Lifting ring - Import export

We produce for the martitim needs: railings, tubes, handrails, fittings, stairs, floors, rope tensioner, shroud spanner, skirting boards, aeration, lifting rings, clamps, rod holders, anchors, big-sized parts, angles, tees, safeguarding, thimbles, pressing sleeves and much more... Take profit also from our 3D-printign service for plastic & silicon parts. We realize your individual demans!

Reference surfaces precision machined Note: Ring bolts for lifting are supplied. A cover prevents the cavities filling with swarf. Drawing reference: machined faces: +0.2 mm/ +0.5 mm unmachined faces: ±2 mm

Grid hole pitch 25 ±0.01 mm or 50 ±0.01 mm. Grid hole plugs and ring bolts for lifting are supplied. These subplates conform to subplates for machine tools according to DIN 55201 and JIS 6337-1980. The subplates are also available without grid holes. See plates without a value for “A” (xxx/-). Other dimensions on request.

Compact and light design, full loading on all sides. 4x safety factor against breakage in all loading axis. Rotatable 360°. Link swivel range max. 180°. The ball bearing allows the ring to rotate even under load. Lifting or securing loads, swivel rings have many uses. For the loading capacity to be valid it must be ensured that the ring is in line with the load. The swivel face must lie flat on the support beam and the screw must always be screwed in fully.

The portable chemical WC equipped with its own reservoir for wastewater with chemical control. Does not require energy consumption Removable reservoir system for wastewater Wheels and handle for easy handling With adequate dimensions to pass through doors High resistance to impacts and weather lifting rings door with lock insensitivity to corrosion recyclable

Portable WC with mains connection, made with durable materials Features It does not require energy consumption. Removable reservoir system for wastewater Wheels and handle for easy handling. With adequate dimensions to pass through doors. High resistance to impacts and weather. Lifting rings. Lockable door. Insensitivity to corrosion. recyclable Dimensions: 1000x790x2200mm Materials: Linear polyethylene with UV protection (cabin) | Non-slip Maritime Plywood (flooring) | Europe BTW (basin) | Europe PP (top)

FX-C lifting magnets have a round, multipole clamping surface, designed for lifting rings, sleeves, bearing housings, flange plates and similar workpieces.The load specification is valid for full-surface mounting on workpieces which cover D inside to D outside (see table Dimensions), for workpieces with a smaller mounting surface an approximate maximum workpiece weight of 3.5 kg per cm² clamping surface can be calculated. For serial workpieces, a documented test should confirm the safety factor 3.

These flange type units is made of stainless steel and fix the hub positively against their extended flange preventing axial movement during tightening. Applied wherever self-centering action and good concentricity of mounted components are essential and hubs with straight-thru bores are used. Available sizes: Metric series shafts from 20 mm to 150 mm dia. and Inch series for shafts from 1” to 4” diameter. Excellent concentricity and very easy to dismantle – these Locking Assemblies provide particularly good concentricity between the clamped parts. The flange is reinforced at the critical point, preventing bending or lifting of the inner ring during assembly and thereby ensuring easy dismantling. High rotation speed – the dimensional accuracy of the RfN 7013 Locking Assemblies allows their use in applications with higher rotational speeds. High radial loads – the material strength of the RfN 7013 Locking Assemblies makes them especially suitable for applications with high radial...

These flange type units fix the hub positively against their extended flange preventing axial movement during tightening. Applied wherever self-centering action and good concentricity of mounted components are essential and hubs with straight-thru bores are used. Available sizes: Metric series shafts from 20 mm to 150 mm dia. and Inch series for shafts from 1” to 4” diameter. Excellent concentricity and very easy to dismantle – these Locking Assemblies provide particularly good concentricity between the clamped parts. The flange is reinforced at the critical point, preventing bending or lifting of the inner ring during assembly and thereby ensuring easy dismantling. High rotation speed – the dimensional accuracy of the RfN 7013 Locking Assemblies allows their use in applications with higher rotational speeds. High radial loads – the material strength of the RfN 7013 Locking Assemblies makes them especially suitable for applications with high radial loads. Axial hub positioning –...

These Locking Assemblies are of single-taper design with a self-locking taper providing good self-centering action and concentricity, as well as increased torque capacity. A pre-centering hub section is not required. Integral push-off screws for disassembly are provided. This unit can be placed deep inside a bore due to it’s design. Available sizes: Metric series shafts from 20 mm to 150 mm dia. and Inch series for shafts from 1” to 4” diameter. Excellent concentricity and very easy to dismantle – these Locking Assemblies provide particularly good concentricity between the clamped parts. The flange is reinforced at the critical point. This prevents a bending and lifting of the inner ring during installation and therefore a good dismantling is ensured. Higher Rotation Speed – the Locking Assemblies remain true-to-form during assembly and so they are suitable in applications with higher rotational speeds. High radial loads – the material strength of the RfN 7013 Locking Assemblies...

The model K 26 is a robust stud welding gun, especially for studs ø 22 – 25 mm Ideal for welding shear connectors SD 25 mm Ideal for through-deck-welding td Most suitable for long shear studs Adjustable hydraulic plunge damper Standard support with 3 legs Body: fibre-glass reinforced polyamide Lifting ring system with length compensation up to 8mm Control cable plug (4 wire) Optimal Integrated shielding gas device

Swivel stools: 5-arm plastic base, black, or 5-arm polished aluminium base, friction braked double castors for smooth floors or for carpeting, height adjustment 500 mm to 690 mm by means of “anatomic-lift” gas spring, with hand ring release, chromium-plated column, seat upholstered with leatherette acc. to colour chart. Examination seats: specially designed upholstered seat with leatherette cover acc. to colour chart, with or without backrest, height adjustment from 490 to 690 mm by means of gas spring, with foot ring release. 5-arm base powder coated in grey aluminium RAL 9007, with antistatic plastic castors Ø 50 mm for smooth/hard floors or for carpeting, with perimetral black bumper protection Safe working load: 135 kg.

Description Special purpose NC rotary table discontinuous serration ring design, non-lift type, Z=360 - worm gear i=180 - safe transport load: 2,500 kg - table plate dm 1,175mm, with through hole Ø 860 mm in the centre, with Ø 960H7 centering collar - horizontal use - max. table plate speed: 25 rpm(at n motor=4,500 rpm) and i=180 - safe axial load: 54,000 N - safe radial load: 54,000 N feature: - serration ring table, - monitoring of the following functions: Hirth serration system "unlocked" and Hirth serration system "locked"

The grommets are a type of strut that has many varieties such as round, oval, hexagonal, octagonal, and usually attached to bushings, pistons, shafts, and cylinders, which act as baffles. Sections with different shapes and features are produced with the latest CNC technology in sizes starting from 0.20 mm to 10.00 mm in diameter.

Material: HDPE Shell Dimension: 720 x 440mm Weight: 2.5/4.3kgs

Material: HDPE Shell Weight: 1.5kgs