Laboratory services - Import export

The precision RTD simulator is used where measuring instruments or controlling means with high precision must be examined or calibrated. The simulator is suitable for calibration laboratory and service centers which need a computer-controlled resistance decade for the automation of calibration procedures. All standard platinum and nickel RTD can be simulated with very high accuracy according to scales ITS 90 or IPTS 68. Temperature regulators, transducers etc. often supply a pulsed signal current in order to reduce the self-heating of the RTD. Devices with electronic simulation of RTD are therefore inclined to swinging and do not function with this application. Features: — Simulation of Pt100, Pt200, Pt500, Pt1000, Ni100 and Ni1000 sensors — Accuracy 0.02 °C — Temperature scales ITS 90, IPTS 68 — Real Ohm simulation — Control manually or remotely via RS232/IEEE488/USB Converter

The RESISTOMAT® model 2320 is a universally applicable and easy to operate measurement device for low-ohmic resistances. The light and handy device in a stable IP54 plastic housing with membrane keypad is likewise suitable for use in service, laboratory or on the production floor. The power supply is done via built-in rechargeable battery packs or by standard batteries. If need be, the temperature of samples can be measured and the sample resistance is subsequently compensated to fit the value at 20°C. This applies for samples with resistances depending on the sample’s temperature. The temperature coefficients for copper and aluminium are included as standard. A third and fourth coefficient may be set individually for any given material to be measured. Features: — Measuring ranges from 40 mΩ to 4 kΩ — Resolution up to 10 μΩ — Measuring accuracy 0.05 % Rdg. — Autorange — Temperature compensation — Bipolar measurement — Input voltage protection up to 415 Vrms

We can provide you with the chemical and microbiological analysis of your product. Additionally, we also advise and support you to comply with applicable national legislation. ANALYTICAL SERVICES We offer complete traceability and quality assurance of all the products we offer. We achieve this by providing top-quality analytical services. These include testing all critical parameters that are continuously analyzed in our in-house and third-party international laboratories. See also Quality Assurance – Accredited laboratory services for more information. REGULATORY SUPPORT We offer a full customer support in terms of regulatory compliance for all our products and customers.

Disposable nitrile gloves. Class I medical aid, falls into the category: personal protective equipment. SuperGuard Nitrile disposable non-powdered non-sterile examination gloves for daily use. Registered as a medical device. Non-sterile, non-powdered Suitable for single use Universal, ambidextrous Textured on the fingertips Made of nitrile and vinyl, latex free For use in healthcare, food industry, laboratories, industry, social services, also suitable for cleaning They are suitable for people with sensitive skin and allergy sufferers They are universal, suitable for healthcare or food contact.

Disposable nitrile gloves. Class I medical aid, falls into the category: personal protective equipment. SETINO Nitrile disposable non-powdered non-sterile examination gloves for daily use. Registered as a medical device. Non-sterile, non-powdered Suitable for single use Universal, ambidextrous Textured on the fingertips Made of nitrile and vinyl, latex free For use in healthcare, food industry, laboratories, industry, social services, also suitable for cleaning They are suitable for people with sensitive skin and allergy sufferers They are universal, suitable for healthcare or food contact.

SHOE COVER Laminated non-woven fabric gr. 54 Personal protective equipment Category III For medical and professional use The stocking cover with leg has two elasticated straps at the calf and knee secure the device to personal clothing. The seams are internal and are reinforced. Health environment personnel: physicians - surgeons - nurses - ambulance workers - cleaners - sanitation workers workplace: Hospital/clinic - doctor's office - RSA - scientific laboratory professional environment: professional operators in general - cleaners and sanitizers funeral services - chemical laboratories

The portable, battery-operated KAL 84 calibration system combines a pressure transmitter and pressure gauge. These can be used to test and calibrate pressure sensors and other pressure gauges for low pressures both quickly and easily. A high degree of accuracy and excellent reproducibility of results combined with a robust design give the system all the functionalities required for laboratory and service applications. Calibration in mmHg (optional) makes the system ideal for applications in accordance with the regulations for users of medical products, e.g. blood pressure monitors and infusion/suction pumps.

Over time, various factors such as exposure to contaminants, age, incorrect operation, sensor deterioration, a drift in electronics or exposure to corrosive gases, can contribute to dewpoint instruments losing accuracy and reliability. To maintain accuracy and reliability, we advise an annual service and calibration. For instruments used in critical applications or aggressive environments, more frequent service and calibration intervals are recommended. Our Calibration Laboratory Engineers perform routine servicing, commissioning, fault finding, repairs and installation services in accordance with our accredited quality system. Our calibration range of -90 °C to +20 °C dewpoint is traceable to National and International Humidity Standards at the National Physical Laborarory (NPL). SHAW products are developed to be reliable, easy to install and simple to operate, We are committed to providing the highest quality products and services for accurate and reliable moisture measurement.

Coverall used in Medical institution, outpatient service, ward & laboratory for general protection. Elasticated hood and self-adhesive chin flap Elasticated cufs and ankles. Ergonomically designed for unrestricted movement, comfort and breathability. Zipper with self-adhesive double zip flap More liquid protection. Particle protection down to the micron. 10 years shelf life. Heat - Sealed stripe options. Antistatic treatment, silicon non-added. Quality control for exceptionally high standards.

Coverall used in Medical institution, outpatient service, ward & laboratory for general protection. Elasticated hood and self-adhesive chin flap. Elasticated cuffs and ankles. Ergonomically designed for unrestricted movement, comfort and breathability. Zipper with self-adhesive double zip flap. More liquid protection. Particle protection down to the micron. 10 years shelf life. Antistatic treatment, silicon non-added. Quality control for exceptionally high standards. Coverall Sizes Small, Medium, Large, Extra-Large or as your request. Directives and Regulations (EU) 2016/425 Personal Protective Equipment 2001/95/EC (GPSD) Product Safety Directive

The SSA-20 is a handheld CO2 analyser designed by Samson Scientific to measure, verify and validate the CO2 levels on CO2 Incubators. The SSA-20 is a vital CO2 analysis tool for field service engineers, laboratory technicians and on-site engineers who are looking for a fast, easy to use and accurate CO2 Analyser. Furthermore, the SSA-20 has the backup of our excellent after sales support and calibration package.

The SSA-20+ is a handheld CO2/O2 analyser designed by Samson Scientific to measure, verify and validate the CO2 and O2 levels on CO2 Incubators. The SSA-20+ is a vital CO2 & O2 analysis tool for field service engineers, laboratory technicians and on-site engineers who are looking for a fast, easy to use and accurate CO2/O2 Analyser. As with its partner the SSA-20, the SSA-20+ has the backup of our excellent after sales support and calibration package.