Aluminium cables - Import export

LOOSE TUBE CONSTRUCTION, JELLY FILLED CABLE CORE, WATERTIGHT, RODENT PROTECTION, ALUMINIUM-PE-COMPOSITE-LAYER SHEATH Suited for outdoor use - for fixed laying in cable ducts, conduits or direct burial.

Used as bare overhead conductor for power transmission and distribution lines on aerial circuit that require a larger mechanical resistance than AAC, and a better corrosion resistance than the one produced by the ACSR. The sag characteristics and the strength-toweight ratio is better than AAC / ACSR.

This conductor is also known as aluminium stranded conductor. It is manufactured from electrolytically refined aluminium, having purity of minimum 99.7% AAC is used mainly in urban areas and the spacing is short and the supports are close. All aluminium conductors are made up of one or more strands of aluminium wire depending on the end usage. These conductors are also used extensively in costal because it has a very high degree of corrosion resistance.

This conductor consists of a solid or stranded steel core surrounded by strands of aluminium ACSR CONDUCTOR is available in a wide range of steel varying from 6% up to 40%. The higher strength ACSR CONDUCTORS are used for river crossings, overhead earth wires, installations involving extra long spans etc.. against any given resistance of conductor, ACSR conductor may be manufactured for having a wide range of tensile strength as per requirement. The principal advantage of these conductors are high tensile strength and light weight with longer spans as well as with less supports. Due to the greater diameter of ACSR CONDUCTOR much higher corona limit can be obtained causing big advantages on high as well as extra high voltage overhead lines.

Cable: 0.4 - 220 kV Insulated busbar: 1-35 kV Cable accessories: 10-220 kV

SINC Razzoor Series cable granulator is advanced-level cable and electronic waste recycling machine, with the compact design the machine becomes mobile, it can be easy moved to other locations and works like plug and play machine. The machine is equipped with all needed to work independent, just supply the electricity and you can start to recycle your cable or electro waste, for to separate the coper, metals, lead or other ferrous or nonferrous metals from the plastics.

7/8" aluminum feeder cable for mobile communication transmitting system.

1/2" aluminum feeder cable for mobile communication transmitting system.

secutex protection also for wire ropes secutex protective sleeves in combination with Spanset lifting slings are always the best choice for lifting machinery elements and other loads. Because of the design, the lifting slings are wide, the load is distributed over a relatively large area. But sometimes secutex protective sleeves are also required for wire ropes. The wire ropes have an almost round diameter, the surface area to the load is rather small and the stress per area is high. In general, the use of wire rope sleeves can only be recommended for the lifting of large, round loads, i.e. without sharp or angular edges. There are slotted and also unslotted secutex wire rope protective sleeves available for one or two strands. The slotted variants can easily be assembled afterwards, the closed types, on the other hand, have to be installed during the manufacture of the wire ropes. Please note that the wire ropes often have a larger diameter than the nominal size

The SKDS hinged edgeprotector is a massive edge protector for cable grummets. The edgeprotector flexibly adapts to the load, increasing the radius over critical edges and distributing the lifting forces over a larger area. The cable and load are equally protected. It is available in two versions, featuring either a steel or aluminium hinge.

By means of a hinge, the edge protector SKD can be optimally suited to any load geometry. The edge protector can be quickly secured to the edge of the wire cable by means of mounting slits. The wire cable slides through the secutex clip which remains on the lashing belt despite collisions.

Charge all kinds of smart devices just with 1 cable. Short length avoides kontting. Big logo surface illuminates your brand with LED light.

Mechanical Crimping Pliers Mechanical Lever Crimping Tools Hydraulic Hand Operated Crimping Tools Hydraulic Battery Driven Crimping Tools Hydraulic Crimping Heads Cordless Multifunction Tool for Crimping and Cutting Copper and Aluminium Cables

The cable channels feature a cover that can either be removed by lifting it upwards or pivoted open by up to 90° along the length of the channel. Order made easy. In addition to the pivoting cover, installers also value the optional plastic separating strips, which ensure that the individual hoses, signal lines and power cables in the cable channel can be easily separated and well structured. The separating strips also facilitate overhead assembly. When inserted in the cable channel, they prevent the installed cables and channels from falling out. The separating strips can be opened at any time to allow the installation of further cables. They are also available with mounting holes, which is a new feature for aluminium cable channels. These can be very quickly attached to a BLOCAN profile slot by means of a pivoting mounting clip. Here too, the RK Rose+Krieger product philosophy takes hold – connection without drilling! Simply cut the aluminium profiles to length and assemble them.

Fast assembly and perfect organisation Modern machines contain countless power, data and control cables, along with pneumatic hoses. In large systems, the total length of these can quickly add up to several thousand metres. Cable channels make it easier to organise and assemble these cables. The BLOCAN® cable channel system made from anodised aluminium impresses not only with its attractive design, but also through a multitude of well thought out details, which offer the customer considerable added value and greatly facilitate their work. The cable channels in sizes 40, 40x20, 40x80, 80x40 and 80x80 can be supplied as 6 metre bars or cut to length. They are also available with mounting holes, which is a new feature for aluminium cable channels. These can be very quickly attached to a BLOCAN® profile slot by means of a pivoting mounting clip.

