Open frame - Import export

✓ Ultra wide input range 6...36VDC ✓ Selectable output voltage +12V, +19V or +24V ✓ Very compact design 132mm x 56mm x 17mm ✓ Full performance in the extended temperature range of -20°...+60°C ✓ Very high efficiency up to 98% ✓ More than 10 years capacitor lifetime ✓ Optional output voltage compensation via sense lines ✓ Optional Remote On/Off ✓ Incl. thermal pad, jumper and distance bolts ✓ Made in Germany With 98% efficiency and 300W output power the powerful open frame DC/DC converter offers an ultra-wide 6-36 V input as well as three selectable output voltages 12V / 19V / 24 V, so that almost any corresponding single-voltage motherboard or computer system can be supplied. The very compact DC converter “Made in Germany” delivers fanless full power in the extended temperature range of -20°…+60°C and up to an operating altitude of 5000m.

Additional information•Output voltage: 24 V •Protection Class: I •Current: 18750 mA •Spec.0 cover sheet FW-Type: OF450-24 •Input voltage: 100-240 V •MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic ) h •Input tolerance: +10% / -10% •Storage temperature : -40°C - 70°C •Input current: 5500 mA •Working temperature: 0°C - 70°C •Humidity: 5% to 95% •Frequency: 50 / 60 Hz •AC Input: Screw Terminal •DC output: Screw Terminal •Family : OF450 •Output voltage tolerance: +2% / -2% •Means of Protection: Input Output 2xMOPP, Input - Ground 1xMOPP •Output voltage 2: 5 V •current 2: 100 mA •Standard: IEC60601-1, IEC62368-1

Open frame solenoid as thrust type solenoid with conical face armature. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request.

Open frame linear solenoid as a thrust type solenoid. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request.

Open frame solenoid as pull type solenoid with conical face armature. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. More information can be found in the download area.

Open frame solenoid as a combi type solenoid with integrated return spring. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. More information can be found in the download area.

Open frame solenoid as pull type solenoid with conical face armature. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. More information can be found in the download area.

Bistable linear solenoid with permanent magnetic support in open frame technology. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request.

Bistable linear solenoid with permanent magnetic support in open frame technology. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. More information can be found in the download area.

The Weber Slicer 905 combines innovative slicing technology with versatility, efficiency and ease of operation. The extremely wide cutting throat and blade speeds of up to 2000 rpm allows the industry’s highest throughputs. The improved product control system provides perfect slicing results. Delicate and odd shaped products are easily loaded and sliced. The open frame design of the 905 allows easy access for operation, maintenance, and cleaning functions. The product control system has been upgraded to allow for more hygienic operation and quicker disassembly for cleaning. The Weber 905 has been designed and constructed to meet the world’s highest sanitation standards. The modular design allows the Weber 905 to be used in conjunction with all Weber up and down stream accessories such as stacking, party tray, automatic infeeding unit, etc.

PurMop BLACK® C1 is a unique cleanroom mopping system, offering maximum performance and unparalleled user experience. Its telescopic handle and frame are made from carbon fiber reinforced plastic (CFRP), making it ultra light. The complete C1 system weighs only 650 g, arguably making it the most ergonomic cleanroom mop available on the market. Length adjustment can be performed using one hand only, at the push of a button either at the top or middle of the handle. A newly developed frame centring function facilitates safe overhead cleaning by preventing the frame from folding unwantedly. A further intelligent feature is the mop discarding mechanism, allowing the frame to be opened and the mop to be dropped at the simple push of a button – anywhere and without the need for a trolley. C1 is available in two color options, correlating to the color coding of the new PurMop BLACK® mops – orange for sterile models and green for non-sterile models.

