Laboratory services - Import export

Water analysis Drinking water investigation (TVO, Kalkaggressivität DIN 50930) microbiological examinations accredited sampling and analytics Basic and raw water investigations with identification of the ion balance limnological and marine sampling and testing Leachate investigations in the landfill area Operational monitoring of sewage treatment plants Operation monitoring of waterworks sewage sludge analyzes Investigation of concrete aggressiveness according to DIN 4030 Waste and recycling Examination of pollutants and expert support of dismantling of buildings and technical installations Site coordination by experts for safety and health protection when working in the contaminated area according to DGUV Rule 101-004 (formerly BGR 128) Health and safety plans for work in the contaminated area Emission monitoring of landfill sites (groundwater monitoring, leachate investigations, gas emission measurements, soil monitoring.

The precision RTD simulator is used where measuring instruments or controlling means with high precision must be examined or calibrated. The simulator is suitable for calibration laboratory and service centers which need a computer-controlled resistance decade for the automation of calibration procedures. All standard platinum and nickel RTD can be simulated with very high accuracy according to scales ITS 90 or IPTS 68. Temperature regulators, transducers etc. often supply a pulsed signal current in order to reduce the self-heating of the RTD. Devices with electronic simulation of RTD are therefore inclined to swinging and do not function with this application. Features: — Simulation of Pt100, Pt200, Pt500, Pt1000, Ni100 and Ni1000 sensors — Accuracy 0.02 °C — Temperature scales ITS 90, IPTS 68 — Real Ohm simulation — Control manually or remotely via RS232/IEEE488/USB Converter

The RESISTOMAT® model 2320 is a universally applicable and easy to operate measurement device for low-ohmic resistances. The light and handy device in a stable IP54 plastic housing with membrane keypad is likewise suitable for use in service, laboratory or on the production floor. The power supply is done via built-in rechargeable battery packs or by standard batteries. If need be, the temperature of samples can be measured and the sample resistance is subsequently compensated to fit the value at 20°C. This applies for samples with resistances depending on the sample’s temperature. The temperature coefficients for copper and aluminium are included as standard. A third and fourth coefficient may be set individually for any given material to be measured. Features: — Measuring ranges from 40 mΩ to 4 kΩ — Resolution up to 10 μΩ — Measuring accuracy 0.05 % Rdg. — Autorange — Temperature compensation — Bipolar measurement — Input voltage protection up to 415 Vrms

We can provide you with the chemical and microbiological analysis of your product. Additionally, we also advise and support you to comply with applicable national legislation. ANALYTICAL SERVICES We offer complete traceability and quality assurance of all the products we offer. We achieve this by providing top-quality analytical services. These include testing all critical parameters that are continuously analyzed in our in-house and third-party international laboratories. See also Quality Assurance – Accredited laboratory services for more information. REGULATORY SUPPORT We offer a full customer support in terms of regulatory compliance for all our products and customers.

Disposable nitrile gloves. Class I medical aid, falls into the category: personal protective equipment. SuperGuard Nitrile disposable non-powdered non-sterile examination gloves for daily use. Registered as a medical device. Non-sterile, non-powdered Suitable for single use Universal, ambidextrous Textured on the fingertips Made of nitrile and vinyl, latex free For use in healthcare, food industry, laboratories, industry, social services, also suitable for cleaning They are suitable for people with sensitive skin and allergy sufferers They are universal, suitable for healthcare or food contact.

Disposable nitrile gloves. Class I medical aid, falls into the category: personal protective equipment. SETINO Nitrile disposable non-powdered non-sterile examination gloves for daily use. Registered as a medical device. Non-sterile, non-powdered Suitable for single use Universal, ambidextrous Textured on the fingertips Made of nitrile and vinyl, latex free For use in healthcare, food industry, laboratories, industry, social services, also suitable for cleaning They are suitable for people with sensitive skin and allergy sufferers They are universal, suitable for healthcare or food contact.

