Aluminium cables - Import export

secutex protection also for wire ropes secutex protective sleeves in combination with Spanset lifting slings are always the best choice for lifting machinery elements and other loads. Because of the design, the lifting slings are wide, the load is distributed over a relatively large area. But sometimes secutex protective sleeves are also required for wire ropes. The wire ropes have an almost round diameter, the surface area to the load is rather small and the stress per area is high. In general, the use of wire rope sleeves can only be recommended for the lifting of large, round loads, i.e. without sharp or angular edges. There are slotted and also unslotted secutex wire rope protective sleeves available for one or two strands. The slotted variants can easily be assembled afterwards, the closed types, on the other hand, have to be installed during the manufacture of the wire ropes. Please note that the wire ropes often have a larger diameter than the nominal size

By means of a hinge, the edge protector SKD can be optimally suited to any load geometry. The edge protector can be quickly secured to the edge of the wire cable by means of mounting slits. The wire cable slides through the secutex clip which remains on the lashing belt despite collisions.

The SKDS hinged edgeprotector is a massive edge protector for cable grummets. The edgeprotector flexibly adapts to the load, increasing the radius over critical edges and distributing the lifting forces over a larger area. The cable and load are equally protected. It is available in two versions, featuring either a steel or aluminium hinge.

Mechanical Crimping Pliers Mechanical Lever Crimping Tools Hydraulic Hand Operated Crimping Tools Hydraulic Battery Driven Crimping Tools Hydraulic Crimping Heads Cordless Multifunction Tool for Crimping and Cutting Copper and Aluminium Cables

The cable channels feature a cover that can either be removed by lifting it upwards or pivoted open by up to 90° along the length of the channel. Order made easy. In addition to the pivoting cover, installers also value the optional plastic separating strips, which ensure that the individual hoses, signal lines and power cables in the cable channel can be easily separated and well structured. The separating strips also facilitate overhead assembly. When inserted in the cable channel, they prevent the installed cables and channels from falling out. The separating strips can be opened at any time to allow the installation of further cables. They are also available with mounting holes, which is a new feature for aluminium cable channels. These can be very quickly attached to a BLOCAN profile slot by means of a pivoting mounting clip. Here too, the RK Rose+Krieger product philosophy takes hold – connection without drilling! Simply cut the aluminium profiles to length and assemble them.

Fast assembly and perfect organisation Modern machines contain countless power, data and control cables, along with pneumatic hoses. In large systems, the total length of these can quickly add up to several thousand metres. Cable channels make it easier to organise and assemble these cables. The BLOCAN® cable channel system made from anodised aluminium impresses not only with its attractive design, but also through a multitude of well thought out details, which offer the customer considerable added value and greatly facilitate their work. The cable channels in sizes 40, 40x20, 40x80, 80x40 and 80x80 can be supplied as 6 metre bars or cut to length. They are also available with mounting holes, which is a new feature for aluminium cable channels. These can be very quickly attached to a BLOCAN® profile slot by means of a pivoting mounting clip.

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles coated with plastic • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles coated with plastic • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Ergonomic handle position and shape for optimum power transmission • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For cutting copper and aluminium cable with strong rubber or plastic sheathing • Special cutting geometry and precision cutting for a clean cut without any burrs • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Opening of the blade in each position possible • Optimum leverage, easy handling and minimum effort by ratchet action • Made of special steel, high-strength parts that are especially subject to wear and tear are additionally hardened and tempered

Cable fixation, to secure cables to aluminum profiles different versions: Cable Binding Block univeral or with customized hammer Clip Cable Binder - 1 or 2 chambers, to fix cables without the need for cable ties, can be opened and closed again Cross Cable Binder Block, with / without Velcro (bracket), to secure cables to aluminum profilesin two directions Cross Cable Binder Block D28 for Tubular Frame Profiles, to fasten cables and tubes parallel to the slot Snap-Cable-Binding, to attach of cables securely and quick and without cable ties, with strain relief different assembly: — using a hammer head nut, screw, slot nut, etc. — with Hammer, can be mounted into the slot by a quarter turn — click-in assembly — clampable Material: PA plastic / glass fiber reinforced; Plastic PE; FPM 70; electrostatical discharging Color: black other sizes, other colors on request

Monitor Work Station SIT / STAND 4-axis, Profile Attachment 40 (Set) For mounting of monitors with 2 - 8 kg, mounting plate VESA MIS-D 75/100 compatible, adjustable viewing angle and height; fold-up holder with wrist rest for keyboard up to 2.5 kg, incl. left or right pull-out shelf for mouse, as well as holders for hand scanner and mouse; 360° mounting flange can be attached lateral, transverse, or on the face of the profile, if attached on the front face, the core hole of the respective profile must be M8 threaded Material Monitor Work Station: Steel / aluminum / plastic #b Cable management cover: Plastic #b Mounting flange: Aluminum die-cast #b Screws: Steel Surface/Color: Monitor Work Station: Gray Lacquered Cable management cover: Gray Lacquered Mounting flange: Alu color Zinc plated