Housing aluminium. Cable sheath PVC. Version Compact sensor and plug design. Flat connector, 8pole, 1x pin. Connection cable, 6wire, ø 3.55–0.3 mm. Cable bend radius, > 17 mm (static). Note Works with magnetic tapes 21725. The reading distance between the sensor and tape must be 0.1 to 2 mm. The sensor is supplied with operating voltage and draws current via the electronics. System accuracy, repeat accuracy and travel speed is dependent on the electronics. Plugin connection to position indicators 21700 and 21702. Technical data Rating IP 67; EN 60529 (sensor head) Shock resistance 2000 m/s², 11 ms; EN 60068227 Vibration resistance 200 m/s², 50 Hz–2 kHz; EN 6006826 Temperature range Ambient temperature 0…60°C Storage temperature 10…70°C Assembly Installation must be carried out using the enclosed user information. A, reading distance sensor/tape ≤ 2 mm B, lateral offset ± 2 mm C, misalignment ± 3° D, pitch gradient ± 1° E, lateral gradient ± 3°

E-Line CTK series hot dipped galvanized cable trays with snap on cover can be easily mounted without using cover brackets thanks to its special twist design in the tray and cover. Heavy Duty Cable Tray With Cover Galvanized, Return Flange, Perforated Painted, 3000 mm standard length

Aluminium Cable LadderExtra Heavy Duty Aluminium Alloy Industrial Cable Ladder KCA AL is designed to satisfy the demand for high performance in all Industrial Markets.

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles coated with plastic • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles coated with plastic • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Ergonomic handle position and shape for optimum power transmission • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For cutting copper and aluminium cable with strong rubber or plastic sheathing • Special cutting geometry and precision cutting for a clean cut without any burrs • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Opening of the blade in each position possible • Optimum leverage, easy handling and minimum effort by ratchet action • Made of special steel, high-strength parts that are especially subject to wear and tear are additionally hardened and tempered

For decades, our precision staple and anchor wire products have been used in high-quality toothbrushes and fine brushes. We are experts in custom-engineering precision toothbrush staple wire to your exacting shape, profile, and material requirements. Using sophisticated wire forming technology, our custom-made anchor and staples wires are renowned worldwide for their increased tuft retention and high pull-out resistance in toothbrush bristles. Advantages As a leader in toothbrush anchor wire technology, we consistently work to tight wire tolerances in the fabrication of simple and complex wire shapes for superior dimensional control. Precision wire geometries that significantly improve tuft retention Tightly controlled alloy purity, consistency and composition for improved performance Improved die wear, formability and platability Stringent quality control to ISO 9001 Short lead times and small batch sizes

Our Electrolytic Copper (C11000) shaped wire is used in magnetic applications such as superconductors in MRI scanners that require high copper content and rectangular cross sections. Electrolytic copper wire products have engineered channels to accept round superconducting wire such as Nb based low temperature wires. We have the expertise to manufacture C11000 copper wire to your exacting specifications and wire shapes. Advantages Our C11000 material for channel wire is produced in long lengths to minimize joints and is tightly tolerance to ensure field integrity. Advantages include: Sophisticated powder metallurgy process achieves high purity, consistency and close composition control Improved die wear, formability and platability Superior dimensional control Stringent quality control to ISO 9001

Our weld wire sheathing material is used in both flux cored wire and metal cored welding wire processes. The wire sheathing is formed into a tubular product by our customers and the center of the tube contains the ‘fill’ (flux, metal powders, etc) to bring the wire to the desired chemistry. The finished wire is used across a wide breadth of industries in processes such as: Submerged Arc Welding (SMAW) Gas Metal Arc Welding (GMAW) Wire Arc Thermal Spray Flux cored welding wire producers use our metal sheathing materials to prepare finished wire for thermal spray and in surfacing applications, in high temperature and corrosive environments. Cobalt Our Ductile Cobalt Alloys are used to produce wire to hardface applications in the construction, mining, and oil and gas industry. Our proprietary process allows us to offer high Cobalt containing products (91% Cobalt or more) while maintaining a highly ductile strip for wire forming.

Power cable with copper cores, EPR insulation, PVC sheath, shield: copper foil, tape or braids, armour: zinc-coated steel wires, aluminium tapes, zinc-coated steel tapes, aluminium wires.Application: these cables can be used indoor or outdoor, and in the air and in the ground. Fire resistant/flame-retardant/low smoke/low smoke and toxic fumes/cold resistant/shielded/armoured/halogen free)

Facts: reely rotating and swivelling screw-type spring hook for suspension Housing and housing cover of chill-cast aluminum Cable drum of high-strength chill-cast aluminum Closed ball bearings High-strength special suspension spring High-strength steel cable Infinitely adjustable cable stop buffer Screw-type spring hook for load suspension Infinitely variable load setting via endless screw Available without (Type 7235) or with (Type 7236) ratchet lock Safety: GS Certificate / DIN15112 / Made in Germany

Facts: Freely rotating and swivelling safety hook for suspension, adjustable Housing and housing cover of high-strength pressure-cast aluminum Cable drum of high-strength pressure-cast aluminum Closed ball bearings on both sides High-strength, encapsulated special suspension spring High-strength steel cable • Infinitely adjustable cable stop buffer Cable wedge allows infinite adjustment of cable length Screw-type spring hook for load suspension Infinitely variable load setting via endless screw Patented freewheel protects against overrotation when the spring is released Available with and without manual lock.