Disposable nitrile gloves. Class I medical aid, falls into the category: personal protective equipment. INTCO® Synguard Nitrile disposable non-powdered non-sterile examination gloves for daily use. Registered as a medical device. Non-sterile, non-powdered Suitable for single use Universal, ambidextrous Textured on the fingertips Made of nitrile, latex free For use in healthcare, food industry, laboratories, industry, social services, also suitable for cleaning They are suitable for people with sensitive skin and allergy sufferers The gloves have a textured finger surface for a perfect feel. They are universal, suitable for healthcare or food contact

We offer you the following services: - Regulatory Advice - REACH Registration - Preparation of Registration Dossiers - Read Across - IUCLID - Robust Study Summaries - Chemical Safety Report / CSR - Toxicological Expertise - Optimal Test Strategy Development - REACH Testing: Tests and Studies acc. GLP - REACH Study Monitoring - SVHC Screening - Risk Assessment - REACh Compliance Service / REACh Auditing Service - REACH Material Safety Data Sheets We would also be happy to be your REACH service provider, who reliably looks after your REACH projects, just as we already do for many other satisfied customers. For more information please contact INVITRO-CONNECT GmbH. Fast Project Execution: personal - competent - reliable --> contact@invitro-connect.com REACH Service - All REACH laboratory tests - Phys-Chem / Tox / in vitro tests / Genotox / Ecotox, etc. - More than 80 test laboratories - Study monitoring, Regulatory Service, IUCLID 6, CSR etc.

https://www.invitro-connect.com/en - Your International Experts for Laboratory Testing and Regulatory Services - More than 80 test laboratories in our network - Product safety - Regulatory service - in vitro tests - All OECD tests for pharmaceuticals, chemicals, medical devices and cosmetics - in-house toxicologistes - Project management - Study monitoring --> complete services - all from one hand !!! --> contact@invitro-connect.com We would like to manage also your projects. Best regards Pascal Piller and the whole team of INVITRO-CONNECT GmbH #biocides #toxicological #chemicals #laboratory #regulatory #affairs #reach #projectmanagement #pharma #medical #study #devices #Labor #GLP #cosmetics

INVITRO-CONNECT GmbH is your ideal partner and service provider for your projects in the field of life science for chemicals / REACH, pharmaceuticals, biocides, cosmetics and medical devices. We are the strong partner at your side who provides our tailor-made service modules according to your project requirements. You have the choice to individually select the modules that you urgently need in your projects from our modular service system. With our technical expertise and our customer-oriented approach, we fit in perfectly with your projects and processes, so that we form a team and nothing stands in the way of the project's success. The Modules can be individually and flexibly adapted for each project. For more information please contact INVITRO-CONNECT GmbH. INVITRO-CONNECT GmbH - Your International Experts for Laboratory Testing and Regulatory Services Fast Project Execution: personal - competent - reliable --> contact@invitro-connect.com

INVITRO-CONNECT GmbH: - Regulatory advice - All OECD laboratory tests - Phys-Chem / Tox / in vitro tests / Genotox / Ecotox, E-fate etc. - Personal project management - in-house toxicologists - Study monitoring - Study Summaries, IUCLID 6 - Dossier creation - MSDS etc. Benefit from an international, very well organized network: carefully selected experts, in-house toxicologists and more than 80 accredited test laboratories and service providers with over 20 years of experience in the industry. We are your competent partner for regulatory and toxicological issues, expert services, reports and all OECD laboratory tests We are also happy to be your reliable partner for your laboratory services and regulatory projects. Questions? -> contact@invitro-connect.com Your Mrs. Dr. Ute Hassmann and Your Mr. Pascal Piller

https://www.invitro-connect.com/en - Your International Experts for Laboratory Testing and Regulatory Services - More than 80 test laboratories in our network - Product safety - Regulatory service - in vitro tests - All OECD tests for pharmaceuticals, chemicals, medical devices and cosmetics - in-house toxicologistes - Preclinical Services - Project management - Study monitoring --> complete services - all from one hand !!! --> contact@invitro-connect.com We would like to manage also your projects. Best regards Dr. Ute Hassmann (Deputy Managing Director) and Pascal Piller (Managing Director) INVITRO-CONNECT GmbH #biocides #toxicological #chemicals #laboratory #regulatory #affairs #reach #projectmanagement #pharma #medical #study #devices #Labor #GLP #cosmetics

