Results for
AKROMAK METAL DIŞ TIC. LTD. ŞTI.
Turkey
Steel rope lever, powder coated, machined, material: stell casting GS42CrMo4+QT, quenced and tempered
Request for a quoteAKROMAK METAL DIŞ TIC. LTD. ŞTI.
Turkey
Metering roller lever, cnc-machined with fit tolerances, material: stell casting GS-52.3
Request for a quoteNORELEM FRANCE
France
Enter the desired lever colour here. The standard colours are: Black grey clamping lever, traffic red push button. Orange clamping lever, black grey push button. Traffic red clamping lever, black grey push button. Where L ≥ 60 mm the thread length is 60 mm. On request: Other threads, screw lengths and special versions. Dimension “H1” available in other lengths at extra charge. Drawing reference: 1) flat point DIN 78
Request for a quoteNORELEM FRANCE
France
Handle powder-coated, fine-textured structure. Steel parts black oxidised. Note: Standard colours are: black or ruby red RAL 3003.
Request for a quoteNORELEM FRANCE
France
Other threads, screw lengths and special versions. Dimensions “H1” and “A” available in other lengths at extra charge.
Request for a quoteNORELEM FRANCE
France
Tension levers can be used for simple clamping or control operations. Where applicable, there must be enough space available so that the grip can be rotated 360°. On request: Other internal threads, reamed holes and special versions. Dimension “A” available in other lengths at extra charge.
Request for a quoteNORELEM FRANCE
France
Suitable hinge pin see 04250. The cam lever is an eccentric lever that moves along a logarithmic spiral. Its clamping properties are even over the entire contact surface of the cam.
Request for a quoteNORELEM FRANCE
France
Handles cast aluminum EN AC-46200. Thrust washer plastic PA 66 GF 35-X fibreglass reinforced. Hinge pin stainless steel 1.4305. Studs and washer steel grade 5.8 or stainless steel 1.4305. Version: Handles fine structured powder-coated, black or red RAL 3003. Thrust washer black. Hinge pin bright. Studs and washer blue passivated steel or bright stainless steel. Note: Plastics are subject to creeping under load (retardation).
Request for a quoteNORELEM FRANCE
France
Indexing plungers are used where it is necessary to prevent changes of position due to lateral forces. A new locking position can be set only after the plunger has been manually disengaged. With this indexing plunger a cam lever is used to retract the pin. The indexing plunger remains unlocked as long as the handle is positioned over the dead-centre of the cam. The ergonomic cam lever enables light handling with low effort. Temperature range: Permanent operating temperature acc. to IEC 216 max. 160°C. Short-term operating temperature max. 250°C. Advantages: Simple and quick operation. Suitable for high temperature applications. With integrated detent function. On request: Special versions. Accessory: Spacer rings 03089 Positioning bushes for indexing plunger 03099-50 Mounting brackets 03099
Request for a quoteHONSEL-GROUP
Germany
In the processing of blind rivets, the lever tool BZ 70 covers the range from 3.0 up to 6.0 mm (aluminum). The main focus of this type of tool is on an especially durable and robust construction for daily use in workshops or on construction sites. Supplied in an impact-resistant plastic case. The replacement nosepieces are stored in a locked box integrated in the mandrel container.
Request for a quoteHONSEL-GROUP
Germany
In the processing of blind rivets, the lever tool BZ 72 covers the range from 4.0 up to 8.0 mm (aluminum). The main focus of this type of tool is on an especially durable and robust construction for daily use in workshops or on construction sites. Supplied in an impact-resistant plastic case. The replacement nosepieces are stored in a locked box integrated in the mandrel container.
Request for a quoteSFS GROUP GERMANY GMBH
Germany
Working range Blind rivets up to 7.7 mm Ø all materials Technical data Weight: 1.85 kg Total length: 570 mm Stroke: 10 mm Accessories Nosepieces: 16/26 BT, 16/32 BT, 16/42 BT and 16/48 BT Spent mandrel container Maintenance instructions with spare parts list Jaws (3 parts): HN 2 BT
Request for a quoteSFS GROUP GERMANY GMBH
Germany
Working range Blind rivets from 3.0 to 6.4 mm Ø all materials, except PolyGrip® blind rivets with 6.4 mm Ø made of stainless steel and G-Bulb® blind rivets Technical data Weight: 1.85 kg Total length: 570 mm Stroke: 10 mm Accessories Nosepieces: 16/29, 16/32, 16/36, 16/40 and 16/45 Spent mandrel container Maintenance instructions with spare parts list Jaws (3 parts)
Request for a quoteHONSEL-GROUP
Germany
Durable, robust, and reliable: the hand tool VNG 371 for the processing of blind rivet nuts (M5 to M10) and blind rivet bolts (M5 to M8). The VNG 371 is supplied in an impact-resistant plastic case and equipped with a comfortable drill rod for the easy lowering of the set connector and a quick-change system for the mandrels.
