Open frame - Import export

✓ Ultra wide input range 6...36VDC ✓ Selectable output voltage +12V, +19V or +24V ✓ Very compact design 132mm x 56mm x 17mm ✓ Full performance in the extended temperature range of -20°...+60°C ✓ Very high efficiency up to 98% ✓ More than 10 years capacitor lifetime ✓ Optional output voltage compensation via sense lines ✓ Optional Remote On/Off ✓ Incl. thermal pad, jumper and distance bolts ✓ Made in Germany With 98% efficiency and 300W output power the powerful open frame DC/DC converter offers an ultra-wide 6-36 V input as well as three selectable output voltages 12V / 19V / 24 V, so that almost any corresponding single-voltage motherboard or computer system can be supplied. The very compact DC converter “Made in Germany” delivers fanless full power in the extended temperature range of -20°…+60°C and up to an operating altitude of 5000m.

Specifications voltage: 1 x 12V current: 1 x 200mA rated power: 2.4VA weight: 115g dimensions

Specifications voltage: 1 x 12V current: 1 x 2000mA rated power: 24VA weight: 820g dimensions

Additional information•Output voltage: 24 V •Protection Class: I •Current: 18750 mA •Spec.0 cover sheet FW-Type: OF450-24 •Input voltage: 100-240 V •MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic ) h •Input tolerance: +10% / -10% •Storage temperature : -40°C - 70°C •Input current: 5500 mA •Working temperature: 0°C - 70°C •Humidity: 5% to 95% •Frequency: 50 / 60 Hz •AC Input: Screw Terminal •DC output: Screw Terminal •Family : OF450 •Output voltage tolerance: +2% / -2% •Means of Protection: Input Output 2xMOPP, Input - Ground 1xMOPP •Output voltage 2: 5 V •current 2: 100 mA •Standard: IEC60601-1, IEC62368-1

A hinged 16 mm Groove system that optimizes labour and saves on the installation time of each window making it possible to fit the sash and frame opening kits in only 5 minutes.

Door for technical ducts - White lacquered RAL 9016. - Non-detachable leaf - Left or right hand installation - Leaf with fire protection SOFTLINE 60 minutes fire resistant inspection hatches are specially designed to be integrated into the walls of technical ducts with a minimum thickness of 25 mm and meet the requirements of fire resistance class EI 60. They provide protection or an obstacle to the spread of fire from a room into the duct. The metal surface of the powder-coated frame hides the opening in the wall, providing a harmonious appearance. The lockable square key lock prevents opening by unauthorized persons. CSTB certified, PV No. RS-19-067. Customized dimensions on request within the maximum dimension allowed by the PV. Sizes: 2 plates of 12.5mm - Certificate EI 60 200x200 300x300 400x400 500x500 600x600

Open frame solenoid as thrust type solenoid with conical face armature. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request.

Open frame linear solenoid as a thrust type solenoid. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request.

Open frame solenoid as pull type solenoid with conical face armature. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. More information can be found in the download area.

Open frame solenoid as pull type solenoid with conical face armature. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. More information can be found in the download area.

Open frame solenoid as a combi type solenoid with integrated return spring. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. More information can be found in the download area.

Bistable linear solenoid with permanent magnetic support in open frame technology. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request.

Bistable linear solenoid with permanent magnetic support in open frame technology. Our preferred types are available in small quantities from stock. Other versions or other voltages are available on request. More information can be found in the download area.

The Weber Slicer 905 combines innovative slicing technology with versatility, efficiency and ease of operation. The extremely wide cutting throat and blade speeds of up to 2000 rpm allows the industry’s highest throughputs. The improved product control system provides perfect slicing results. Delicate and odd shaped products are easily loaded and sliced. The open frame design of the 905 allows easy access for operation, maintenance, and cleaning functions. The product control system has been upgraded to allow for more hygienic operation and quicker disassembly for cleaning. The Weber 905 has been designed and constructed to meet the world’s highest sanitation standards. The modular design allows the Weber 905 to be used in conjunction with all Weber up and down stream accessories such as stacking, party tray, automatic infeeding unit, etc.