The uniform, high-quality appearance of this triangular stand is ensured by the silver anodised click frames and the silver anodised aluminium round tubes. The simple assembly is done by screwing the 3 click frames to the 3 stable ø 60 mm aluminium legs. In order to effectively protect the inserted posters from rainwater, a circumferential sealing rubber is mounted on the weather-resistant metal rear walls, in addition the cover foil is glued to the rear wall on a short side. The cover foils used are made of non-reflecting, UV-stabilised material to prevent the posters from fading. Furthermore, the anti-reflection coating of the films ensures that the inserts are much easier to read even in sunlight. The posters can be changed quickly by opening the click frame profiles at the front. The highlight of this display is that the complete rear wall with foil can be removed for even easier poster changing.

With the LED WindSign "Seal Lite" you will attract the attention of customers and your advertising message, especially in dark weather. The powerful battery has a runtime of 16 hours in ecomode. At 100%, a running time of 8 hours is achieved. The pavement display is designed for permanent outdoor use. It is equipped with a fillable plastic base and can be used in highly frequented areas, such as pedestrian zones or walkways. Due to a special spring technology, it is perfectly suited for use in windy locations. The poster can be changed using the folding technology built into the frame. By simply opening the profiles, the protective foil is removed and the insert is exchanged. Thanks to the wheels integrated in the base, the LED WindSign "Seal Lite" can be moved flexibly and moved to the desired location.

Use the double-sided illuminated frame "Simple" to light-up two posters. The double-sided "Simple" illuminated frame is supplied with power via a 3.5 metre long cable. The frame is switched on and off via the power supply unit. Hang your impressive backlit advertising in portrait or landscape format from the ceiling. The supplied wire suspension helps you to do this. A PET film protects your print insert from environmental influences. A simple media change is possible by loosening the silver clamping profiles. Simply open the frame profiles and quickly deliver a new advertising message. You present advertising posters in the right light. The LED light frame "Simple" can be used in a wide range of applications. The illuminated frame makes your pictures shine, especially in low-lit salesrooms, airport terminals and shopping centres.

The industrial system Ti3000 will get more than 1.5% more yield as compared to other systems at the tried and tested FESSMANN quality! Completely made of stainless steel and built steamtight out of panels, the Ti3000 is universally usable according to your specific needs. The central unit technology also convinces with its flexibility and best circulation air outputs at short process times.Panel construction and central unit technology for best air and process outputs Higher flexibility in implementation of customerspecific product requirements by smooth fan speeds Higher system capacities by faster process times = higher yield Use of all known supply trolleys for industrial use possible Use of "overlength" supply trolleys and transport frames Automatic door opener serially included Automatic CIP cleaning system serially included

The pavement WindSign "QS I" was technically updated and is now available as pavement WindSign "Seal". The stronger cover foil is fixed with screws on the top profile and cannot slip down anymore. The covers can still be exchanged if necessary. Two sticky pads are implemented in the upper part of the frame. Those make sure that your posters will be held in place during installation. Of course the pads are reusable. The optimised poster stand comes in new visual appearance. All pavement signs are made with a sturdy back-wall and 2 non-glare, UV stabilised front covers. The new sealant makes the display waterproof. The base can be filled with either water or sand and is movable on 2 wheels when tilted. The strong springs allow for the highest grade of stability even in “stormy” weather conditions. Posters can be exchanged quickly by opening the aluminium click frame profiles. The header board is inserted into the upper groove of the pavement sign and fixed with screws.

The open frame XY stages KT are especially designed to provide high accuracy in compact dimensions. By the modular concept, they can be equipped with different motors and measuring systems. The open frame XY stages are particularly suitable for transmitted light applications. normalized aluminium alloy, black anodized cross roller guides, anti-backlash pre-loaded when equipped with motorized drives, anti-backlash pre-loaded ball screws are used when hand driven, with quick-release for coarse adjustment and +/- 5 mm fine-pitch thread plane parallel glass top to put on the specimen

