Levers - Import export

Enter the desired lever colour here. The standard colours are: Black grey clamping lever, traffic red push button. Orange clamping lever, black grey push button. Traffic red clamping lever, black grey push button. Where L ≥ 60 mm the thread length is 60 mm. On request: Other threads, screw lengths and special versions. Dimension “H1” available in other lengths at extra charge. Drawing reference: 1) flat point DIN 78

Handle powder-coated, fine-textured structure. Steel parts black oxidised. Note: Standard colours are: black or ruby red RAL 3003.

Other threads, screw lengths and special versions. Dimensions “H1” and “A” available in other lengths at extra charge.

Tension levers can be used for simple clamping or control operations. Where applicable, there must be enough space available so that the grip can be rotated 360°. On request: Other internal threads, reamed holes and special versions. Dimension “A” available in other lengths at extra charge.

Suitable hinge pin see 04250. The cam lever is an eccentric lever that moves along a logarithmic spiral. Its clamping properties are even over the entire contact surface of the cam.

Handles cast aluminum EN AC-46200. Thrust washer plastic PA 66 GF 35-X fibreglass reinforced. Hinge pin stainless steel 1.4305. Studs and washer steel grade 5.8 or stainless steel 1.4305. Version: Handles fine structured powder-coated, black or red RAL 3003. Thrust washer black. Hinge pin bright. Studs and washer blue passivated steel or bright stainless steel. Note: Plastics are subject to creeping under load (retardation).

Indexing plungers are used where it is necessary to prevent changes of position due to lateral forces. A new locking position can be set only after the plunger has been manually disengaged. With this indexing plunger a cam lever is used to retract the pin. The indexing plunger remains unlocked as long as the handle is positioned over the dead-centre of the cam. The ergonomic cam lever enables light handling with low effort. Temperature range: Permanent operating temperature acc. to IEC 216 max. 160°C. Short-term operating temperature max. 250°C. Advantages: Simple and quick operation. Suitable for high temperature applications. With integrated detent function. On request: Special versions. Accessory: Spacer rings 03089 Positioning bushes for indexing plunger 03099-50 Mounting brackets 03099

Lever hoists, also known as ratchet lever hoists, are mechanical devices used for lifting and pulling heavy loads in a wide range of industries. They commonly consist of a lever, a chain or wire rope, and a ratchet and pawl mechanism. Lever hoists work by applying force to the lever, which rotates the gears and tightens the chain or rope around the load. The ratchet and pawl system locks the load in place, preventing it from descending unintentionally. This working mechanism helps lever hoists offer a compact and portable solution for lifting and pulling operations in various industries, such as construction, maintenance, and transportation. Armed with an all-metal and impact-resistant body, Ronix RH-4110 is the 1.5T variant of our lineup of lever hoists with a proof load of 22.5kN

Professionals who benefit from using lever hoists include construction workers, riggers, maintenance technicians, and contractors. Specifically, lever hoists can be utilized for hoisting loads onto the scaffolding, positioning heavy equipment, pulling vehicles out of difficult situations, and securing loads during transportation. They offer a portable and versatile solution for lifting and pulling heavy loads, providing a high mechanical advantage and precise control over the operation. Ronix RH-4111 is designed in such a way to not only excel in all of the aforementioned scenarios but offer numerous safety and quality-of-life benefits as well. Keep scrolling to learn more about its main features and capabilities.

Lever hoists are particularly useful in scenarios where manual lifting or pulling is impractical or physically challenging. They are commonly used for lifting and positioning heavy machinery during installation or repair, pulling and tensioning heavy objects or structures, hoisting loads in confined spaces where space is limited, and securing loads onto trucks or trailers for transportation. Lever hoists offer exceptional lifting and pulling capabilities, precise control, and enhanced safety features, making them reliable tools for handling heavy loads in various industries. Ronix RH-4108 is no exception to any of these benefits and can come in handy in a wide range of use cases and scenarios. If you are in search of a new lever hoist, the RH-4108 model is one of the best options on the tools market. Keep reading to learn more about its main features and capabilities

