Results for
IDG-DICHTUNGSTECHNIK GMBH
Germany
The standard version is universally usable, but in special cases the light version can offer additional advantages.The light version is suitable for tight installation conditions and is also easier to fit in nonsplit grooves.This version reduces the friction. The low compression reserve with a negative effect on large tolerances must be considered.
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
The standard version is universally usable, but in special cases the light version can offer additional advantages. The light version is suitable for tight installation conditions and is also easier to fit in nonsplit grooves.This version reduces the friction. The low compression reserve with a negative effect on large tolerances must be considered.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Turned spindles, axles, shafts. Pistons for pneumatics, hydraulics, pumps. Ground, hardened, polished, chrome-plated.
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
Applications at high speed and low pressure. With O‑ring as secondary seal for sealing in the groove base. Hygienic design without undercuts. No sump formation in front of the seal. Reduced heat buildup due to special lip design. Pressureactivated seal energization. The integrated wedge prevents the sealing lip turning inside out. Very long seal life due to high abrasion resistance. Material only generates low frictional force. Sealing lip does not stick to the mating surface even after prolonged shutdown
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
With internally protected sealing lip. With O‑ring for sealing in the groove base. For high peripheral speed and increased chemical resistance
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
High pressures at relatively low speed. For fluids over a wide viscosity range and for gases. Rotary unions at high pressure. Robot axes
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
High termat or chemical specifications. Medium pressure and low speed. Suitable for almost all fluids. Robat axes, Rotary unions.
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
Types 231 to 238 are used for lubricating fluids and to a limited degree also for dry running and purely rotary or oscillating motion. They are only partly suitable for helical motion.
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
Motor shafts. Gear and frive unit shafts. Fan shafts. Clamping tools. Applications at high speed and lo pressure.
Request for a quoteKEIPER GMBH & CO. KG ANTRIEBS- U. TRANSPORTTECHNIK
Germany
BO-QA Clamping bushings Pulleys can be fastened to cylindrical shafts or journals safely, flexibly and, above all, economically with BOQA clamping bushings. Shaft-to-hub connections with BOQA fastening elements are: SAFE - non-positive, backlash-free and highly precise fastening of pulleys FAST - marked gain in time needed for assembly FLEXIBLE - wide range of applicability, high delivery standard ECONOMICAL - reduction in costs SPACE-SAVING - extremely compact, no overhang NON-CORROSIVE - made predominantly of stainless steel Shaft-to-hub connections with BOQA fastening elements are insensitive to extreme load alternations. They can be easily adjusted axially and radially, are easy to mount and dismount. Any additional forming of the shaft or other adjustment work will not be necessary.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The B80 HME series is a design with bearingless cantilever construction that is directly coupled to the IEC Motor. Specially designed for plant engineering and confined installation conditions. It can be operated in dry installation next to the tank, thus facilitating access for maintenance and repair work. The pump is suitable for pumping /circulating neutral, corrosive and mechanically contaminated liquids. However, it can also be used in stationary installation in the chemical industry and process engineering, in surface and electroplating technology and in gas scrubbers. * temporarily also possible in dry running * directly coupled in bearingless cantilever design * available in immersion depths from 275 - 450 mm Features & Advantages * Service friendly dry running installation * Extremely low vibration and wear operation * Self-centering alignment in the bearing shell * All wetted parts made of corrosion resistant plastic
Request for a quoteLUTZ PUMPEN GMBH
Germany
High performance, compact dimensions, low weight - everything fits with the Lutz B6. The pump shaft is protected by a shaft guide tube against possible "attack" of the pumped medium. Perfectly suited for pumping and draining of neutral and aggressive liquids with low solids content. * on request also available in special immersion depths of 1000 - 3000 mm * Design according to the single pipe principle * Application examples: For conveying and circulating chemicals and solutions in surface treatment, chemical industry and water treatment, etc. Features & Advantages * Wide range of applications * No risk of leakage at the bottom outlet due to safe product removal * Low wear * Stationary installation possible via flange * Also for small container openings
Request for a quoteHASPA GMBH
Germany
Anschluss WM Anschluss DIN Anschluss J Anschluss F Anschluss K Anschluss N Anschluss Direkt Anschluss Fo
Request for a quoteSIKO GMBH
Germany
Resolution max. 5000 pulses/revolution. Through hollow shaft up to max. ø15 mm. Robust bearing construction. -40 °C … +85 °C operating temperature. High shock and vibration resistance
Request for a quoteIDG-DICHTUNGSTECHNIK GMBH
Germany
Types RWDR‑A, RWDRAS, RWDR‑B, RWDRBS, RWDR‑C, RWDRCS
Request for a quoteNOVOTECHNIK MESSWERTAUFNEHMER OHG
Germany
Potentiometric position transducer; robust design with metal flanges, pressure equalization system, GORE-membran and an additional guard tube for the actuating rod; long life span and high adjustement speed; easy to assemble via low-backlash pivot heads with a large angle of freedom; High protection class
Request for a quoteHASPA GMBH
Germany
Handpieces with connection type " D+S" can be connected to shafts with system Duplex and expanding spring.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
HASPA GMBH
Germany
Motor side: DIN-connection Handpiece side: Slide connection GS Type mm Connection Motor / Handpiece shaft length m Art.no. shaft Art.no. core Art.no. casing speed min-1 weight(ca.) g S 4/1 GS28 / GS 16 1,25 101 401 111 401 121 401 24000 600 S 4/2 GS28 / GS 28 1,25 101 402 111 402 121 402 24000 600 S 4/3 DIN 30/ GS 16 1,25 101 403 111 403 121 403 24000 600 S 4/4 DIN 30/ GS 28 1,25 101 404 111 404 121 404 24000 600 S 6/1 GS28 / GS 16 1,25 101 601 111 601 121 601 24000 1000 S 6/2 GS28 / GS 28 1,25 101 602 111 602 121 602 24000 1000 S 6/3 DIN 30/ GS 16 1,25 101 603 111 603 121 603 24000 1000 S 6/4 DIN 30/ GS 28 1,25 101 604 111 604 121 604 24000 1000 Type mm Connection Motor / Handpiece shaft length m Art.no. shaft Art.no. core Art.no. casing speed min-1 weight(ca.) g S 7/1 GS28 / GS 22 1,50 101 701 111 701 121 701 20000 1400 S 7/1 GS28 / GS 22 2,00 11 017 012 11 117 012 11 217 012 20000 1700 S 7/2 GS28 / GS 28 1,50 101 702 111 702 121 702 20000 1400 S 7/2 GS28 / GS 28 2,00 11 017...