Request for a quoteRONIX GMBH
Germany
Lever hoists, also known as ratchet lever hoists, are mechanical devices used for lifting and pulling heavy loads in a wide range of industries. They commonly consist of a lever, a chain or wire rope, and a ratchet and pawl mechanism. Lever hoists work by applying force to the lever, which rotates the gears and tightens the chain or rope around the load. The ratchet and pawl system locks the load in place, preventing it from descending unintentionally. This working mechanism helps lever hoists offer a compact and portable solution for lifting and pulling operations in various industries, such as construction, maintenance, and transportation. Armed with an all-metal and impact-resistant body, Ronix RH-4110 is the 1.5T variant of our lineup of lever hoists with a proof load of 22.5kN
Request for a quoteRONIX GMBH
Germany
Professionals who benefit from using lever hoists include construction workers, riggers, maintenance technicians, and contractors. Specifically, lever hoists can be utilized for hoisting loads onto the scaffolding, positioning heavy equipment, pulling vehicles out of difficult situations, and securing loads during transportation. They offer a portable and versatile solution for lifting and pulling heavy loads, providing a high mechanical advantage and precise control over the operation. Ronix RH-4111 is designed in such a way to not only excel in all of the aforementioned scenarios but offer numerous safety and quality-of-life benefits as well. Keep scrolling to learn more about its main features and capabilities.
Request for a quoteRONIX GMBH
Germany
Lever hoists are particularly useful in scenarios where manual lifting or pulling is impractical or physically challenging. They are commonly used for lifting and positioning heavy machinery during installation or repair, pulling and tensioning heavy objects or structures, hoisting loads in confined spaces where space is limited, and securing loads onto trucks or trailers for transportation. Lever hoists offer exceptional lifting and pulling capabilities, precise control, and enhanced safety features, making them reliable tools for handling heavy loads in various industries. Ronix RH-4108 is no exception to any of these benefits and can come in handy in a wide range of use cases and scenarios. If you are in search of a new lever hoist, the RH-4108 model is one of the best options on the tools market. Keep reading to learn more about its main features and capabilities
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For short, straight and figure cuts, small radii • Special cutting geometry and precision cutting for a clean cut without any burrs • Cutting edge hardness 60-62 HRC • Micro-serrated cutting edge prevents slipping off during cutting • Re-adjustable screw-joint • With optimum leverage for easy and effortless work • With opening spring and catch • Handles made of solid rolled steel • Ergonomically multi-component safety handle for better handling • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For short, straight and figure cuts, large radii • Special cutting geometry and precision cutting for a clean cut without any burrs • Cutting edge hardness 60-62 HRC • Micro-serrated cutting edge prevents slipping off during cutting • Re-adjustable screw-joint • With optimum leverage for easy and effortless work • With opening spring and catch • Handles made of solid rolled steel • Ergonomically multi-component safety handle for better handling • Made of tool steel, forged, oil-hardened
Request for a quoteRIEGLER & CO.KG
Germany
Quick-connect couplings consist of two components – coupling socket and plug. They are the ideal interface to connect or disconnect the flow of gaseous or liquid media in lines safely and quickly. Quick-connect couplings are used for the conveyance of air, water, oil, acids or various gases. Here you will find single-sided and double-sided blocking quick connect couplings up to I.D. 19, asymmetrical couplings in different sizes and hydraulic couplings standardised to ISO. Our safety couplings are available in swivel, rotating and push button design and in combination with sliding valve and quick connect coupling. RIEGLER couplings are available with a flow of up to 8700 l/min and in EURO, ARO210 and ISO 6150 C plug profiles. The range of materials goes from bright and nickel-plated brass to different variants of stainless steel up to aluminium, plastic, steel and zinc die casting.
Request for a quoteWEBER FOOD TECHNOLOGY GMBH
Germany
Well-rounded: The ASP 460 derinder was designed specifically to process round cuts such as ham, shoulder and haunch. Advantages Clean removal of the rind without remnants Perfect speed regulation in combination with the Weber tension roller Variable adjustment of the rind or cutting thickness Moveable with swivel and fixed castors Space-saving With integrated bucket support and low space requirement User friendly Foot lever as standard Options: Foot switch or body operated lever Special tables Special rollers Special voltage
Request for a quoteNORELEM FRANCE
France
Handle electropolished or blasted. Thrust washer, hinge pin and screw bright. Note: The thrust washer face is lightly greased before delivery. The grease is FDA conform and is suitable for use in the foodstuff and pharmaceutical industries.
Request for a quoteResults for
Levers - Import exportNumber of results
248 ProductsCountries
Category