Open weld heads are clamped on one side of the weld joint. During welding, the gas- or water-cooled torch with hose package rotates around the tube. Advantages of open weld heads: — Robust design — Extremely easy to use — Option of using additional wire — Stepless tube size range — Torch bracket has 90° tilting function Weld head \ Tube size range mm \ inch \ weight \ item number OSW 40 \ OD 8 - 40mm \ 0.394" - 1.575" \ 2kg \ 1.3.1001 OSW 80 \ OD 10 - 76.2mm \ 0.394" - 3.000" \ 3kg \ 1.3.1101 OSW 115 \ OD 20 - 114.3mm \ 0.787" - 4.500" \ 4.5kg \ 1.3.1201 OSW 170 \ OD 40 - 168.3mm \ 1.575" - 6.626" \ 6.5kg \ 1.3.1301 OSW 275 \ OD 88.9 - 273mm \ 3.500" - 10.748" \ 16kg \ 1.3.1401 \ rotor can be decoupled Package includes: — Weld head — Integrated start/stop button on the handle — Top jaw — OSW torch bracket (with roll scanning in the case of OSW 275) — Mechanical headway control Optional: Angular gearbox for OSW on request

Flex-Turn® curved systems offer a hygienic solution for product transport without changing alignment or spacing. They minimise the risk of product damage and are ideal for sensitive goods, especially in the food industry. Hygiene and protection: . easy to clean: Open stainless steel frame (600 series) and solid polythene surfaces (700 and 800 series). . Robust materials: Made of stainless steel and UHMW-PE for intensive cleaning. Advantages: . Gentle handling: Reduces product damage. . Consistent alignment: Products retain their position and spacing. . Compact design: Ideal for tight production spaces. . High-quality construction: Adjustable height, lockable castors. . Flexible speeds: Up to 11 m/minute. Flex-Turn® curve conveyors are available in various sizes, radii and configurations to suit almost any application.

High end multitouch table on rollable steel frame with PC holder and professional open frame display, up to 80 touch points and certified for horizontal 24/7 use, optical object recognition.

This cordless clinching device is a low-cost and universal frame from the ECKOLD range of hand-held machines. Apart from the standard models, we offer of course also customised frames. Do you want to produce a prototype? Do you need a fall-back option for your production? Or are there clinching tasks to be performed on site? Then opt for the MCD 30/50 AH portable clinching frame. • Universal application • Portable and cordless • Sturdy design, suitable for construction side • Large opening width, good component accessibility • Frame head 360° turnable • Continuously adjustable path limit • Different clinching techniques possible • Comfortably packed in transportation case • LED light • Digital display • Klauke i-press software Clinching tools (punch and die) are not included in the scope of delivery. They must be chosen separately, based on the actual joining task. Contact us for a customised offer, tools included!

Universal input 100 to 240 V AC, constant voltage, current limited, low standby power, High efficiency, continuously short circuit proof, Leakage current ≤ 100 μA, small package, without active fan. Additional information •Protection Class: I •MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic ) h •Input voltage: 100-240 V •Storage temperature : -40°C - 70°C •Input tolerance: +10% / -10% •Working temperature: 0°C - 80°C •Humidity: 5% to 95% •Standard: IEC60601-1 •Frequency: 50 / 60 Hz •Family : OF65 •AC Input: flat pin connector •Output voltage tolerance: +2% / -2%

Additional information•current 2: 5000 mA •Output voltage 2: 5 V •Means of Protection: Input Output 2xMOPP, Input - Ground 1xMOPP •Output voltage tolerance: +2% / -2% •Family : OF250 •AC Input: flat pin connector •Frequency: 50 / 60 Hz •Standard: IEC60601-1, EN61558 •Unit: OF •Humidity: 5% to 95% •Working temperature: 0°C - 60°C •Storage temperature : -40°C - 70°C •Input tolerance: +10% / -10% •MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic ) h •Input voltage: 100-240 V •Spec.0 cover sheet FW-Type: OF250-24 •DC output: flat pin connector •Current: 10500 mA •Protection Class: II •Output voltage: 24 V