Results for
IGUS® GMBH
Germany
This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.
Request for a quoteIGUS® GMBH
Germany
For designs that require a stepper motor with directly integrated lead screw, drylin® E offers the ideal solution. The stand-alone versions with NEMA11 stepper motor (very small type) are available in a compact type with or without encoder. The lead screw is centred and in combination with the dryspin® high helix thread technology, the system has a long service life. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.
Request for a quoteIGUS® GMBH
Germany
drylin® ZLW-0630 basic toothed belt axis, basic version, feed rate 54mm/rev, aluminium profile, surface: hard-anodised, neoprene toothed belt in black, guide carriage length 60mm, shaft end support made of aluminium, alignment of drive pin on the right, stepper motor with stranded wire. Configure drylin SHT linear modules individually here: https://igus.eu/ddx
Request for a quoteZOLLER & FRÖHLICH GMBH
Germany
Technical information Product information Designed specifically for the machines of the AM-/CR-series of Zoller + Fröhlich the crimp force monitoring CK 01 is an integrated component for the automatic monitor of crimping operations and thus ensures high quality crimping products. The crimp force monitoring CK 01 can be directly integrated into the machines from Zoller + Fröhlich or installed externally as a retrofit kit. Special features Precise high-speed, crimp force analysis For wire cross-sections from 0.14mm2 – 6 mm² (AWG 26 – 10) Integrated SPC (Static Process Control) with online option Absolute power measurement in Newton [N] TFT-graphic-colour-display with touchscreen Storing up to 50 different programs and parameters Quality assurance through documentation of each crimp Recognize the following crimp faults Missing strands Improper wire gauge Missing crimp contact Inadequate stripping Improper crimp depth
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For stripping solid, stranded or finely stranded conductors with standard insulation • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • With adjustable screw for easy adjustment to the required wire or strand diameter • With opening spring • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For stripping solid, stranded or finely stranded conductors with standard insulation • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • With adjustable screw for easy adjustment to the required wire or strand diameter • With opening spring • Handles coated with plastic • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For stripping solid, stranded or finely stranded conductors with standard insulation • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • With adjustable screw for easy adjustment to the required wire or strand diameter • With opening spring • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
For stripping solid, stranded or finely stranded conductors with standard insulation With V-shaped cutting edge for wires and strands up to a max. of 5 mm or 10 mm conductor cross section With adjustable screw for easy adjustment to the required wire or strand diameter With opening spring Handles with 1000V multi-layered insulation according to DIN EN/IEC 60900 Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For cutting hard and soft wires • With cable stripper function for all common cables ranging from Ø 8 mm to Ø 13 mm • For accurate, fast and safe stripping of all common round cables • Cutting edges inductively hardened • Precision cutting edge for the finest wires • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened
Request for a quoteMETZNER MASCHINENBAU GMBH
Germany
The Metzner AM 1000 is a sensation among the tabletop units. The automatic cutting and stripping machine processes cables, strands and wires up to 9 mm diameter and 6mm² cable cross-section with a special cutting and pull-off force (optional 10 mm², depending on material). The presettings are conveniently made via the modern 12" touch panel, where the operator can define all processes. Thanks to the sensors for diameter and material recognition, the AM 1000 works extremely precisely. Another special feature is the tool-free replacement of guides and rollers. This means that the AM 1000 can be changed over in just one minute. With the extensive interface preparation, the machine can be optimally expanded with peripheral devices and adapts to all customer requirements. The compact design with retractable touch-screen and the low weight of only 28 kg also offer special comfort. This makes the AM 1000 especially easy to transport.
