Results for
EGE-ELEKTRONIK SPEZIAL-SENSOREN GMBH
Germany
—hydrostatic immersion probe for continuous level measurement up to 20 meters with analog output. —measuring probe is inserted from the top, the cable can be led along the tank wall —for high tanks with agitators —suitable for adhesive, contaminated and highly viscous media —independent of foam formation and media movement —for continuous level measurement
Request for a quoteDRIESEN + KERN GMBH
Germany
Selection of probes based on Pt100/Pt1000, thermistors or thermocouples Platinum Temperature Sensor (Pt100/Pt1000) Platinum measuring resistors incorporate a Pt100 or Pt1000 sensor with 1/3 DIN accuracy. They are available in two-wire and also four-wire technique when power resistance needs to be compensated for. Platinum sensors can operate within the range of -50°C...+400°C while still maintaining high accuracy and long-term stability. Thermocouples Thermocouples are suitable for a broad temperature range between -25°C and +1100°C. They feature a fast response time and can be used for applications in hard to reach spaces or for rough, industrial applications. Thermistors Thermistors are sensors based on metal oxide semiconductors which produce a much larger change in signal when temperatur changes occur. Their operating range is -50°C...+150°C. They come in miniaturized design, helping their fast response time. Due to the thermistor's high resistance the effect of power...
Request for a quoteDRIESEN + KERN GMBH
Germany
Sensors for Water Quality Parameters pH/Temperature pH-Sense330 Conductivity/Temperature µS-Sense340 O2 Saturation/Temperature O2-Sense350 The Sense300 Series by Driesen+Kern GmbH consists of three models for different water quality parameters. Each sensor model also measures temperature thus ensuring precise and temperature compensated readings. Electronic circuits are entirely integrated into the stainless steel housing making it compact and entirely submersible. Of course, it can also be installed in the process assembly. The user himself can perform calibration and exchange the electrode on each model. Devices are available with analog, digital and switching output. Analog outputs are 0-1V/0-10V or 4..20mA in thre-wire or as 4-20mA current loop. Optionally, the sensors can be fitted with a relay output whose switching value will be factory-set, but can later be changed with the programming kit.
Request for a quoteDRIESEN + KERN GMBH
Germany
The HMW90 Series Humidity and Temperature Transmitters are designed for demanding HVAC applications, where high accuracy, stability, and reliable operation are required. The flexible HMW90 series offers a variety of options and features. Transmitters include a display and a sliding cover with either an opening for the display or a solid front. Both analog and digital output options, including special scalings and calculated parameters, are available.
Request for a quoteDRIESEN + KERN GMBH
Germany
Vaisala INTERCAP® Humidity and Temperature Transmitter Series HMDW80 measure relative humidity and temperature in various building automation applications. Transmitters combine easy installation and reliable operation with a low requirement for maintenance. The versatile HMDW80 series includes transmitters for wall and duct mounting, IP65-classified transmitters for humid areas, and transmitters with a radiation shield for outdoor use. It also includes temperature-only transmitters and transmitters with an optional display. Calculated humidity parameters – dew point temperature, wet bulb temperature, and enthalpy – are also available.
Request for a quoteDRIESEN + KERN GMBH
Germany
The Vaisala HUMICAP® Humidity and Temperature Transmitter Series HMT360 is the ideal solution for measuring humidity in hazardous areas. The HMT360 transmitters' proven performance and technology conform with rigorous international standards. The transmitters operate safely and reliably even in the most hazardous classifications. Intrinsically Safe The HMT360 transducer can be installed in areas pemanently classified as exposed to explosion hazards. This includes flammable gases as well as combustible dust. Customer-specific Configuration Microprocessor controlled electronics and a broad range of options make the HMT360 series very flexible. When ordering, the customer can customize the product according to their specific application and requirements.
Request for a quoteDRIESEN + KERN GMBH
Germany
Low-Cost Humidity and Temperature Probe DKRF4050/DKRF4060 With the DKRF4050 and DKRF4060 Driesen+Kern GmbH well-priced instrument for humidity and temperature. With its G3/8” connection thread the compact cable probe (d=24.5mm, l=46mm) can easily be installed in plants and facilities. Alternatively, an extension for the probe is available with which the probe can be attached to a compression fitting. Two models are available: The DKRF4050 with 2 linear analogie outputs 0...1V/0...5V or 0...10V and the DKRF4060 with a CMOS-UART interface.
Request for a quoteDRIESEN + KERN GMBH
Germany
The DKRF417 humidity and temperature transducer ist the best choice for measurements at very high pressure levels. It is pressure-resistant up to 30 bar. Thanks to its small dimensions and M8 thread it is very well suited for applications within compressed air lines with small diameter. The probe’s operating range is 0...100% RH and it tolerates temporary condensation. It delivers highly accurate readings of up to 1.8%RH / 0.3°C. The DKRF417 humidity/temperature probe provides reliable readings even in challenging environmental conditions: · Compressed Air Systems · Engine Test Benches · Industrial Automation Technology We offer the compact, pressure-resistant transducer DKRF417 for relative humidity and temperature as well as the pressure-resistant humidity sensor EXT-D of the DKRF470 Series and the humidity and temperature Probe DKRF400.