Quick-connect couplings consist of two components – coupling socket and plug. They are the ideal interface to connect or disconnect the flow of gaseous or liquid media in lines safely and quickly. Quick-connect couplings are used for the conveyance of air, water, oil, acids or various gases. Here you will find single-sided and double-sided blocking quick connect couplings up to I.D. 19, asymmetrical couplings in different sizes and hydraulic couplings standardised to ISO. Our safety couplings are available in swivel, rotating and push button design and in combination with sliding valve and quick connect coupling. RIEGLER couplings are available with a flow of up to 8700 l/min and in EURO, ARO210 and ISO 6150 C plug profiles. The range of materials goes from bright and nickel-plated brass to different variants of stainless steel up to aluminium, plastic, steel and zinc die casting.

Clamping levers with safety function prevent changes in the locking point through accidental opening or closing. In the default position, the lever can be freely rotated and has no connection to the clamping point. The grip lever only engages when pushed down and the clamp can the loosened or tightened. A spring sets the lever automatically into the default position when released.

By using clamping levers with integrated clamping force intensifier, the clamping force can be increased by up to 75% compared to standard clamping levers. Furthermore, this product can also be used by persons with limited hand strength (e.g. in rehabilitation) to achieve comparable clamping forces with less effort. Less effort is also needed to loosen the clamping lever. The increase in clamping force is achieved by the integral needle roller thrust bearing, which generates very low surface friction on a rigid contact surface during clamping. The hardened thrust washers are designed for high clamping forces and the bearing with its high load rating guarantees a long service life. The clamped component is permanently protected by the large, stationary contact surface. A washer is no longer required. Due to the modular construction many special designs are available.

Handle electropolished or blasted. Thrust washer, hinge pin and screw bright. Note: The thrust washer face is lightly greased before delivery. The grease is FDA conform and is suitable for use in the foodstuff and pharmaceutical industries.

arm plug nipple Category Compressed-air technology / Fittings for air hoses / Plug nipples for levers Product number supplier 301107

It is recommended that the cam lever is in a vertical position when the collet is positioned in the bore. The function of the clamping system was tested in bores with tolerance H7. All values for retaining force are guide values and are given without safety factor. The suitability for the respective application must be checked by the user. Advantages: Two components can be joined together without tools. The components are perfectly centred in the clamped state. The compact design means that the mandrel collet with cam lever can even be used in blind holes. There are no specific dimensional requirements for the holes. Additionally, the surfaces and design do not need to have any specific properties. Functional principle: The clamping system is inserted in the hole in the open state. At the beginning of the locking process, the mandrel collet expands and clamps itself in the lower component. The integrated disc spring assembly creates a positive down force

Category Low pressure hoses and fittings / Industrial couplings / Tank truck-couplings / Tension ring lever / Stainless steel Product number supplier 330500055v

Category Low pressure hoses and fittings / Industrial couplings / Tank truck-couplings / Tension ring lever / Brass Product number supplier 330500055

Grip black or traffic red RAL3020. Thrust washer black. Hinge pin bright. Stud and washer trivalent blue passivated or bright stainless steel. Note: Adjustable cam levers are used if the position of the lever relative to the axis of tension only permits one specific position (interference circle). The exact position of the lever is adjusted using a screwdriver on the fine thread setscrew. Plastics are subject to creeping under load (retardation), this can cause reduced clamping force. Drawing reference: 1) setscrew for fine adjustment of lever

Solid stainless steel Modern, angular design Suitable to Griffwerk-locks

Solid stainless steel Modern design through contrasting surfaces Suitable to Griffwerk-locks

Solid stainless steel Modern design through contrasting surfaces Suitable to Griffwerk-locks

Solid stainless steel Current office design Suitable to Griffwerk-locks

Solid stainless steel Modern design through contrasting surfaces Suitable to Griffwerk-locks

Square lock case in modern design For 24 mm fold depth Suitable for 8-10 mm glass

Square lock case in modern design For 24 mm fold depth Suitable for 8-10 mm glass

Square lock case in modern design For 24 mm fold depth Suitable for 8-10 mm glass