Results for
SCHWEIZER GMBH & CO. KG
Germany
High temperature adhesive tape with onesided aluminum foil suitable for a maximum radiant heat of 1000 ° C
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Increases engine performance the exhaust heat remains in the manifold, which improves combustion chamber ventilation and thus performance. Reduces the heat in the engine compartment by up to 70%, resulting in cooler intake air.
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Heat protection and fire protection for pipes and hoses. Also available as mats or rolls for surfaces
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Special fleece to protect roofs, providing a combination of protection, separation and glide functions. Suitable for public roofs when its laminated glide layer is used in combination with an approximately 0.2 mm thick PE foil, thus conforming a glide fleece.[Translate to English:] Special fleece to protect the roof waterproofing with a combined separating and sliding function In combination with the PE separating and sliding film TGF 0.2, it is suitable as a protective and sliding layer for traffic roof structures Coefficient of friction with additional PE film <0.6 according to the requirements of the FLL (DIN 53375)
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigrun Protection and Storage Fleece RMS 500 K protects the roof membrane with simultaneous function of separation, water storage, excellent suction and defined filter function. Installation under the green roof structure directly on the waterproofing Protective layer on roof waterproofing with particularly good suction and capillary action Especially to avoid ponding on uneven roofs Puncture resistance 2,600 N (EN ISO 12236)
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigrun root protection membranes are used on non-root-resistant roof waterproofing under extensive and intensive roof greenings.
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigrun Structured Storage Fleece SSV 800 is used as a protection fleece for pitched roofs with a combined functionality of water storage and drainage.
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
FLL-certified roof protection layer made of soft PVC for installation on non root-proof roofs, for forming a watertight and root-proof basin on green roofs with water accumulation and as water-proof and root-proof lining in planters.
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Thin sheet made from recycled polyethylene for use as a separation, protection and slip sheet.
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
as a protection, separation and slip layer to protection the waterproofing as a second slip layer in conjunction with PE film 0.2 mm under public areas to prevent the transfer of shear and tensile forces for the chemically neutral separation of two incompatible materials Specific properties resistant to bitumen and polystyrene resistant to most chemicals smooth surface ageing resistant moisture-blocking thermally weldable
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigrun Filter Fleece FIL 300 is used as a filtration layer between the drainage and gravel layer on public roofs that are used by trucks and cars.Horizontal filter layer on green roofs between drainage and gravel base layer, under public areas with cars and trucks circulate, as well as pedestrians Filtration of particles from the substrate Puncture resistance 3,800 N (EN ISO 12236) Vertical water permeability 57 l/s x m² (EN ISO 11058) 21 kN/m resp. 24 kN/m max. tensile strenght longitudinal/lateral
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Filter fleeces are horizontal filter layers between drainage, substrate or gravel layers. They are used to separate the various layers and prevent fine particles of the substrate from being slurried into the underlying layers.Horizontal filter layer on green roofs between drainage and substrate layers with areas with increased loads Filtration of particles from the substrate Puncture resistance 1.700 N (EN ISO 12236) Vertical water permeability 90 l/s x m² (EN ISO 11058) 10,5 bzw. 10 kN/m max. tensile strenght longitudinal/lateral
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigrun Filter Fleece FIL 105 is used when the drainage system needs to be protected from fine particles entering from the substrate layer.Horizontal filter layer on green roofs between drainage layer and substrate Filtration of particles from the substrate Puncture resistance 1,200 N (EN ISO 12236) Vertical water permeability 130 l/s x m² (EN ISO 11058) 7,5 kN/m max. tensile strenght longitudinal/lateral
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Trickle protection on the insulation level for inverted roofs, without requirements concerning joint building authority approval for insulating material and the separating layer. Trickle Protection on the insulation level for inverted roofs. without requirements concerning joint building authority approval for insulating material and the separating layer Prevents fine particles from forming sludge in the drainage layer Puncture resistance 1,500 N (EN ISO 12236) Water permeability 100 l/s x m² (EN ISO 11058) Cannot be used as a replacement for separating layers from various manufacturers and approval by the building authority
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigrun Protection and Storage Fleece RMS 1200 protects the roof membrane against damage from high mechanical demands.Protective layer on waterproofing with an additional separating and water reservoir function Particularly suitable as a protective layer on waterproofing with a high mechanical load For separation of products made from incompatible materials Fulfills the requirements of the FLL guideline Puncture resistance min. 3,500 N (EN ISO 12236)
