Lifting ring - Import export

We produce for the martitim needs: railings, tubes, handrails, fittings, stairs, floors, rope tensioner, shroud spanner, skirting boards, aeration, lifting rings, clamps, rod holders, anchors, big-sized parts, angles, tees, safeguarding, thimbles, pressing sleeves and much more... Take profit also from our 3D-printign service for plastic & silicon parts. We realize your individual demans!

Reference surfaces precision machined Note: Ring bolts for lifting are supplied. A cover prevents the cavities filling with swarf. Drawing reference: machined faces: +0.2 mm/ +0.5 mm unmachined faces: ±2 mm

Grid hole pitch 25 ±0.01 mm or 50 ±0.01 mm. Grid hole plugs and ring bolts for lifting are supplied. These subplates conform to subplates for machine tools according to DIN 55201 and JIS 6337-1980. The subplates are also available without grid holes. See plates without a value for “A” (xxx/-). Other dimensions on request.

Compact and light design, full loading on all sides. 4x safety factor against breakage in all loading axis. Rotatable 360°. Link swivel range max. 180°. The ball bearing allows the ring to rotate even under load. Lifting or securing loads, swivel rings have many uses. For the loading capacity to be valid it must be ensured that the ring is in line with the load. The swivel face must lie flat on the support beam and the screw must always be screwed in fully.

The portable chemical WC equipped with its own reservoir for wastewater with chemical control. Does not require energy consumption Removable reservoir system for wastewater Wheels and handle for easy handling With adequate dimensions to pass through doors High resistance to impacts and weather lifting rings door with lock insensitivity to corrosion recyclable

Portable WC with mains connection, made with durable materials Features It does not require energy consumption. Removable reservoir system for wastewater Wheels and handle for easy handling. With adequate dimensions to pass through doors. High resistance to impacts and weather. Lifting rings. Lockable door. Insensitivity to corrosion. recyclable Dimensions: 1000x790x2200mm Materials: Linear polyethylene with UV protection (cabin) | Non-slip Maritime Plywood (flooring) | Europe BTW (basin) | Europe PP (top)

FX-C lifting magnets have a round, multipole clamping surface, designed for lifting rings, sleeves, bearing housings, flange plates and similar workpieces.The load specification is valid for full-surface mounting on workpieces which cover D inside to D outside (see table Dimensions), for workpieces with a smaller mounting surface an approximate maximum workpiece weight of 3.5 kg per cm² clamping surface can be calculated. For serial workpieces, a documented test should confirm the safety factor 3.

These flange type units is made of stainless steel and fix the hub positively against their extended flange preventing axial movement during tightening. Applied wherever self-centering action and good concentricity of mounted components are essential and hubs with straight-thru bores are used. Available sizes: Metric series shafts from 20 mm to 150 mm dia. and Inch series for shafts from 1” to 4” diameter. Excellent concentricity and very easy to dismantle – these Locking Assemblies provide particularly good concentricity between the clamped parts. The flange is reinforced at the critical point, preventing bending or lifting of the inner ring during assembly and thereby ensuring easy dismantling. High rotation speed – the dimensional accuracy of the RfN 7013 Locking Assemblies allows their use in applications with higher rotational speeds. High radial loads – the material strength of the RfN 7013 Locking Assemblies makes them especially suitable for applications with high radial...

These flange type units fix the hub positively against their extended flange preventing axial movement during tightening. Applied wherever self-centering action and good concentricity of mounted components are essential and hubs with straight-thru bores are used. Available sizes: Metric series shafts from 20 mm to 150 mm dia. and Inch series for shafts from 1” to 4” diameter. Excellent concentricity and very easy to dismantle – these Locking Assemblies provide particularly good concentricity between the clamped parts. The flange is reinforced at the critical point, preventing bending or lifting of the inner ring during assembly and thereby ensuring easy dismantling. High rotation speed – the dimensional accuracy of the RfN 7013 Locking Assemblies allows their use in applications with higher rotational speeds. High radial loads – the material strength of the RfN 7013 Locking Assemblies makes them especially suitable for applications with high radial loads. Axial hub positioning –...

These Locking Assemblies are of single-taper design with a self-locking taper providing good self-centering action and concentricity, as well as increased torque capacity. A pre-centering hub section is not required. Integral push-off screws for disassembly are provided. This unit can be placed deep inside a bore due to it’s design. Available sizes: Metric series shafts from 20 mm to 150 mm dia. and Inch series for shafts from 1” to 4” diameter. Excellent concentricity and very easy to dismantle – these Locking Assemblies provide particularly good concentricity between the clamped parts. The flange is reinforced at the critical point. This prevents a bending and lifting of the inner ring during installation and therefore a good dismantling is ensured. Higher Rotation Speed – the Locking Assemblies remain true-to-form during assembly and so they are suitable in applications with higher rotational speeds. High radial loads – the material strength of the RfN 7013 Locking Assemblies...