Request for a quoteHERBERT WALDMANN GMBH & CO. KG
Germany
Thanks to its maintenance-free high-power LED technology, the SL spotlight with flexible tube impresses for its extremely long service life. The robust aluminium housing will withstand even the tough environment of working machinery. — LED technology — Colour temperature neutral white 5000 K — Colour rendering index > 70 — 10° or 30° angle of illumination — Housing made of die-cast aluminium painted black — 3 mm thick safety glass — Flexible tube — Maximum allowed ambient temperature Ta max 40° C — LED service life (L70) > 50,000 h — Switch in the light head for On/Off — Degree of protection IP67, protection class II (with plug-in power supply) or III (without plug-in power supply) — Supplied with approx. 3 m connecting cable and plug-in power supply with plug type CEE 7/16 (Euro plug), BS 1363 and NEMA 1-15P or free stranded wire ends — Various fasteners as accessories
Request for a quoteHERBERT WALDMANN GMBH & CO. KG
Germany
Due to its maintenance-free high-power LED technology, the SL pivoting-head luminaire impresses for its extremely long service life. The robust aluminium housing and the safety glass cover will withstand even the tough environment of working machinery. — LED technology — Colour temperature neutral white 5000 K — Colour rendering index > 70 — 10° or 30° angle of illumination — Housing made of die-cast aluminium painted black — 3 mm thick safety glass — Pivoting head — Maximum allowed ambient temperature Ta max 40° C — LED service life (L70) > 50,000 h — Without switch — Degree of protection IP67, protection class III — Supplied with approx. 3 m connecting cable with free stranded wire ends — Various fasteners as accessories
Request for a quoteMETZNER MASCHINENBAU GMBH
Germany
Plastic-coated steel cablestrands are cut to length using a special shear cut module and then stripped with the cutting module of the AM3500 without the wires "jumping open".Bare steel cable wires are transported by the modified AM 3500 directly to the special cutting machine, which is coupled between the AM 3500 and the material stacker and which cuts the material to length by a thermal process. Due to the special electric welding process used here, the individual wires do not twist up during cutting, and a smooth rope start and a smooth rope end without thickening are produced. Long steel cable wires/strands are placed in a tray after processing, while short pieces of material fall down a chute into a collecting container. With the high-performance solution developed by Metzner, the customer can process different types of material in different processes. Further advantages of the machinery are high precision, high quality, an increase in productivity and lower personnel costs.
Request for a quoteLEONI DRAHT GMBH
Germany
Round copper wires made from Cu-ETP1 and Cu-OF1 in bare, tin-plated, nickel-plated, silver-plated or gold-plated, soft annealed. Single-wire diameter ranging from Ø 0.05 mm to Ø 0.51 mm. Number of wires used for strands: between 3 and 24 wires (subject to single-wire diameter).
Request for a quoteLEONI DRAHT GMBH
Germany
Round copper wire made from Cu-ETP1, Cu-OF1 and LEONI Histral® alloys, in bare, tin-plated, nickel-plated and silver-plated, soft annealed. Single wire diameter ranging from Ø 0.05 mm to Ø 0.254 mm. Number of wires used for strands: between 2 and 16 (subject to single-wire diameter). Single wire or multi wire on special bobbins fit for use in braiding machines. The braids manufactured by these machines are used in cables and conductors geared towards electromagnetic shielding or protection against damage as well as serving as a reinforcement.
Request for a quoteLIQUOSYSTEMS GMBH
Germany
With the Nano Tank single fermentation control you have a control unit directly on the tank in your brewery or winery. The actual and target display on the device allows a good temperature overview, nano tank, individual fermentation control directly on the tank, actual and target display Connection cable approx. 6 m with stranded wire, sleeve 7 mm x 240 mm Housing polycarbonate, can be networked with iFerm Nano Terminal With our modern single fermentation control Nano Tank you have a control unit directly on the tank in your brewery or winery. The actual and target display on the device allows a good temperature overview. The housing is made of polycarbonate and the rear sleeve is made of stainless steel. This enables simple assembly on a stem sleeve on the tank
Request for a quoteLIQUOSYSTEMS GMBH
Germany
With the Nano Tank single fermentation control you have a control unit directly on the tank in your brewery or winery. The actual and target display on the device allows a good temperature overview, nano tank, individual fermentation control directly on the tank, actual and target display Connection cable approx. 6 m with stranded wire, sleeve 7 mm x 240 mm Housing polycarbonate, can be networked with iFerm Nano Terminal With our modern single fermentation control Nano Tank you have a control unit directly on the tank in your brewery or winery. The actual and target display on the device allows a good temperature overview. The housing is made of polycarbonate and the rear sleeve is made of stainless steel. This enables simple assembly on a stem sleeve on the tank
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Stranded wires - Import exportNumber of results
18 ProductsCountries
Category