Levers - Import export

Enter the desired lever colour here. The standard colours are: Black grey clamping lever, traffic red push button. Orange clamping lever, black grey push button. Traffic red clamping lever, black grey push button. Where L ≥ 60 mm the thread length is 60 mm. On request: Other threads, screw lengths and special versions. Dimension “H1” available in other lengths at extra charge. Drawing reference: 1) flat point DIN 78

Handle powder-coated, fine-textured structure. Steel parts black oxidised. Note: Standard colours are: black or ruby red RAL 3003.

Other threads, screw lengths and special versions. Dimensions “H1” and “A” available in other lengths at extra charge.

Tension levers can be used for simple clamping or control operations. Where applicable, there must be enough space available so that the grip can be rotated 360°. On request: Other internal threads, reamed holes and special versions. Dimension “A” available in other lengths at extra charge.

Suitable hinge pin see 04250. The cam lever is an eccentric lever that moves along a logarithmic spiral. Its clamping properties are even over the entire contact surface of the cam.

Handles cast aluminum EN AC-46200. Thrust washer plastic PA 66 GF 35-X fibreglass reinforced. Hinge pin stainless steel 1.4305. Studs and washer steel grade 5.8 or stainless steel 1.4305. Version: Handles fine structured powder-coated, black or red RAL 3003. Thrust washer black. Hinge pin bright. Studs and washer blue passivated steel or bright stainless steel. Note: Plastics are subject to creeping under load (retardation).

Indexing plungers are used where it is necessary to prevent changes of position due to lateral forces. A new locking position can be set only after the plunger has been manually disengaged. With this indexing plunger a cam lever is used to retract the pin. The indexing plunger remains unlocked as long as the handle is positioned over the dead-centre of the cam. The ergonomic cam lever enables light handling with low effort. Temperature range: Permanent operating temperature acc. to IEC 216 max. 160°C. Short-term operating temperature max. 250°C. Advantages: Simple and quick operation. Suitable for high temperature applications. With integrated detent function. On request: Special versions. Accessory: Spacer rings 03089 Positioning bushes for indexing plunger 03099-50 Mounting brackets 03099

Working range Blind rivets up to 7.7 mm Ø all materials Technical data Weight: 1.85 kg Total length: 570 mm Stroke: 10 mm Accessories Nosepieces: 16/26 BT, 16/32 BT, 16/42 BT and 16/48 BT Spent mandrel container Maintenance instructions with spare parts list Jaws (3 parts): HN 2 BT

Working range Blind rivets from 3.0 to 6.4 mm Ø all materials, except PolyGrip® blind rivets with 6.4 mm Ø made of stainless steel and G-Bulb® blind rivets Technical data Weight: 1.85 kg Total length: 570 mm Stroke: 10 mm Accessories Nosepieces: 16/29, 16/32, 16/36, 16/40 and 16/45 Spent mandrel container Maintenance instructions with spare parts list Jaws (3 parts)

• For short, straight and figure cuts, small radii • Special cutting geometry and precision cutting for a clean cut without any burrs • Cutting edge hardness 60-62 HRC • Micro-serrated cutting edge prevents slipping off during cutting • Re-adjustable screw-joint • With optimum leverage for easy and effortless work • With opening spring and catch • Handles made of solid rolled steel • Ergonomically multi-component safety handle for better handling • Made of tool steel, forged, oil-hardened

• For short, straight and figure cuts, large radii • Special cutting geometry and precision cutting for a clean cut without any burrs • Cutting edge hardness 60-62 HRC • Micro-serrated cutting edge prevents slipping off during cutting • Re-adjustable screw-joint • With optimum leverage for easy and effortless work • With opening spring and catch • Handles made of solid rolled steel • Ergonomically multi-component safety handle for better handling • Made of tool steel, forged, oil-hardened

Clamping levers with safety function prevent changes in the locking point through accidental opening or closing. In the default position, the lever can be freely rotated and has no connection to the clamping point. The grip lever only engages when pushed down and the clamp can the loosened or tightened. A spring sets the lever automatically into the default position when released.

By using clamping levers with integrated clamping force intensifier, the clamping force can be increased by up to 75% compared to standard clamping levers. Furthermore, this product can also be used by persons with limited hand strength (e.g. in rehabilitation) to achieve comparable clamping forces with less effort. Less effort is also needed to loosen the clamping lever. The increase in clamping force is achieved by the integral needle roller thrust bearing, which generates very low surface friction on a rigid contact surface during clamping. The hardened thrust washers are designed for high clamping forces and the bearing with its high load rating guarantees a long service life. The clamped component is permanently protected by the large, stationary contact surface. A washer is no longer required. Due to the modular construction many special designs are available.

Handle electropolished or blasted. Thrust washer, hinge pin and screw bright. Note: The thrust washer face is lightly greased before delivery. The grease is FDA conform and is suitable for use in the foodstuff and pharmaceutical industries.

In contrast to DVK-6 quick closure pipe couplings, DVK-6 Fix pipe couplings only the upper area of the slit coupling is closed with a clamping lever. The clamping lever can be locked in any desired position by a simple upward pull. A high clamping force develops due to optimal length of lever. double secured massive aluminium clamps very easy to mount due to circular version white EPDM gasket (temperature-resistant from -30°C to +120°C), food-safe black natural rubber gasket (-20°C to +60°C)

The hydraulic davits are made of a sturdy steel frame, nylon wheels for easy handling, telescopic arm with swiveling hook, hydraulic pump with hand lever actuation. FP SA 1000 hydraulic davit Robust construction in painted steel Front supports suitable for deposit and withdrawal from Europallet Hydraulic pump with hand lever Telescopic arm 4 position then more capacity than a regular crane 3 position Nylon wheels with high smoothness Lifting piston chromed Safety valve to prevent overloading Strong hook with 360 ° rotation Test with overload of 125% Confirmations to CE

The hydraulic davits are made of a sturdy steel frame, nylon wheels for easy handling, telescopic arm with swiveling hook, hydraulic pump with hand lever actuation. FOLDABLE CRANE-SCFP 1000A Painted steel structure Front supports folding for easy transport and storage Telescopic arm with 3 positions Hydraulic pump with lever Nylon wheels with high smoothness Lifting piston chromed Safety valve to prevent overloading Strong hook with 360 ° rotation Test with overload of 125% CE compliance

Rolling and friction bearing lubrication, even at high temperatures Lubrication for bearings with contact to cleaning agents or disinfectants For mechanical units such as levers, joints and hinges, also under strong water effect Advantages and benefits NSF H1 registered High shear stability prevents thinning out of the grease under extreme mechanical loads such as during vibrations Excellent wear protection and very good high-pressure properties The calcium sulphonate complex soap ensures excellent water resistance and very good corrosion protection Broad temperature application range (-30°C to +160°C) High temperature and oxidation stability through fully synthetic base oil Very high resistance to water-alkaline or acidic disinfectants and cleaning agents Also available as spray version OKS 481 MOSH/MOAH-free

It is recommended that the cam lever is in a vertical position when the collet is positioned in the bore. The function of the clamping system was tested in bores with tolerance H7. All values for retaining force are guide values and are given without safety factor. The suitability for the respective application must be checked by the user. Advantages: Two components can be joined together without tools. The components are perfectly centred in the clamped state. The compact design means that the mandrel collet with cam lever can even be used in blind holes. There are no specific dimensional requirements for the holes. Additionally, the surfaces and design do not need to have any specific properties. Functional principle: The clamping system is inserted in the hole in the open state. At the beginning of the locking process, the mandrel collet expands and clamps itself in the lower component. The integrated disc spring assembly creates a positive down force

With wall plate | lockable closing plate | exchangeable pump | flexible dosage quantities | for all conventional 500 and 1.000 ml bottles Measurements in mm (W x H x D): 105 x 350 x 222 Universal Arm Lever Dispenser, ABS, silver, with drip tray Universal Arm Lever Dispenser, ABS, silver 1.000 ml bottle included in delivery · including adapter for 500 ml bottle

With wall plate | lockable closing plate | exchangeable pump | flexible dosage quantities | for all conventional 500 and 1.000 ml bottles Measurements in mm (W x H x D): 105 x 350 x 222 Universal Arm Lever Dispenser, ABS, white, with drip tray Universal Arm Lever Dispenser, ABS, white 1.000 ml bottle included in delivery · including adapter for 500 ml bottle

Mechanical Lever Crimping Tools

size 3, single acting max. clamping force: approx. 5.8 kN without position monitoring with clamping lever max. 250 bar, as per data sheet B1.829