Cylindrical and conical bottom Upper trap door with quick closure diameter 400 mm Stainless steel safety valve in DIN 50 Reassembly column with removable wash ball and 2" TriClamp butterfly valve Ladder support Cooling jacket H. 900 mm Thermometer Stainless steel taster DIN 15 Clearance on the cone with stainless steel butterfly valve 2" TriClamp connection 4 adjustable feet with reinforcement bars Total drain with 90° elbow + stainless steel butterfly valve 2" TriClamp connection Socket for PT 100 probe 2 lifting rings

Cylindrical and conical bottom Upper trap door with quick closure diameter 400 mm Stainless steel safety valve in DIN 50 Reassembly column with Removable wash ball 2" TriClamp butterfly valve Ladder support Cooling jacket H. 750 mm Thermometer Stainless steel taster DIN 15 Clearance on the cone with stainless steel butterfly valve 2" TriClamp connection 4 adjustable feet with reinforcement bars Total drain with 90° elbow + stainless steel butterfly valve 2" TriClamp connection Socket for PT 100 probe 2 lifting rings

Top hatch diameter 400 mm centered 1 rectangular door 420 x 530 mm with exterior opening 1 partial drain 1 total drain with STAINLESS STEEL CONNECTOR DN 40 MACON 4 stainless steel feet, height 500 mm 2 cooling belts 5 + 2 rings H 860 mm + H. 410 mm 1 1/4 '' inlet and outlet 1 stainless steel DIN 15 tasting tap 1 level valve Ø 20 with stainless steel protection 1 clock thermometer 1 socket for probe 1 nameplate Vacuum lifting rings

The model K 26 is a robust stud welding gun, especially for studs ø 22 – 25 mm Ideal for welding shear connectors SD 25 mm Ideal for through-deck-welding td Most suitable for long shear studs Adjustable hydraulic plunge damper Standard support with 3 legs Body: fibre-glass reinforced polyamide Lifting ring system with length compensation up to 8mm Control cable plug (4 wire) Optimal Integrated shielding gas device

Brushed exterior finish Interior mirror polished finish Upper hatch Ø 400 mm + 2 turns around the door H. 300 mm Probe socket Positioned flush with the ferrule bottom Stainless steel DIN15 tasting tap Ø 20 level valve with stainless steel protection Stainless steel ladder support bar Vacuum lifting rings Clock thermometer Clear draft and total emptying with stainless steel ball valves on 100x100 square flange Exit 40 MACON

Flat inclined bottom slope 4% Stainless steel DIN 15 tasting tap Level valve diameter 20 with stainless steel protection Partial drain with 100x100 square flange and 40 Macon outlet valve Total drain with square flange 100x100 and valve outlet 40 Macon Rectangular door 420 x 530 mm positioned at the bottom of the ferrule NEW MODEL with 5 adjustable stainless steel feet (H. 625 mm) Complete air kit with pump and pressure gauge 316L stainless steel floating hat Gallows Lifting winch Clock thermometer Probe socket Stainless steel ladder support bar Vacuum lifting rings Cooling coil with 5 turns on the shell H. 710 mm Cooling coil with 2 turns on the shell H. 300 mm

Vertical cylindrical on feet Eccentric conical dome Conical bottom slope 38 % Interior and exterior finish glazed 2B Decentered chimney Ø 400 mm and height 300 mm ELICA 316L stainless steel antiretention hatch 3 simple male DIN 80 fittings on the dome Double acting ELICA 1000 HL stainless steel 316L valve, horn mounting 5 lifting rings including 1 at the bottom of the tank Support + manufacturer's plate 1 single male DIN 65 fitting in ferrule 1 single male DIN 65 fitting in ferrule Taken from the ground 5 thermal regulation rings with water I / O sleeve 4.75 m2 5 heating rings with water I / O sleeve 4.75 m2 Total thermoregulation area 9.5 m2> Thermoregulation ratio per 100 HL 6.31 m2 Tapered connection + stainless steel faceplate for agitator mounting Full stainless steel buffer + EPDM seal for stirring nozzle stirring Total drain pipe + male at the end of DIN 65 piping 4 outside legs, tank height 800 mm Stainless steel flat reinforcement belt 150 x 5

TECHNICAL SPECIFICATIONS - Reference : 004661 - Model : SPAIP5000SER - Effective capacity : 4880 Litres - 304 stainless steel wine rack - Flat bottom with 4% slope - DIN 15 stainless steel tasting tap - Level tap diameter 20 with stainless steel protection - Partial drain with 100x100 square flange and MACON 40 outlet valve - Total drain with 100x100 square flange and MACON 40 outlet valve - Rectangular door 420 x 530 mm positioned at bottom of shell - 3 adjustable stainless steel feet (500 mm high) - Air kit complete with pump and pressure gauge - Air float complete in 316L stainless steel - Gallows - Lifting winch - Clock thermometer - Probe socket - Stainless steel ladder support bar - Vacuum lifting rings - Cooling coil with 4 turns on shell H. 560 mm - Cooling coil with 2 turns on shell H. 300 mm DIMENSIONS - Height 3700 mm (with jib) - Height 3000 mm (without bracket) - Outside diameter: 1666 mm - Inside diameter: 1600 mm

TECHNICAL CHARACTERISTICS - Model : STOIP SER 2500 SPEC - Effective capacity : 2547 litres - Brushed exterior finish - Mirror-polished interior finish - Top door Ø 400 mm - Cooling coil: 4 turns H. 560 mm + 2 turns around the door H.300 mm - Socket for probe - 3 adjustable stainless steel feet H: 500 mm - Rectangular door: 420 x 530 mm - Positioned flush with the bottom of the shell - Stainless steel taster tap DIN15 - Level tap Ø 20 with stainless steel protection - Stainless steel ladder support bar - Vacuum lifting rings - Thermometer with clock - Clearance and total emptying with stainless steel ball valves on 100x100 square flange - Outlet 40 MACON DIMENSIONS - Diameter: 1400 mm - Height : 2445 mm

Flat inclined bottom slope 4% DIN 15 stainless steel tasting tap Level 20 diameter tap with stainless steel protection Partial drain with square flange 100 x 100 and outlet valve 40 MACON Total drain with square flange 100 x 100 and outlet valve outlet 40 MACON Rectangular door 420 x 530 mm positioned at the bottom of the shell 5 adjustable stainless steel feet (h. 625 mm) Complete air kit with pump and pressure gauge INOX 316L floating hat Stem Lifting winch Clock thermometer Socket for prob Stainless steel ladder grab bar Vacuum lifting rings Cooling coil with 5 turns on the ferrule H. 860 mm Cooling coil with 2 turns on the ferrule H. 410 mm

Model STOIP7500 B Total capacity 8117 liters Top hatch diameter 400 mm centered 1 rectangular door 420 x 530 mm with exterior opening 1 partial drain 1 total drain with STAINLESS STEEL CONNECTOR DN 40 MACON 4 stainless steel feet, height 500 mm 2 cooling belts 5 + 2 rings H. 860 mm + H. 410 mm 1 1/4 '' inlet and outlet 1 stainless steel DIN 15 tasting tap 1 level valve Ø 20 with stainless steel protection 1 clock thermometer 1 socket for probe 1 nameplate Vacuum lifting rings

TECHNICAL SPECIFICATIONS - Vertical cylindrical on legs - Off-centre conical dome - 38% sloping conical base - Interior and exterior finish: glazed 2B - Off-centre chimney diam. 400 mm and height 300 mm - ELICA 316L stainless steel anti-retention top flap - Oval ELICA autoclave door 308x440 mm, inside opening at bottom of shell - 3 single male DIN 80 connections on the dome - Oval autoclave door ELICA 308x440 mm internal opening at bottom of shell - Double-acting ELICA 1000 HL stainless steel 316L horn-mounted valve - 5 lifting rings, including 1 at bottom of tank - Bracket + manufacturer's plate - 1 single male DIN 65 connection in shell - 1 single male DIN 65 ferrule connection - Earth connection - Total drain pipe + male at end of pipe DIN 65 DIMENSIONS AND WEIGHT - Diameter: 2420 mm - Height : 4517 mm - Weight : 754 Kg

TECHNICAL SPECIFICATIONS - Catalogue number : 005729 - Vertical cylindrical on feet - Off-centre conical dome - 38% sloping conical bottom - Interior and exterior finish: glazed 2B - Off-centre chimney Ø 400 mm and height 300 mm - 316L ELICA stainless steel anti-retention top flap - 3 single male DIN 80 connections on the dome - Double-acting ELICA 1000 HL stainless steel 316L horn-mounted valve - 5 lifting rings, including 1 at the foot of the tank - Support + manufacturer's plate - 1 single male DIN 65 ferrule connection - 1 single male DIN 65 ferrule connection - Earth connection DIMENSIONS and WEIGHT - Diameter: 2420 mm - Height : 4517 mm - Weight: 975 kg