Request for a quoteHASPA GMBH
Germany
Motor side connection DIN-Connection Handpiece side connection Claw connection KB Type mm Connection Motor / Handpiece Shaft length m Art.no. shaft Art.no. core Art.no. casing Speed min-1 weight(ca.) g B 6,0 DIN 30/ KB 180 1,50 102 001 112 001 122 001 24000 1000 B 7,1 DIN 20/ KB 180 1,50 102 002 112 002 122 002 20000 1400 B 7,1 DIN 20/ KB 180 2,00 11 020 022 11 120 022 11 220 022 20000 1700 B 7,2 DIN 30/ KB 180 1,50 102 003 112 003 122 003 20000 1400 B 7,2 DIN 30/ KB 180 2,00 11 020 032 11 120 032 11 220 032 20000 1700 B10,1 DIN 30/ KB 180 1,50 102 004 112 004 122 004 16000 2300 B10,1 DIN 30/ KB 180 2,00 11 020 042 11 120 043 11 220 042 16000 2900 B10,2 DIN 30/ KB 250 1,50 102 005 112 005 122 005 16000 2300 B10,2 DIN 30/ KB 250 2,00 11 020 052 11 120 052 11 220 052 16000 2900 B12,0 DIN 30/ KB 250 2,00 102 006 112 006 122 006 12000 4200 B15,0 DIN 30/ KB 310 2,00 102 007 112 007 122 007 5000 6100 Working shafts type C Motor side connection sliede connection GZ Hand piece side...
Request for a quoteHASPA GMBH
Germany
Motor side connection DIN-Connection Handpiece side connection DIN-Connection Type mm Connection Motor / Handpiece Shaft length m Art.no. shaft Art.no. core Art.no. casing Speed min-1 weight(ca.) g D 6.1 DIN 20 / DIN 20 1,50 105 001 115 001 125 001 24000 1200 D 6.2 DIN 30 / DIN 20 1,50 105 002 115 002 125 002 24000 1200 D 6.3 DIN 30 / DIN 30 1,50 105 003 115 003 125 003 24000 1200 D 7.1 DIN 30 / DIN 21 1,50 105 004 115 004 125 004 20000 1400 D 7.1 DIN 30 / DIN 21 2,00 11 050 042 11 150 042 11 250 042 20000 1700 D 7.2 DIN 30 / DIN 30 1,50 105 005 115 005 125 005 20000 1400 D 7.2 DIN 30 / DIN 30 2,00 11 050 052 11 150 052 11 250 052 20000 1700 Type mm Connection Motor / Handpiece Shaft length m Art.no. shaft Art.no. core Art.no. casing Speed min-1 weight(ca.) g D10.1 DIN 30 / DIN 30 1,50 105 006 115 006 125 006 16000 2300 D10.1 DIN 30 / DIN 30 2,00 11 050 062 11 150 062 11 250 062 16000 2900 D10.2 DIN 40 / DIN 30 1,50 105 007 115 007 125 007 16000 2300 D10.2 DIN 40 / DIN 30 2,00...
Request for a quoteHASPA GMBH
Germany
Handpieces with connection type " D+S" can be connected to shafts with system Duplex and expanding spring.
Request for a quoteHASPA GMBH
Germany
Handpieces with connection type " D+S" can be connected to shafts with system Duplex and expanding spring.
Request for a quoteHASPA GMBH
Germany
Handpieces with connection type " D+S" can be connected to shafts with system Duplex and expanding spring.
Request for a quoteHASPA GMBH
Germany
Handpieces with connection type " D+S" can be connected to shafts with system Duplex and expanding spring.
Request for a quoteHASPA GMBH
Germany
Handpieces with connection type " D+S" can be connected to shafts with system Duplex and expanding spring.
Request for a quoteHASPA GMBH
Germany
Handpieces with connection type " D+S" can be connected to shafts with system Duplex and expanding spring.
Request for a quoteHASPA GMBH
Germany
Handpieces with connection type " D+S" can be connected to shafts with system Duplex and expanding spring.
Request for a quoteHASPA GMBH
Germany
Handpieces with connection type " D+S" can be connected to shafts with system Duplex and expanding spring.
Request for a quoteHASPA GMBH
Germany
Handpieces with connection type " D+S" can be connected to shafts with system Duplex and expanding spring.
Request for a quoteResults for
Shafts - Import exportNumber of results
80 ProductsCompany type
Category