Results for
JSC SAKCABLE (SAKCABLE)
Georgia
For transmission and distribution of electric power at stationary devices with rated voltage 0,660kV and 1 kV frequency 50Hz. For stretching in the air where there is no danger of mechanical damage of the cable, also for laying into channels without influence of stretching forcesThe aluminum cores with section 2,5-25mm2 inclusive are produced of single wire of 1 class flexibility according to Gost standard 22483-2012. Number of cores in the cable 2,3.The aluminum cores with section 2,5-25mm2 inclusive are produced of single wire of 1 class flexibility according to Gost standard 22483-2012. Number of cores in the cable 2,3.
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
For lighting and power circuits while stationary laying in electric devices, for inflexible installation in electric devices, machinery, mechanisms and industrial machines for rated voltage up to 450V (for networks 450/750V) frequency up to 400 Hz or permanent voltage 1000V. Is used for laying in empty places of steel pipes and construction structures, where there are not frequent bends of the conductor. The conductor is flame retardant.The aluminum cores with section 2,5:16mm2 inclusive are produced with one wire of 1 class flexibility, according to standard 22483 , 25-240mm2 are produced with twisted multi-core wire 2 class flexibility according to standard 22483-2012. Insulation of the conductor is made in different colors Label attached to wooden drum or bundle (coils). An inscription is made on conductor core: JSC Sakcable, cable brand, metric.
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
For transmission and distribution of electric power at stationary devices with rated voltage 0,660kV and 1 kV frequency 50Hz. For straining in the air where there is no danger of mechanical damage of the cable, also for laying into channels without influence of stretching forcesInstallation temperature: -150C. The max. allowable core heating temperature in short circuit with duration of not more than 4 seconds must not be above 1600C The conductor is resistant to 98% relative air humidity under +350C conditions Conductive lobe for long-term allowable heating temperature +700CThe aluminum cores with section 2,5-50mm2 inclusive are produced with single wire of 1 class flexibility, 70-240mm2 inclusive with twisted multi-core wires of 2 class flexibility, according to standard 22483-77. Number of cores in the cable 1,2,3,4,5
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
For laying in ground, open air, in concrete, inside buildings, in cable channels, in electrical stations, in industrial plants and in the commutation systems where there is no danger of mechanical damage of the cable. Because the permissible operating temperature of the conductor is + 90 0C. Core isolation (XLPE) polyethylene provides higher current loadThe aluminum cores with section 2,5-16mm2 inclusive are produced of single wire of 1 class flexibility, 25-240mm2 inclusive with twisted multi-core wires of 2 class flexibility, according to standard IEC 60228 : 2004. Number of cores in the cable 1,2,3,4,5.Label attached to wooden drum or bundle, or in case of request of the customer with inscription on top: “JSC Sakcable” cable brand, date of production. Labeling of conductive cores with colors or figures 0,1,2,3,4 with inscription on the top of insulated cores
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
The non-halogen elevated fire hazard cable is designed to transmit and distribute electricity to stationary devices at nominal voltages of 0.660 kW and 1 Hz at 50 Hz. In the air, with anti-ultraviolet radiation protection and where there is no danger of mechanical damage of the cable, as well as for low corrosion activity in the soil (in the trenches), but in a protective tube.Aluminum wires with a cross section of 2.5-50 mm2 are made with single wire first class flexibility up to 70-240 mm2 with twisted multi-wire wires with 2nd class flexibility, standard IEC60228: 2004. At the request of the customer, it is allowed to make multi-wire cross section 16: 50. The number of cores in the cable: 1,2,3,4,52,5-16mm2 450 m 25-70mm2 300 m 95-240mm2 200 m In case of delivery coils (“bundle”), the construction length is agreed with the customer. It is allowed to make cables of different construction lengths.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
JSC SAKCABLE (SAKCABLE)
Georgia
For fixed connection on electric appliances, equipment, gathering mounts of electric distribution appliances for rated alternating voltage 1000V. Used for laying in buildings, channels, tunnels if there is no danger of mechanical influence on the cables. During laying in single layer the cable is flame retardantThe structure of conductor core is single-wire and conforms to 1 class flexibility according to the standard 22483-2012. The section of conductor core is 2,5; 4; 6; 10mm2. Number of cores in the cable: 2.5mm2-4, 5, 7, 10, 14, 19; 27; 37 4: 10mm2-4, 7, 10 During laying in single layer the cable is flame retardantIn each bundle by existence of counting pair, which differs in color from other cores. Labeling can be done by means of inscription of separate numbers on insulated cores or distinctive colors of insulation can be used. While numeric labeling the color of figures must be different from the color of the insulation of the core. On the surface of the cover an inscription
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
For transmission and distribution of electric power at stationary devices with rated voltage 0,660kV and 1 kV frequency 50Hz. For straining in the air where there is no danger of mechanical damage of the cable, also for laying into channels without influence of stretching forcesThe copper cores with section 1,5-6mm2 inclusive are produced of single wire of 1 class flexibility, 10-240mm2 inclusive with twisted multi-core wires of 2 class flexibility, according to standard IEC 60228:2004. Number of cores in the cable 1,2,3,4,52,5-16mm2-450m; 25-70mm2-300m; 95-240mm2-200min case of supply in bundles the construction length is agreed with the customer. In case of agreement with the customer cables of different construction lengths can be produced
Request for a quoteJSC SAKCABLE (SAKCABLE)
Georgia
The aluminum cores with section 2,5-50mm2 inclusive are made of single wire with 1st class flexibility, 70-240mm2 inclusive with twisted multi-core wires with 2 class flexibility, according to Gost standard 22483-77. Number of cores in the cable 1,2,3,4,5The insulated cores are made of different colors, an inscription is made on the cover of the conductor “JSC Sakcable” cable brand, year of production. Labelling of cores with colors or figures 0,1,2,3,4.
Request for a quoteResults for
Aluminium cables - Import exportNumber of results
9 ProductsCountries
Company type