Facts: reely rotating and swivelling screw-type spring hook for suspension Housing and housing cover of chill-cast aluminum Cable drum of high-strength chill-cast aluminum Closed ball bearings High-strength special suspension spring High-strength steel cable Infinitely adjustable cable stop buffer Screw-type spring hook for load suspension Infinitely variable load setting via endless screw Available without (Type 7235) or with (Type 7236) ratchet lock Safety: GS Certificate / DIN15112 / Made in Germany

Ergonomic support for heavy duty hand tools. Facts: Freely rotating and swivelling safety hook for suspension, adjustable Housing and housing cover of high-strength chill-cast aluminum Cable drum of high-strength chill-cast aluminum Closed ball bearings on both sides High-strength, encapsulated special suspension spring High-strength steel cable Infinitely adjustable cable stop buffer Cable wedge allows infinite adjustment of cable length Screw-type spring hook for load suspension Patented freewheel protects against overrotation when the spring is released Infinitely variable load setting via endless screw

Special tool balancer with double cable for extra safety. Facts: Dual-cable design Freely rotating and swivelling safety hook for suspension, adjustable Housing and housing cover of high-strength pressure-cast aluminum Cable drum of high-strength chill-cast aluminum Closed ball bearings on both sides High-strength, encapsulated special suspension spring High-strength steel cables Infinitely adjustable cable stop buffer Cable wedge allows infinite adjustment of cable length Screw-type spring hook for load suspension Infinitely variable load setting via endless screw Patented freewheel protects against overrotation when the spring is released

Facts: Freely rotating and swivelling safety hook for suspension, adjustable Housing and housing cover of high-strength pressure-cast aluminum Cable drum of high-strength pressure-cast aluminum Closed ball bearings on both sides High-strength, encapsulated special suspension spring High-strength steel cable • Infinitely adjustable cable stop buffer Cable wedge allows infinite adjustment of cable length Screw-type spring hook for load suspension Infinitely variable load setting via endless screw Patented freewheel protects against overrotation when the spring is released Available with and without manual lock.

Facts: Compact design with a single suspension spring Freely rotating and swivelling screw-type spring hook for suspension Housing and housing cover of high-strength chill-cast aluminum Cable drum of high-strength chill-cast aluminum Closed ball bearings • High-strength special suspension spring • High-strength steel cable • Infinitely adjustable cable stop buffer • Infinitely variable load setting via endless screw Safety: Closed unit Rigid, impact-resistant design Suspension via screw-type spring hook (rotating and swivelling design) Includes safety expansion chain as fall protection Integrated mechanism for locking the cable drum High-strength special suspension spring Spring fracture safeguard is standard Cable overload protection via cable extension limit stop Screw-type spring hook for load suspension GS-certified

For the highest demands for quality and function. With extra bright CREE-LED for powerful light. Mode selector for fast selection of the desired function. Several features: 100 % - 50 % - 20 % - 2 % - strobe - SOS. Tactical on/off switch with soft-touch function. With integated Li-Ion-battery 3.7 V/2.5 Ah. Including 100 - 240 V AC, 50/60 Hz power adapter and 12 - 24 V car charger and USB charger cable. Resistant aluminum casing with anti-roll and carrier handle. In blister packaging. LEDs: CREE Luminous flux: 850 lm Headlight range: 270 m Light duration: 2 h Measurements: L = 160 mm; Ø = 40 mm

for hexagonal crimp of Aluminium Steel Cables with Aluminium tube: 120/20; 150/25 DIN 48083

for hexagonal crimp of Aluminium Steel Cables with Steel tube: 50/8 DIN 48083

for hexagonal crimp of Aluminium-Steel Cables with Steel tube: 120/20; 150/25 DIN 48083

for hexagonal crimp of 10mm² Cu and Aluminium-Steel Cables with Steel tube: 16/2,5; 25/4; 35/6 DIN 48083

The Eltex cable rewinders are the optimal accessory for our grounding devices or, in the passive version, also as a simple grounding cable reel for safe storage of the grounding cable and the grounding clamp. The cable rewinders 607KR rewind the grounding cable after use of the ground contactor, protecting the cable from damage. Several versions are available: The cable rewinders 601KR/AW and 601KR/DW come in an impact resistant aluminum casing and the cable rewinder 601KR/KW comes in an impact resistant plastic casing. All cable rewinders are appropriate for use in the explosion hazardous areas 1 and 21. Different designs of ground clamps are available.