Insulators - Import export

Our uninsulated halls offer simple and inexpensive all-round protection for the storage of temperature-insensitive goods. They are ideally suited for storage, roofing of construction sites or for temporary assembly. The areas of application of our uninsulated halls: - Storage for temperature-insensitive goods - protected loading of transporters - protected parking and storage area - Picking for goods of all kinds - Maintenance and repair For your roof and wall covering you can choose between a PVC tarpaulin or a trapezoidal sheet. Made of highly tear-resistant, and durable industrial PVC, tarps are a cost-effective alternative compared to other cladding options.

High-Temperature insulating hose (HT hose) protects heat-conveying lines and prevents thermal damage to adjoining parts with a fiberglass and double-coated silicon rubber top layer. The HT hose is available as a self-contained or re-closable sleeve as well as a custom-made mat. The approximate surface temperature of the duct can be up to 500°C.

VDE approved mat designed for use in front of open switchboards and high voltage equipment. Provides safety for operatives against electric shocks. Fine fluted surface has slip-resistance benefits. Tested to 50,000 volts according to DIN EN 60243-1 (VDE0303 part 21) IEC 60243-2:1996

Our insulated brush-holder bolts provide the mounting basis for most leg brush holders and brush holders with clamps. What fits your design? At MACK, we always go into things in depth and talk about the details. We fit our holders on insulated brush-holder bolts, which can be produced individually to special measurements.

CSN® Insulator Heaters are used in flue gas cleaning systems for preheating the insulators and as protection of the equipment against condensation and freezing during shutdown periods

The light weight and pliability of aluminum make it easy to work with and can streamline installation. In addition to the weight advantage and ductility, aluminum provides a complete barrier to light, moisture and magnetic waves. Impermeable to all gases including oxygen, aluminum also provides superior fireproofing capabilities for both industrial and residential construction. Aluminum insulation offers good noise reduction properties along with resistance to corrosion and heat. Not only does this improve interior environments, it also increases product life and efficiency. These proven characteristics continue to make aluminum the leader in insulation and the preferred choice for all types of building and construction.

Our OHLER product line is specifically designed for use in automobiles and caravans. Novelis is one of the leading suppliers of flexible tubes and hoses for the automotive sector with products used for heat protection, air ducts, exhaust pipes, thermal insulation and energy absorption.

TEXTALU® E is a thin wall glass fibre braid made of glass fibres with heat-reflecting aluminium coating. Its reflecting surface guarantees that the protective sleeve made of this high-performance material maintains a nearly constant interior temperature even under strongly fluctuating ambient temperatures. This non-ductile braid sleeve is ideal for protecting lines, cables and cable sets against radiation heat.

Bentley-Harris® Textalu 1202 is an insulative fiberglass sleeving with a heavy aluminum coating designed to protect components in high temperature areas. It provides superior insulation to components that must maintain stable temperatures to assure performance efficiency. Textalu 1202 is used on wire harnesses, sensor control wiring and cable assemblies in close proximity to engines and exhaust systems. Due to its elastic structure, Textalu 1202 conforms well to the variable profiles of the components it protects. Its braided construction allows good flexibility in temperatures as low as -50°C. The infra-red emissivity rating of Textalu 1202 heavy aluminum coating, combined with its fiberglass braid, ensures temperature stability inside the Textalu sleeving despite frequent external temperature fluctuations due to radiant heat.

Optigrun Protection and Storage Fleece RMS 500 K protects the roof membrane with simultaneous function of separation, water storage, excellent suction and defined filter function. Installation under the green roof structure directly on the waterproofing Protective layer on roof waterproofing with particularly good suction and capillary action Especially to avoid ponding on uneven roofs Puncture resistance 2,600 N (EN ISO 12236)

The HTSD-High Temperature Drum Heater is our high temperature drum heater (220 °C) and exclusively suitable for steel drums. The heating jacket is used in areas where large surfaces need heating over 90 °C. This barrel heater is available in four standard sizes (25 / 50 / 105 / 200 liters) and can be manufactured to customer specifications as well. HISD heater jackets are particularly suited to melt soaps, fats, varnishes and oil-based products, or respectively reduce their viscosity. The 200-liter element can be combined with the HBD - base drum heater to reduce the heat-up time. The heating element of the HTSD heating jackets is sewn into a fleece made of silicone-insulated fibreglass material. The insulating outer housing consists of a binder-free mat made of textile glass. The heating element is therefore double insulated (protection class II). An optimal contact with the barrel, as well as a quick assembly and dismantling are achieved by the use of quick release buckles.

The IBC/Bpro-Container Jacket Heater is an insulated heater jacket for the heating of bottle-in-a-cage containers. All four sides of the container are covered by the heater. The container heater has two separate heating circuits (top and bottom), allowing for an economical heating of half-filled containers, too. The HILC unheated insulated lid can be used in addition to shorten the heat-up time. The IBC/B heating jacket can also be combined with the IBC/A container base heater. It's a silicone heater mat that is placed below the plastic container before that is filled.

Due to their porous structure, VYON® and GURON® are ideal for sound insulation, as they enable sound attenuation of up to 30 dBA. Silencer Noise is dangerous to health. That is why noise reduction is an important task in the area of ​​occupational safety. Due to their porous structure, VYON® and GURON® are ideal for sound insulation, as they enable sound attenuation of up to 30 dBA. In addition, VYON® silencers are also suitable for ventilation and filtration. Connection size: 8 mm (push-in silencer) Ø mm: 13.5 +-0.5 mm Length of sintered body with collar: 22 +- 1.5 mm Total length including thread: 43.5 +-3 mm

Due to their porous structure, VYON® and GURON® are ideal for sound insulation, as they enable sound attenuation of up to 30 dBA. Silencer Noise is dangerous to health. That is why noise reduction is an important task in the area of ​​occupational safety. Due to their porous structure, VYON® and GURON® are ideal for sound insulation, as they enable sound attenuation of up to 30 dBA. In addition, VYON® silencers are also suitable for ventilation and filtration. Connection size: 1/2“ Ø mm: 24.8 +/-1 mm Length of sintered body with collar: 68 +-1.2 mm Total length including thread: 78.5 +-1 mm

Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements

Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements

Due to their porous structure, VYON® and GURON® are ideal for sound insulation, as they enable sound attenuation of up to 30 dBA. Silencer Noise is dangerous to health. That is why noise reduction is an important task in the area of ​​occupational safety. Due to their porous structure, VYON® and GURON® are ideal for sound insulation, as they enable sound attenuation of up to 30 dBA. In addition, VYON® silencers are also suitable for ventilation and filtration. Connection size: 3/4“ Ø mm: 37.6 +/-0.5 mm Length of sintered body with collar: 124.8 +-1 mm Total length including thread: 139.8 +-1 mm

Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S )

Optigrun root protection membranes are used on non-root-resistant roof waterproofing under extensive and intensive roof greenings.

Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements As a manufacturer and dealer

Due to their porous structure, VYON® and GURON® are ideal for sound insulation, as they enable sound attenuation of up to 30 dBA. Silencer Noise is dangerous to health. That is why noise reduction is an important task in the area of ​​occupational safety. Due to their porous structure, VYON® and GURON® are ideal for sound insulation, as they enable sound attenuation of up to 30 dBA. In addition, VYON® silencers are also suitable for ventilation and filtration. Connection size: 6 mm (push-in silencer) Ø mm: 12.5 +-0.5 mm Length of sintered body with collar: 24.5 +-1.5 mm Total length including thread: 45 +-3 mm

Optigrun Structured Storage Fleece SSV 800 is used as a protection fleece for pitched roofs with a combined functionality of water storage and drainage.

FLL-certified roof protection layer made of soft PVC for installation on non root-proof roofs, for forming a watertight and root-proof basin on green roofs with water accumulation and as water-proof and root-proof lining in planters.

Thin sheet made from recycled polyethylene for use as a separation, protection and slip sheet.

as a protection, separation and slip layer to protection the waterproofing as a second slip layer in conjunction with PE film 0.2 mm under public areas to prevent the transfer of shear and tensile forces for the chemically neutral separation of two incompatible materials Specific properties resistant to bitumen and polystyrene resistant to most chemicals smooth surface ageing resistant moisture-blocking thermally weldable

Special fleece to protect roofs, providing a combination of protection, separation and glide functions. Suitable for public roofs when its laminated glide layer is used in combination with an approximately 0.2 mm thick PE foil, thus conforming a glide fleece.[Translate to English:] Special fleece to protect the roof waterproofing with a combined separating and sliding function In combination with the PE separating and sliding film TGF 0.2, it is suitable as a protective and sliding layer for traffic roof structures Coefficient of friction with additional PE film <0.6 according to the requirements of the FLL (DIN 53375)

Optigrun Filter Fleece FIL 300 is used as a filtration layer between the drainage and gravel layer on public roofs that are used by trucks and cars.Horizontal filter layer on green roofs between drainage and gravel base layer, under public areas with cars and trucks circulate, as well as pedestrians Filtration of particles from the substrate Puncture resistance 3,800 N (EN ISO 12236) Vertical water permeability 57 l/s x m² (EN ISO 11058) 21 kN/m resp. 24 kN/m max. tensile strenght longitudinal/lateral

Filter fleeces are horizontal filter layers between drainage, substrate or gravel layers. They are used to separate the various layers and prevent fine particles of the substrate from being slurried into the underlying layers.Horizontal filter layer on green roofs between drainage and substrate layers with areas with increased loads Filtration of particles from the substrate Puncture resistance 1.700 N (EN ISO 12236) Vertical water permeability 90 l/s x m² (EN ISO 11058) 10,5 bzw. 10 kN/m max. tensile strenght longitudinal/lateral

Optigrun Filter Fleece FIL 105 is used when the drainage system needs to be protected from fine particles entering from the substrate layer.Horizontal filter layer on green roofs between drainage layer and substrate Filtration of particles from the substrate Puncture resistance 1,200 N (EN ISO 12236) Vertical water permeability 130 l/s x m² (EN ISO 11058) 7,5 kN/m max. tensile strenght longitudinal/lateral