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigrun Protection and Storage Fleece RMS 900 protects the roof membrane against damage from high mechanical demands. Protective layer on waterproofing with an additional separating and water reservoir function Particularly suitable as a protective layer on waterproofing with a moderate mechanical load For separation of products made from incompatible materials Fulfills the requirements of the FLL guideline Puncture resistance min. 2,500 N (EN ISO 12236)
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigreen separating, protective and storage fleeces protect the roof waterproofing or root protection membranes from mechanical stress, separate layers that are incompatible with the material and store water.Protective layer on waterproofing with an additional separating and water reservoir function For separation of products made from incompatible materials Fulfills the requirements of the FLL guideline With a high pyramid puncture resistance in accordance with DIN EN 14574 Puncture resistance min. 1,500 N (EN ISO 12236)
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
OPTIGRÜN INTERNATIONAL AG
Germany
Optigrun Protection and Storage Fleece RMS 300 protects the roof membrane or root barrier membrane against damage from light mechanical demands, separates the materials of incompatible substrates from one another and, depending on the product and its function as protective fleece, stores water.Protective layer on waterproofing with an additional separating and water reservoir function For separation of products made from incompatible materials Fulfills the requirements of the FLL guideline Puncture restistance min. 1,000 N (EN ISO 12236)
Request for a quoteTOX-DÜBEL-TECHNIK GMBH
Germany
Features • TOX patent: Processing possible without pre-drilling or special tools • Effectively prevents thermal bridges • No pressure load on the facade • Fast processing and immediately loadable • Reinforced wall plug neck prevents possible twisting off • 100% nylon Description & Area of Application • Insulation wall plug with coarse, conical thread and flat head drive TX40 • Holder for chipboard screw Ø 4.5 - 5.0 mm • Wide range of lengths
Request for a quoteZOLLER & FRÖHLICH GMBH
Germany
For conductor cross-sections from 0.14 up to 150 mm² (AWG 26 – 300 kcmil). Material: tin-plated copper. Tolerances according to DIN 46228 part 4
Request for a quoteZOLLER & FRÖHLICH GMBH
Germany
For conductor cross-sections from 0.14 up to 10 mm² (AWG 26-8). Material: tin-plated copper. Tolerances according to DIN 46228 part 4
Request for a quoteZOLLER & FRÖHLICH GMBH
Germany
For conductor cross-sections from 2 x 0.34 up to 2 x 10 mm² (AWG 2 x 22 – 2 x 8). Material: tin-plated copper. Tolerances according to DIN 46228 part 4
Request for a quoteZOLLER & FRÖHLICH GMBH
Germany
For conductor cross-sections from 2 x 0.34 up to 2 x 16 mm² (AWG 2 x 22 – 2 x 6). Material: tin-plated copper. Tolerances according to DIN 46228 part 4
Request for a quoteZOLLER & FRÖHLICH GMBH
Germany
Technical information Product information Designed specifically for the machines of the AM-/CR-series of Zoller + Fröhlich the crimp force monitoring CK 01 is an integrated component for the automatic monitor of crimping operations and thus ensures high quality crimping products. The crimp force monitoring CK 01 can be directly integrated into the machines from Zoller + Fröhlich or installed externally as a retrofit kit. Special features Precise high-speed, crimp force analysis For wire cross-sections from 0.14mm2 – 6 mm² (AWG 26 – 10) Integrated SPC (Static Process Control) with online option Absolute power measurement in Newton [N] TFT-graphic-colour-display with touchscreen Storing up to 50 different programs and parameters Quality assurance through documentation of each crimp Recognize the following crimp faults Missing strands Improper wire gauge Missing crimp contact Inadequate stripping Improper crimp depth
Request for a quoteZOLLER & FRÖHLICH GMBH
Germany
Technical information The AM 02 C (“Compact“) is an electropneumatic, modular stripper-crimper for rapid and reliable processing of loose insulated Z+F ferrules with cross sections from 0.14 – 0.34 mm2 (AWG 26 – 22) and the AM 02.1 C is for uninsulated Z+F ferrules with cross sections from 0.14 – 0,75 mm2 (AWG 26 – 18). Special features Easy tool change Short tooling time Crimp quality conforms to DIN 46228 Compact design
Request for a quoteSCHOCK GROUP
Germany
With SCHOCK Powder Coating, we achieve high-performance and visually appealing product surfaces with long-term corrosion protection and individual color customization. SCHOCK Powder Coating operates with state-of-the-art technology, fast color change cycles, and sustainable, energy-efficient production. Our coating facility is located at the central logistics hub of the SCHOCK Group in DE-72296 Schopfloch. This ensures our customers receive punctual, reliable, and cost-effective deliveries. Electrostatic powder coating relies on the attraction between parts with opposite electrical charges. When high requirements for impact resistance and weather resistance are needed, powder coating is indispensable. These properties have led industries such as equipment manufacturing, machinery manufacturing, medical technology, heating and ventilation technology, household appliances, store fixtures and furniture manufacturing, as well as the automotive industry to largely transition from wet paint
Request for a quoteResults for
Insulators - Import exportNumber of results
27 ProductsCompany type