Request for a quoteDRIESEN + KERN GMBH
Germany
Micro Sensor for Humidity and Temperature The Micro Sensor DKRF410 is available as one of two models which are especially suitable for humidity and temperature measurements in areas difficult to access such as insulation, concrete walls, floor screed, product and packaging tests. The DKRF410 probe has a range of 0...100% RH and offers an accuracy of up to 2% RH. At the same time temperature measurements with a range of -40...+80°C can be undertaken. Two separate analogue outputs each provide a linear signal f 0...1V / 0...5V or 0...10V. A passive output signal for temperature (PT100) can also be provided. If you require a 4-20 mA output signal the DKRF 473 industrial transmitter can be used with the -XS and -XXS probe. The DKRF410 is also available with digital outputs (RS232, USB, RS485).
Request for a quoteDRIESEN + KERN GMBH
Germany
The DKRF420 is a transducer for humidity and temperature designed for flush-mounted boxes. Their benefits become evident when used in museums and historic buildings or in pharmaceutical and medical laboratories. The transducer’s electronic components completely immerse into the flush-mounted box (required mounting depth: 30 mm). It is covered by a mounting plate and can be plastered leaving only the small stainless steel probe (d=8 mm, l=20 mm) stick out of the wall.
Request for a quoteDRIESEN + KERN GMBH
Germany
The Driesen + Kern GmbH DKRF425 probe series for flush-mounting is designed for controls and automation such as in HVAC. The sensors measure tempeature, humidity, CO2 concentration and light intensity. They fit into standard flush-mounted boxes and are compatible to switch product ranges of several manufacturers. This makes them well suited for integration in existing building concepts.
Request for a quoteDRIESEN + KERN GMBH
Germany
Applications The humidity/temperature probe DKRF400-RSxxx can be easily connected to existing devices and facilities, e. g. to an RS232 input. The output provides a standard ASCII stream with basic protocols which can be controlled through the Windows terminal. The RS485 model can be used to build a network of up to 255 probes and offers several operating odes (polling/streaming etc.).
Request for a quoteDRIESEN + KERN GMBH
Germany
Reasonably Priced and Precise The humidity / temperature probe DKRF400 was designed for applications where cost-efficient, flexible solutions and high accuracy are essential. The probe can operate within a range of 0...100%RH and offers an accuracy of +/-1.8%RH between 20...80%RH. Even in rough conditions beyond this range it provides accurate readings (see data sheet). Regardin temperature, the probe's accuracy is +/-0.3°C at 25°C. Two separate analog outputs each provide a linear signal of 0..1/0..5/0..10VDC or 4..20mA with an optional module. Miniaturized Design The DKRF400 probe distinguishes itself through its miniaturized and robust design. Its small dimensions (d=8mm, l=100mm) permit its use in a variety of applications The housing is made of stainless steel and can be equipped with cables of different sizes. Low Maintenance The probe features the miniaturized sensor SHT75DK which can be delivered as a fully calibrated spare part. The plug-in sensor can be exchanged...
Request for a quoteDRIESEN + KERN GMBH
Germany
The DKRF415 humidity/temperature probe was specifically designed to work in areas with elevated pressure levels and in vacuum. The probe's operating range is 0...100% RH and it tolerates temporary condensation. It delivers accurate readings (up to +/-1.8RH / +/-0.3°C) even when working in compressed air up to 2 bar.
Request for a quoteDRIESEN + KERN GMBH
Germany
The DKRF470 Series of transducers was designed for sophisticated measurement applications (humidity and temperature) such as in process automation, HVAC in public swimming pools or greenhouses. Based on the latest capacitive sensor technology by Sensirion (CMOSens) the devices provide a precise yet affordable solution for a variety of potential measuring tasks. They are extremely resitant to dust as well as most chemicals and provide high accuracy and reliability (+/-1.8%RH / +/-0.3°C). The sensor head is available as a spare part with or without a certificate of calibration which allows you to change it on-site.
Request for a quoteDRIESEN + KERN GMBH
Germany
The DKRF670 Series by Driesen + Kern GmbH was developed for measuring humidity related parameters especially in industrial applications. All models have a relative humidity measuring range of 0...100%RH and can also measure temperature. Calculated variables such as absolute humidity (g/m3), dew point (°C), mixing ratio (g/kg) are optionally available. The series' measurements are very accurate for humidity (up to +/-1.8%RH) as well as temperature (up to +/-0.1K). An ISO9001 traceable certificate is included in delivery. Three analog output signals are provided for a customer-specific combination of the chosen parameters (relative humidity, temperature, absolute humidity, mixing ratio, dew point). Analog signals can be 0..1/0..5/0..10VDC, and also 4..20mA three-wire. The transducer's electronic circuits are integrated in a robust aluminium housing that is protected against dust and splash water according to protection class IP65, which makes the devices well suited for use in wet...
Request for a quoteDRIESEN + KERN GMBH
Germany
The Vaisala HUMICAP® Humidity and Temperature Transmitter Series HMT330 is designed for demanding industrial applications where stable measurements and extensive customization are essential. With multiple optionsto choose from, the instrument can be tailored to meet the specific needs of each individual application.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
DRIESEN + KERN GMBH
Germany
The DKRF300 and DKRF300-0835 probes are based on the combined humidity and temperature Sensor SHT75 by Sensirion. Their filter protects the sensor against splash water and dust. Being of robust design the stainless steel probe body offers additional protection. This humidity/temperature sensor provides the digital two-wire signal by Sensirion (see SHT75DK data sheet for further information).
Request for a quoteResults for
Probes - Import exportNumber of results
19 ProductsCountries
Company type
Category