. Advantages - Over 20 years of experience in development and optimisation - Top response time and short heat-up phase - Two different sizes for added flexibility - Long average life components - Digital measurement data logging - User-friendly filter change - 5.7 inch touch screen - Intuitive menu navigation - in many languages

The Zr-Ox EPC is our standard model for continuous monitoring of residual oxygen. Advantages - Over 20 years of experience in development and optimisation - Top response time and short heat-up phase - Two different sizes for added flexibility - Long average life components - Digital measurement data logging - User-friendly filter change - 5.7 inch touch screen - Intuitive menu navigation - in many languages - Various RS232 protocols that can be changed in the unit for communication with different soldering, packaging soldering, packaging machines, analysers or other equipment and processes - Operation for user and administrator in different levels - Standardised 0/2-5/10 VDC or 00/04-20 mA analogue signal adjustable - 3 backups for storing different unit functions and settings - Display of all alarms and errors

Power Lube IT Management is a powerful software for managing alarms and faults related to remote lubrication control never before designed and intended for maintenance professionals. It is an instrument for fault diagnosis and preventive maintenance technology developed specifically for the application of Improve your maintenance process. Increase productivity, reduce malfunctions, reduce maintenance costs ... How can Power Lube IT Management really help you? Automation of lubrication and maintenance controls Efficient planning and management Rationalization and efficiency of lubrication Real-time machine lubrication anomalies recording Reporting of malfunctions, alarms etc. Standardization of lubrication controls ...

The Power Lube Box Recorder (outdoor) provides for a solid out of the box experience for quick deployment in outdoor and harsh industrial environments. With its industrial grade components, it achieves a high standard of reliability. Power Lube Box Recorder is a gateway collecting and recording data sent remotely by Power Lube Sensors. Our Power Lube Box Recorder can record all data sent up to 100 Power Lube Sensor units. It allows you to connect LoRa wireless network to IP network via WiFi, Ethernet, 4G cellular. LoRa wireless allows users to send data and achieve extremely long ranges at low data rates. The Power Lube Box Recorder has pre-configured to use for different countries.

The patented Power Lube Sensor system can be installed on all lubrication points of the machine. It can be adapted to all kinds of oil and grease pumps installed upstream of the system (supplied via a central lubrication system or automatic lubricators or even gas system lubricator or manual pump, etc.). Description of the Power Lube Sensor ® Precise control and mastered alerts: The Power Lube Sensor Technology cleverly developed for data collection of up to 100 Power Lube Sensor units. Design and functional description: The Power Lube Sensor allows both to control the quantity / volume of lubricant as it passes through the electromechanical system and the remote transmission of alarms related to poor lubrication faults. It also controls the various alarms (battery level fault alarm, lubricant volume fault alarm, operating alarm, etc.) while adapting to all lubrication systems and industrial machine lubrication points system.

Power Lube Box Recorder is a gateway collecting and recording data sent remotely by Power Lube Sensors. Our Power Lube Box Recorder can record all data sent up to 100 Power Lube Sensor units. It allows you to connect LoRa wireless network to IP network via WiFi, Ethernet, 4G cellular. LoRa wireless allows users to send data and achieve extremely long ranges at low data rates. The Power Lube Box Recorder has pre-configured to use for different countries

The guarantee of a robot that is fully isolated from the process Ventilation of the cover to eliminate condensation Integration of stainless-steel rotating rings for reinforced sealing Robot protection can be cleaned quickly and easily: smooth, dirt-repellent surface for easy cleaning, even with strong chemicals and high-pressure cleaners. No yellowing of the robot protection cover: The neutrality of the TEXPRAL B+ fabric prevents the cover from yellowing due to exposure to chemical detergents and disinfectants. Lower maintenance costs for industrial robots Reduced downtime for protected robots Protect your expensive machines from wear and tear: protective robot covers can be easily repaired and ordered once our designers have the dimensions and specifications available The seams are protected by heat-sealed tape.