Medical Device Services / Medical Device Laboratory Testing INVITRO-CONNECT GmbH offers you: - General regulatory advice for medical devices - All regulatory examinations and tests under GLP - Project management and study monitoring - Medical Device Regulatory Service - Product testing for contained SVHC substances INVITRO-CONNECT offers you a complete service for the approval of medical devices according (EU) 2017/745 (Medical Device Regulation - MDR) / ISO 10993. From the development of an ideal test strategy to laboratory and project coordination, study monitoring, toxicological expertise and GLP inspections in the cooperation laboratories. We deliver the finalized test reports including the registration dossier - digitally and on paper, worldwide. Benefit from our diverse know-how, our experienced cooperation partners and an international, very well-organized network. Questions? -> contact@invitro-connect.com

Determination of skin sensitization potential is a critical endpoint in the safety assessment of raw materials, chemicals, mixtures and formulations. Although the Guinea Pig Maximization Test (GPMT) and Local Lymph node assay (LLNA) have historically been used to address this adverse effect, in vitro assays have been developed and validated in order to replace these resource-intensive animal tests. INVITRO-CONNECT GmbH offers various test strategies without animal testing for examining skin sensitization: - Direct Peptide Reactivity Activation Assay (DPRA, OECD 442C) - ARE-Nrf2 Luciferase Keratinocyte Activation Test Method (OECD 442D) -Human Cell Line Activation Test (h-CLAT, OECD 442E) -Kinetic Direct Peptide Reactivity Assay (kDPRA) -Myeloid U937 Skin Sensitization Test (MUSST / U-SENS) -and more Fast Project Execution: personal - competent - reliable --> contact@invitro-connect. - More than 80 Test Laboratories - Product Safety - Regulatory Service -

INVITRO-CONNECT GmbH offers various test strategies without animal testing for examining skin Corrosion: - OECD 435 - Skin Corrosion : "In Vitro Membrane Barrier Test Method for Skin Corrosion" (Corrositex): The Corrositex® assay is a standardized and quantitative in vitro test developed as a replacement for the dermal corrosivity rabbit test. The Corrositex® assay is presently the only in vitro assay approved by the U.S. Department of Transportation for testing potential corrosive materials and assigning packing group categories. For more information please contact INVITRO-CONNECT GmbH for assistance in developing specialized protocols for your test materials. INVITRO-CONNECT GmbH: Fast Project Execution: personal - competent - reliable --> contact@invitro-connect.com More than 80 test laboratories - Product safety - Regulatory service - In vitro tests - All OECD tests for pharmaceuticals, chemicals, medical devices and cosmetics - Study monitoring, MSDS etc.

SHOE COVER Laminated non-woven fabric gr. 54 Personal protective equipment Category III For medical and professional use The stocking cover with leg has two elasticated straps at the calf and knee secure the device to personal clothing. The seams are internal and are reinforced. Health environment personnel: physicians - surgeons - nurses - ambulance workers - cleaners - sanitation workers workplace: Hospital/clinic - doctor's office - RSA - scientific laboratory professional environment: professional operators in general - cleaners and sanitizers funeral services - chemical laboratories

Our quality department serves with an independent quality assurance unit and chemical, physical control, microbiology and production control laboratories that form the pillars of quality control. Quality assurance, quality control, licensing, R&D and laboratory service units in our quality directorate carry out all activities that will ensure that the consumer encounters a quality product both during and after production. In our quality unit; All studies within the scope of stability, starting materials and finished product analyzes, process and cleaning validations are carried out with a full GMP and BRC Food understanding. Necessary in-service trainings are given to all our employees by our expert personnel.

The portable, battery-operated KAL 84 calibration system combines a pressure transmitter and pressure gauge. These can be used to test and calibrate pressure sensors and other pressure gauges for low pressures both quickly and easily. A high degree of accuracy and excellent reproducibility of results combined with a robust design give the system all the functionalities required for laboratory and service applications. Calibration in mmHg (optional) makes the system ideal for applications in accordance with the regulations for users of medical products, e.g. blood pressure monitors and infusion/suction pumps.

Over time, various factors such as exposure to contaminants, age, incorrect operation, sensor deterioration, a drift in electronics or exposure to corrosive gases, can contribute to dewpoint instruments losing accuracy and reliability. To maintain accuracy and reliability, we advise an annual service and calibration. For instruments used in critical applications or aggressive environments, more frequent service and calibration intervals are recommended. Our Calibration Laboratory Engineers perform routine servicing, commissioning, fault finding, repairs and installation services in accordance with our accredited quality system. Our calibration range of -90 °C to +20 °C dewpoint is traceable to National and International Humidity Standards at the National Physical Laborarory (NPL). SHAW products are developed to be reliable, easy to install and simple to operate, We are committed to providing the highest quality products and services for accurate and reliable moisture measurement.

