Probes - Import export

Robust and highly accurate incremental probes with magnetic operating principle and USB interface for easy evaluation. The gauges are available with the following measuring ranges: 10mm / 25mm / 50mm / 100mm. Extremely insensitive to contamination such as oil mist, moisture and dust. Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring fixtures, assembly and manufacturing plants. A simple evaluation software for the USB interface is included.

Incremental length probe with magnetic detection principle for high reliability. Very high accuracy and repeatability Extremely insensitive to contamination such as oil mist, moisture and dust Ball spline bearing of the spindle for long life time Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines

High accuarcy incremental length probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring devices, assembly and production lines

■ Measuring on turbo vanes and shafts ■ TTL output for speed measurement ■ Analogue monitor output for gap control ■ High resolution ■ High dynamics ■ Low current consumption ■ High noise immunity

Incremental lengths probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust. Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing plants.

United Process Controls' probe certification program is designed to maximize the life of a probe and ensure the most accurate readings possible. All probes are tested in a certified atmosphere against a probe standard and must meet deviation criteria.

For measuring gas concentration in shafts or just below the ceiling.

The new Scout VGS 4500 measuring station consists of measuring probes mounted on the front of the vehicle and a measuring cell installed within the vehicle. These two parts are connected via a suction hose. The system can be mounted on different type of vehicles such as a pickup truck, quad or car. To adapt to nature of the surface to be measured, the probe distance can be adjusted quickly and it is just as easy to store the entire front probe. With the Scout VGS 4500 measuring station from Schütz, very large sections of network can be inspected and the results can be recorded in a short time. With the vehicle-based measuring system, measurements are accurately taken at speeds up to 50 km/h. Even under the most difficult conditions, Scout VGS 4500 has proven its reliability. The system was successfully subjected to a resistance test in the desert at an outside temperature of over 36 degrees Celsius.

Four-pole measurement at minimum space: coaxial contact probes with inner conductor as sense pin, from smallest pitches up to highest currents.

At the limit of what is possible: Reliable contact probes for finest structures and semiconductor contacts down to 40μm pitch.

With our UV probes, we offer calibrated probes for measuring of the irradiance in areas that are difficult to access. The UV probes are available in three versions and several standard lengths of 15 cm to 60 cm. With an outer diameter of only 6 mm, the UV probes are a perfect supplement for the precise radiometers RMD, as well as for the spectral radiometers UVpad E and SR900. All UV probes come with a diffuser, which enables the absolute measurement of irradiance and which ensures the required cosine correction during a non-perpendicular irradiation. The UV probes are, together with the radiometers, traceably calibrated to the PTB, recalibratable and are supplied with a calibration certificate by the factory. By using appropriate materials, an outstanding long-term stability is reached. A repair service and parts supply is of course available for many years.

The UV measuring probes with 14 mm diameter only serve as compact, long-term, stable measuring heads for the supervision of UV irradiation systems and for UV measurements in inaccessible locations. In addition, optional water and light guide adapters enable the application in hot locations and in water disinfection systems. The integrated electronics generate a signal voltage that is transferred to the UV monitor RM-31 or to the PLC with low noise by a shielded cable.

Incremental length probe with magnetic detection principle for high reliability. with USB interface. Very high accuracy and repeatability. Resolution 0,1µm or 0,5µm Extremely insensitive to contamination such as oil mist, moisture and dust Ball spline bearing of the spindle for long life time Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines. Basic measuring software included

Mineral insulated thermocouples are thermo wires compressed in fire resistant magnesium oxide which ensures a high pressure resistance. Thermocouples type K are suited for the range -200…+1100 °C. The shock resistant construction assures a long life span.

High-quality and precise humidity / temperature sensor with integrated measuring transducer (output 0-10V) suitable for building automation, drying and air-conditioning technology (HVAC), outdoor or industrial applications.

High-quality and precise humidity / temperature sensor (passive, Pt1000) with integrated measuring transducer (output humidity 0-10V) suitable for building automation, drying and air-conditioning technology (HVAC), outdoor or industrial applications.

High-quality and precise humidity / temperature sensor with integrated measuring transducer (output 0-10V) suitable for building automation, drying and air-conditioning technology (HVAC), outdoor or industrial applications.

This humidity and temperature probe with digital I²C interface excels with its wide measurement ranges, high accuracy and robust construction design. It is therefore suitable for most applications.

The digital B+B humidity/temperature probe HYT131 is ideally suited for climate monitoring in e.g. warehouses or storage-rooms.

The leakage sensor enables a realiable detection of water or other conductive media in seconds. The leakage sensor can be easily integrated into switching modules and systems via its RJ12 connector.

This B+B dew formation probe is a combined sensor consisting of two single sensors.

This innovative humidity- and temperature probe communicates via digital I²C interface. Due to its vast measuring range and rugged design it is suitable for numerous types of application within the field of temperature or humidity monitoring.

This humidity and temperature probe with digital interface is, in combination with the B+B HYTELOG USB or RS232 devices, an efficient measuring and recording system for relative humidity and temperature.

Available in many versions for use in cooling, heating, beverage machines, vending machines, household appliances, instrument technology, etc. In metal and plastic cases. With device socket, plug connection, wiring, encapsulated probes. With double NTC/PTC, with analogue signal output

Mineral insulated thermocouples are thermo wires compressed in fire resistant magnesium oxide which ensures a high pressure resistance. Thermocouples type K are suited for the range -200…+1100 °C. The shock resistant construction assures a long life span.

Mineral insulated thermocouples are thermo wires compressed in fire resistant magnesium oxide which ensures a high pressure resistance. Thermocouples type K are suited for the range -200…+1100 °C. The shock resistant construction assures a long life span.

Mineral insulated thermocouples are thermo wires compressed in fire resistant magnesium oxide which ensures a high pressure resistance. Thermocouples type K are suited for the range -200…+1100 °C. The shock resistant construction assures a long life span.

Mineral insulated thermocouples are thermo wires compressed in fire resistant magnesium oxide which ensures a high pressure resistance. Thermocouples type K are suited for the range -200…+1100 °C. The shock resistant construction assures a long life span.

In housing fused Molex Minifit-plug, 4-pole; Pin assignment NTC1: Pin 1+3, NTC2: Pin 2+4