•Dermatologically Tested. •Gentle on the Hands •Specially Created for Heavy Duties •Specially Designed Double-Sided Toughest Texture for the Toughest Dirt and Messes. •Effectively Removes, Grease, Oil, Dirt, Paint, Ink, Marker, Scuff Marks, Lipstick, and Even Shoe Polish. •Fresh Orange-Scented •HyperFast •Hyper Gentle •Hyper Useful •Hyper Clean

•Dermatologically Tested. •Gentle on the Hands •Specially Created for Heavy Duties •Specially Designed Double-Sided Toughest Texture for the Toughest Dirt and Messes. •Effectively Removes, Grease, Oil, Dirt, Paint, Ink, Marker, Scuff Marks, Lipstick, and Even Shoe Polish. •Fresh Orange-Scented •HyperFast •Hyper Gentle •Hyper Useful •Hyper Clean

Molecular formulaC9H20O2 Molecular weight160.3 CAS number2568-90-3 EC number219-909-0 IUPAC name1-(Butoxymethoxy)butane EC name1.1'-[Methylenebis(oxy)]dibutane

With this animation, we try to give a brief and clear explanation of our vehicle interior system in a playful way. More details on this and possibly other Reinasan systems can be found here on Europages, on our website and on our YouTube channel. We'd love to hear from you! Feel free to send us a message via this platform. Have fun watching!

•Dermatologically Tested. •Gentle on the Hands •Specially Created for Heavy Duties •Specially Designed Double-Sided Toughest Texture for the Toughest Dirt and Messes. •Effectively Removes, Grease, Oil, Dirt, Paint, Ink, Marker, Scuff Marks, Lipstick, and Even Shoe Polish. •Fresh Orange-Scented •Hyper Fast •Hyper Gentle •Hyper Useful •Hyper Clean

Molecular formulaC3H6O2 Molecular weight74.1 CAS number646-06-0 EC number211-463-5 IUPAC name1,3-Dioxolane EC name1,3-Dioxolane

Molecular formulaC7H16O4 Molecular weight164.2 CAS number4431-83-8 EC number224-631-8 IUPAC name2,5,7,10- Tetraoxaundecane EC name2,5,7,10- Tetraoxaundecane

The Tyrolit strip range offers surface treatment tools for industrial and maintenance applications. These strips ensure high efficiency and excellent surface quality for cleaning, deburring and finishing work on metals, composites and plastics. They remove rust, paint and corrosion without damaging the material. Made from durable abrasives, they are available in different grits and compositions and are suitable for manual and automated systems. Tyrolit strips increase productivity in industries such as automotive, aerospace, construction and manufacturing.

PLUS SAFETY MEDICAL Protective Coverall is a high performance chemical protective suit, certified to PPE Directive Category III, Type 3/4/5/6 levels of protection, making it suitable to protect against a range of chemical jets and sprays. with additional design features including enlarged zip pulls and thumb loops, an integrated double-closing storm flap system with and chin flap, convenience of use can be offered without compromising the high level of protection offered. Product Type:Type 3/4/5/6 Chemical Suit Disposable Coverall Material:High performance external barrier film coated to non-woven fabric Zipper:Nylon on polyester braid Elastic:Neoprene rubber (latex free) Tape:Multi-layer composite barrier tape processing workshop dustproof -cleanroom / laboratory isolation dry painting , spray printing - grinding and fiberglass - industry maintenance - powder handling - etc..

Industrial shock absorbers are maintenance-free, ready to install hydraulic components. They have an integrated fixed stop. The adjustable version enables precise adjustment to the desired dampening level. After installation, operate and adjust the shock absorber a few times until the desired braking level is achieved. Exceeding the max. energy intake per hour is possible if temporarily disconnected or the shock absorber is cooled with cylinder exhaust air. The installation position is arbitrary.

Power: 1600 kvA * Input Voltage Range (-20%/+15%) * Smart Voltage Regulation Software * High Voltage Regulation Speed ​​(500 v/s) * High Efficiency (96%) * Over-Current, High Temperature, High- Protection Against Low Voltage and Other Malfunctions. * Designed for Heavy Industrial Working Conditions. * Maintenance-Free, Fully Electronic Voltage Regulation * Quick Correction in Voltage Ups and Downs * Surge Arrester Against Lightning and Voltage Surges (Optional) * Independent Voltage and Load Adjustment for Each Phase * Auto-Test * LCD Screen for Easy Monitoring

The hinge system was specially developed to meet the needs of residential buildings and to ensure resistance in any type of climate. Due to the simple way of mounting and the reduced need for maintenance, it allows industrialized production with time savings and advantageous from a financial point of view. Heel depth 70 mm Sash depth 78 mm Profile thickness 1.5 mm Polyamide bar length 32-35 mm Maximum sash width (L) 1500 Maximum sash height (H) 2600 Maximum depth of glazing 55 mm The maximum weight of the sash 160 Kg Opening possibilities Internal opening: Swinging, oscillating-swinging, oscillating-parallel and oscillating; External opening Swing, projecting-sliding, pivoting with horizontal and vertical fixing