TECHNICAL SPECIFICATIONS - Reference : 006993 - Vertical cylindrical tank with flat base, 3% slope - Vertical rectangular door with external opening 410x530 with closing flap and lip - Non-return SIM level with left-hand scale - Stainless steel piston tasting tap with 15x21 sleeve - Non-detachable 53 mm diameter winding column - Dial thermometer - Total drain diam. 83 with ball valve diam. DN70 macon and PVC plug + decanter elbow and filtration grid - Ladder support - 500 dia. anti-retention lever trapdoor with 4 studs - Neutral gas connection with 33x42 spigot + plug - 2 lifting rings - Earthing lug - Gangway support U fold 80xx40x2,5 DIMENSIONS - Diameter: 3200 mm - Height: 4000 mm - Weight: 900 kg

TECHNICAL SPECIFICATIONS - Reference : 006945 - 304L stainless steel tank - Storage tank - Vertical cylindrical on legs - Off-centre conical dome - Conical bottom with 38% slope - Interior and exterior finish: glazed 2B - Off-centre chimney diam. 400 mm and height 300 mm - ELICA 316L stainless steel anti-retention top flap - Oval ELICA autoclave door 308x440 mm, inside opening at bottom of shell - 3 single male DIN 80 connections on the dome - Double-acting ELICA 1000 HL stainless steel 316L horn-mounted valve - 5 lifting rings, 1 of which is at the foot of the tank - Support + manufacturer's plate - 1 single male DIN 65 ferrule connection - 1 single male DIN 65 ferrule connection - Weight : 928 Kg DIMENSIONS - Diameter: 2470 mm - Height : 5525 mm

TECHNICAL SPECIFICATIONS - Vertical cylindrical on legs - Off-centre conical dome - Conical base with 38% slope - Interior and exterior finish: glazed 2B - Off-centre chimney Ø 400 mm and height 300 mm - ELICA 316L stainless steel anti-retention top flap - Oval ELICA autoclave door 308 x 440 mm with internal opening at bottom of shell - 3 single male DIN 80 connections on the dome - Double-acting ELICA 1000 HL stainless steel 316L horn-mounted valve - 3 lifting rings, 1 of which is at the foot of the tank - Bracket + manufacturer's plate - 1 single male DIN 65 ferrule connection - 1 single male DIN 65 ferrule connection - Earth connection - Total drain pipe + male DIN 65 end fitting - 4 external feet, height 800 mm DIMENSIONS and WEIGHT - Diameter: 2000 mm - Height : 4450 mm - Weight : 585 Kg

304 stainless steel tank SPAIP SER 2300 model 304 stainless steel wine keeper Flat bottom with 4% slope Bottom thickness 2.0 mm ferrule 1.5 mm 316L stainless steel floating hat Complete pneumatic system 6419 Swivel crane with stainless steel handle Floating hat lifting winch 3 stainless steel feet H. 500 mm adjustable + 80 mm adjustable Rectangular door 420x530 mm positioned flush with the bottom of the ferrule Swivel crane with stainless steel handle Cooling coil with 4 rings on the ferrule 2 additional cooling rings on the door Thermowell for probe positioned at the back of the tank Clock thermometer with thermowell Stainless steel DIN 15 tasting tap Level valve Diameter 20 with stainless steel protection clear draft and total drainage with square flange 100 x 100 + ball valve on flange outlet 40 MACON Lifting rings Stainless steel ladder support bars Diameter 1400 mm Height (shell) 1500 mm Height (total) 2600 mm (with stem)

Swivel stools: 5-arm plastic base, black, or 5-arm polished aluminium base, friction braked double castors for smooth floors or for carpeting, height adjustment 500 mm to 690 mm by means of “anatomic-lift” gas spring, with hand ring release, chromium-plated column, seat upholstered with leatherette acc. to colour chart. Examination seats: specially designed upholstered seat with leatherette cover acc. to colour chart, with or without backrest, height adjustment from 490 to 690 mm by means of gas spring, with foot ring release. 5-arm base powder coated in grey aluminium RAL 9007, with antistatic plastic castors Ø 50 mm for smooth/hard floors or for carpeting, with perimetral black bumper protection Safe working load: 135 kg.