ISO/IEC 17025:2017 UKAS accredited calibrations are available across a large range of our traceability schedule for flowmeters, gas flow, air flow, fluid flow for both oil and water flowmeters, pressure, oxygen clean pressure, electrical, frequency, time, temperature simulation and supplemented with a host of standard traceable calibration services. UKAS accredited calibration services (Laboratory 0604) and thermal fluid component testing services to a wide scope of industries whilst maintaining a reputation for quality, cost effectiveness, impartiality and reliability. Our specialist UKAS accreditation offerings for aviation, automotive, medical, environmental and pharmaceutical sectors provide worldwide acceptance for many of the ASTM, EPA, ISO, BSI, DIN and SAE standardized test protocols.

Coverall used in Medical institution, outpatient service, ward & laboratory for general protection. Elasticated hood and self-adhesive chin flap Elasticated cufs and ankles. Ergonomically designed for unrestricted movement, comfort and breathability. Zipper with self-adhesive double zip flap More liquid protection. Particle protection down to the micron. 10 years shelf life. Heat - Sealed stripe options. Antistatic treatment, silicon non-added. Quality control for exceptionally high standards.

Coverall used in Medical institution, outpatient service, ward & laboratory for general protection. Elasticated hood and self-adhesive chin flap. Elasticated cuffs and ankles. Ergonomically designed for unrestricted movement, comfort and breathability. Zipper with self-adhesive double zip flap. More liquid protection. Particle protection down to the micron. 10 years shelf life. Antistatic treatment, silicon non-added. Quality control for exceptionally high standards. Coverall Sizes Small, Medium, Large, Extra-Large or as your request. Directives and Regulations (EU) 2016/425 Personal Protective Equipment 2001/95/EC (GPSD) Product Safety Directive

The SSA-20 is a handheld CO2 analyser designed by Samson Scientific to measure, verify and validate the CO2 levels on CO2 Incubators. The SSA-20 is a vital CO2 analysis tool for field service engineers, laboratory technicians and on-site engineers who are looking for a fast, easy to use and accurate CO2 Analyser. Furthermore, the SSA-20 has the backup of our excellent after sales support and calibration package.

The SSA-20+ is a handheld CO2/O2 analyser designed by Samson Scientific to measure, verify and validate the CO2 and O2 levels on CO2 Incubators. The SSA-20+ is a vital CO2 & O2 analysis tool for field service engineers, laboratory technicians and on-site engineers who are looking for a fast, easy to use and accurate CO2/O2 Analyser. As with its partner the SSA-20, the SSA-20+ has the backup of our excellent after sales support and calibration package.

ECE R10 is a regulation published by The United Nations Economic Commission for Europe (UNECE) for automotive industry. ECE R10 is defining Electromagnetic Compatibility requirements of the vehicles and electronic sub assemblies (ESAs) used in automotive. Do you need ECE R10 testing or ECE R10 Type Approval, Homologation or E-marking? We are offering ECE R10 testing and type approval (E marking) services with our international network of accredited laboratories and designated technical services. Contact Testups, one of our expert engineers will contact you and send a quote specific to your requirements.

Gaskets are necessary to guarantee watertightness of the tunnel and avoid water infiltration in the bridge segments. Almost 20 million metres of gaskets supplied for railway, underground, road and hydraulic tunnels prove FIP INDUSTRIALE technical skills and production capacities. FIP INDUSTRIALE gaskets are made of EPDM, CR-SBR, NBR and HYDROEXPANSIVE RUBBER. FIP INDUSTRIALE manufactures both compact gaskets with hardness from 50 to 80 Shore A, and foam gaskets with various densities. The gaskets can be supplied in continuous extrusion or in frames with 4 or 6 corners moulded to the profile. EPDM water-tight gasket. Durability and unchangeability over time of FIP INDUSTRIALE gaskets are guaranteed by the special rubber compounds used and by severe laboratory testing simulating actual service conditions. The dimensions of the gasket, the profile, the type of rubber and its physical and mechanical characteristics can be specified at the design stage based on the service conditions: