Encoders - Import export

High precision magnetic absolute linear encoder for CNC machine tools in robust design Measuring lengths:140mm - 3.640mm Accuracy: 3+3ML/1.000 µm(p-p) or 5+5ML/1.000µm(p-p) Max. Resolution: 10nm Max. Response speed: 200m/min Extremely robust against vibration and shock Insensitive to contamination such as oil, water, moisture and dust due to the magnetic operating principle Same thermal expansion behavior as steel or cast iron machine bed Compatible with serial protocols from Fanuc, Mitsubishi and Siemens Siemens DriveCliQ version is Functional Safety certified

Highly accurate magnetic absolute linear encoder with slim design for machine tools with Siemens, Fanuc, and Mitsubishi CNCs Easy integration in cramped installation conditions due to the slim design Insensitive to contamination such as oil, water, moisture and dust due to the magnetic operating principle Same thermal expansion behavior as steel or cast iron. Compatible with serial protocols from Fanuc, Mitsubishi and Siemens Siemens DRIVE-CLIQ version is Functional Safety certified

The WH58MR rotary encoder is a magnetic safety rotary encoder with redundant position detection and hollow shaft, which has been specially developed for use in mobile machines. It can be used in safety-critical applications – up to performance level PLd. Thanks to its particularly robust design, an optionally redundant CANopen or CANopen Safety interface, it is ideally suited for tough conditions in mobile machines. Profile WH58MR:

Exposed incremental linear encoder with magnetic grating. Compact tape scale with high accuracy and integrated reference mark. Non-contact magnetic detection principle Magnetic principle with exceptional resistance to oil, dust, vibration and shock. Effective length from 50 mm to 100,000 mm Output signal with PL101 read head series: 1Vpp /TTL/Serial Yaskawa/Serial Panasonic/Serial Mitsubishi Three versions with different reference point specifications are available

Exposed linear encoder (magnetic tape). Extremely insensitive and easy installation with large tolerances. Magnetic grating with 2mm pitch Extremely insensitive to oil, dirt, vibration and shock. Accuracy: +/-(15 + 5L/1,000)μm (L=measuring length in mm). Resolution SL331 with PL60: 2μm High response speed: 300 m/min Compatible read head: PL60-3 (not included) Measuring lengths of up to 8m Easy installation Position control of long measuring lengths up to 8m

Interferometric angle measuring system, non-contact, open design for resolutions of up to 1.5nrad. The BH20 angle measuring system in open non-contact design is based on interferometric signal scanning. It offers extremely high resolutions and repeatability. The interferometric scanning produces an extremely high signal quality with extremely low noise.

Exposed linear encoder ( magnetic tape) for resolutions up to 5µm. Very easy installation by clamping or gluing with large mounting tolerances. Perfectly suited for simple length measurement in a wide range of applications. Measuring lengths: 200mm - 30m Accuracy: +/-(25+5L/1.000)µm; L= measuring length Graduation period: 5mm Recommended for resolutions up to 5µm Compatible with PL20C, PL25-3 and PL81/PL82 read heads (sold separately) SL110: open length measuring system in aluminum profile for clamp-on mounting SL130: open length measuring system as tape for sticking on Simple mounting Extremely robust position measuring system for large measuring ranges

Incremental linear encoder for manual machine tools or measuring applications with counter display. Magetic detection principle makes it extremely insensitive against contamination such as oil, water and dust. Wide tolerances for easy installation For connection to LG20 and LH70 series position indicators

Absolute operating principle with magnetic signal sensing via two read heads. Extremely insensitive to oil, moisture and dust due to magnetic signal sensing. Large inner diameters of 96mm or 180mm. High accuracy and resolution. Perfectly suited for applications in CNC machine tools e.g. swivel heads or rotary tables.With various serial interfaces available

High-precision absolute angle encoder with flat design with integral bearing Magnetic operating principle therefore extremely insensitive Perfectly suited for applications in CNC machine tools such as rotary tables Serial interfaces for Siemens and Fanuc. Siemens version with Functional Safety certification.

Highly accurate absolute angle measuring system with flat design and integrated bearing. Magnetic operating principle therefore extremely insensitive Perfectly suited for applications in CNC machine tools such as rotary tables. With serial interfaces for Fanuc, Mitsubishi and Yaskawa CNC available.

Miniature wire-actuated encoder designed to capture linear distances with a maximum measurement length of 2000 mm. Compact design. Universally applicable thanks to standardized interfaces. Easy mounting. Measurement lengths up to max. 2000 mm. Potentiometer, voltage, power output or incremental encoder. Housing made of reinforced plastic.

Measuring range 0 … 5000 mm (196.85 inches). Absolute measuring system. Pressure-resistant up to 350 bar, pressure peaks up to 650 bar. High degree of flexibility, adjustable to all measuring lengths thanks to teach-in. Redundant interfaces available. Safety version usable up to Perfomace Level d. Analog, CANopen, SAE J1939, CANopen Safety interfaces

Magnetic, absolute multi-turn rotary encoder WV36M/CAN - batteryless, with CANopen or SAE J1939 interface. Owing to its double ball bearing, small design and wear-free magnetic measurement method, the WV36M/CAN is also best suited for positioning jobs in mechanically demanding environments. Compact design (36.5mm diameter). CANopen (DS406) or SAE J1939 (DS417) interface. Multi-turn without battery. Double ball bearings. 12 bit multi-turn (4096 revolutions). 12 bit single-turn (4096 steps).

Magnetic absolute multi-turn rotary encoder in heavy-duty stainless-steel design – batteryless, robust and flexible. The WV42HD is predestined for demanding measuring jobs in the heavy-duty area owing to its extremely robust housing,  its bearings, which are designed to tolerate high radial and axial loads as well as its high resistance against external impact. Heavy-duty design in stainless steel. Compact design (42 mm diameter). IP69K, IP68 protection category. Resistant to salt spray and acids. CANopen interface, SSI, analog. Multi-turn without battery. High shaft loadability of up to 270 N. 16 bit mult-iturn (65536 revolutions). 12 bit single-turn (4096 steps).

Wire-actuated encoder with analog output, potentiometric, current source or voltage output, with a measuring length of up to 6000mm. Easy adjustment of the output signal to the actual measuring length via integrated gear mechanism. Robust design. Measurement lengths up to max. 6000 mm. Potentiometer, voltage or power output. Housing made of aluminum and plastic. Potentiometer/resistance range adapted to actual measurement length via an integrated gear. Various wire types.

Magnetic, absolute multi-turn rotary encoder WV36M/SSI -batteryless, with SSI interface. Owing to its double ball bearing, small design and wear-free magnetic measurement method, the WV36M/SSI is also best suited for positioning jobs in mechanically demanding environments. Compact design (36.5mm diameter). SSI interface. IP65 protection category. Multi-turn without battery. Double ball bearings. 13 bit multi-turn (8192 revolutions). 12 bit single-turn (4096 steps).

Miniature wire-actuated encoder designed to capture linear measurement distances. Its measuring length of 600 mm is very long considering its small size. SG5 is universally usable thanks to its standardized interfaces.  Very small design. Universally applicable thanks to standardized interfaces. Easy mounting. Measurement lengths up to max. 600 mm. Potentiometer, voltage or power output. Housing made of reinforced plastic.

Universally usable wire-actuated encoder with measuring lengths of max. 12000mm, robust design as well as precise and safe wire guidance; prepared for the attachment of various types of rotary encoders with 58mm standard flange. Robust design. Easy mounting. Measurement lengths up to max. 12000 mm. Incremental or absolute encoder. Housing made of aluminum and plastic. High flexibility thanks to free choice of rotary encoders with 58 mm standard flange. Various wire types.

Resolution max. 5000 pulses/revolution. Through hollow shaft up to max. ø28 mm. M12 or cable connection

The SGH wire-actuated encoder measures the absolute, direct cylinder stroke in the hydraulic cylinder. Cost-intensive drilling of the piston is no longer required thanks to the new measurement system. As a result there are lower integration costs compared with other measurement systems and weakening of the piston is effectively avoided. The highlight: The measurement system can even be used in telescopic cylinders!In the framework of  SPS IPC Drives 2015, exhibition and online visitors nominated the SGH10 as the winner of the DirectIndustry i-NOVO Award in the TECH category. Measuring range 0 … 1000 mm. Absolute measuring system. CANopen interface, analog: Current and voltage. Operating voltage 9 ... 32 VDC. Pressure-resistant up to 300 bar, pressure peaks up to 500 bar. High degree of flexibility, adjustable to all measuring lengths thanks to teach-in . High electro-magnetic compatibility. High shock and vibration resistance.

Universally applicable wire-actuated encoder with measuring lengths of max. 6000 mm, robust construction as well as precise and safe wire guidance, prepared for attaching the most diverse types of rotary encoders with a 58 mm standard flange. Robust design, Easy mounting, Measurement lengths up to max. 6000 mm, Incremental or absolute encoder, Also available as a safety version in combination with WV58MR rotary encoder, High flexibility thanks to free choice of rotary encoders with 58 mm standard flange, Various wire types, With PURE.MOBILE technology

Universally applicable wire-actuated encoder with measuring lengths of max. 12000 mm, robust construction as well as precise and safe wire guidance, prepared for attaching the most diverse types of rotary encoders with a 58 mm standard flange. Robust design, Easy mounting, Measurement lengths up to max. 12000 mm, Incremental or absolute encoder, Also available as a safety version in combination with WV58MR rotary encoder, High flexibility thanks to free choice of rotary encoders with 58 mm standard flange, Various wire types, With PURE.MOBILE technology

Very robust wire-actuated encoder in compact design for numerous applications including crane construction, stage construction, warehousing technology, etc., with a measuring length up to 3000 mm. Easy, universally changeable installation. Compact, robust design. Variable mounting options. Measuring lengths up to 3000 mm. Potentiometer, voltage or power output. Housing made of zinc die-cast and plastic. Lockable ventilation holes against condensation. High tightness at the rope outlet. M12 plug connection.

Compact wire-actuated encoder with a max. measurement length of 2000 mm and an analog output. Compact design. Universally applicable thanks to standardized interfaces. Easy mounting. Measurement lengths up to max. 2000 mm. Potentiometer, voltage or power output. Robust zinc die-cast housing.

Universally applicable wire-actuated encoder with measuring lengths of max. 6000 mm, robust construction as well as precise and safe wire guidance, geared up for attaching the most diverse types of rotary encoders with a 58 mm standard flange. Robust design. Easy mounting. Measurement lengths up to max. 6000 mm. Incremental or absolute encoder. Housing made of aluminum and plastic. High flexibility thanks to free choice of rotary encoders with 58 mm standard flange. Various wire types.

Compact wire-actuated encoder for rotary encoders with 36 mm max. flange diameter  Wire-actuated encoder for rotary encoder with max. Ø40 mm flange. Measurement lengths up to 2000 mm. Sturdy zinc die-cast housing, robust design, stable measuring rope (stainless steel). Very compact design.

Resolution max. 5000 pulses/revolution. Through hollow shaft up to max. ø15 mm. Robust bearing construction. -40 °C … +85 °C operating temperature. High shock and vibration resistance

Miniature rotary encoder with high precision. Small design, Ø 28 mm. Resolutions of max. 1024 pulses/revolution. Robust bearing construction. Short circuit-proof outputs