PurMop BLACK® C1 is a unique cleanroom mopping system, offering maximum performance and unparalleled user experience. Its telescopic handle and frame are made from carbon fiber reinforced plastic (CFRP), making it ultra light. The complete C1 system weighs only 650 g, arguably making it the most ergonomic cleanroom mop available on the market. Length adjustment can be performed using one hand only, at the push of a button either at the top or middle of the handle. A newly developed frame centring function facilitates safe overhead cleaning by preventing the frame from folding unwantedly. A further intelligent feature is the mop discarding mechanism, allowing the frame to be opened and the mop to be dropped at the simple push of a button – anywhere and without the need for a trolley. C1 is available in two color options, correlating to the color coding of the new PurMop BLACK® mops – orange for sterile models and green for non-sterile models.

With the LED WindSign "Seal Lite" you will attract the attention of customers and your advertising message, especially in dark weather. The powerful battery has a runtime of 16 hours in ecomode. At 100%, a running time of 8 hours is achieved. The pavement display is designed for permanent outdoor use. It is equipped with a fillable plastic base and can be used in highly frequented areas, such as pedestrian zones or walkways. Due to a special spring technology, it is perfectly suited for use in windy locations. The poster can be changed using the folding technology built into the frame. By simply opening the profiles, the protective foil is removed and the insert is exchanged. Thanks to the wheels integrated in the base, the LED WindSign "Seal Lite" can be moved flexibly and moved to the desired location.

The uniform, high-quality appearance of this triangular stand is ensured by the silver anodised click frames and the silver anodised aluminium round tubes. The simple assembly is done by screwing the 3 click frames to the 3 stable ø 60 mm aluminium legs. In order to effectively protect the inserted posters from rainwater, a circumferential sealing rubber is mounted on the weather-resistant metal rear walls, in addition the cover foil is glued to the rear wall on a short side. The cover foils used are made of non-reflecting, UV-stabilised material to prevent the posters from fading. Furthermore, the anti-reflection coating of the films ensures that the inserts are much easier to read even in sunlight. The posters can be changed quickly by opening the click frame profiles at the front. The highlight of this display is that the complete rear wall with foil can be removed for even easier poster changing.

The industrial system Ti3000 will get more than 1.5% more yield as compared to other systems at the tried and tested FESSMANN quality! Completely made of stainless steel and built steamtight out of panels, the Ti3000 is universally usable according to your specific needs. The central unit technology also convinces with its flexibility and best circulation air outputs at short process times.Panel construction and central unit technology for best air and process outputs Higher flexibility in implementation of customerspecific product requirements by smooth fan speeds Higher system capacities by faster process times = higher yield Use of all known supply trolleys for industrial use possible Use of "overlength" supply trolleys and transport frames Automatic door opener serially included Automatic CIP cleaning system serially included

The pavement WindSign "QS I" was technically updated and is now available as pavement WindSign "Seal". The stronger cover foil is fixed with screws on the top profile and cannot slip down anymore. The covers can still be exchanged if necessary. Two sticky pads are implemented in the upper part of the frame. Those make sure that your posters will be held in place during installation. Of course the pads are reusable. The optimised poster stand comes in new visual appearance. All pavement signs are made with a sturdy back-wall and 2 non-glare, UV stabilised front covers. The new sealant makes the display waterproof. The base can be filled with either water or sand and is movable on 2 wheels when tilted. The strong springs allow for the highest grade of stability even in “stormy” weather conditions. Posters can be exchanged quickly by opening the aluminium click frame profiles. The header board is inserted into the upper groove of the pavement sign and fixed with screws.

The open frame XY stages KT are especially designed to provide high accuracy in compact dimensions. By the modular concept, they can be equipped with different motors and measuring systems. The open frame XY stages are particularly suitable for transmitted light applications. normalized aluminium alloy, black anodized cross roller guides, anti-backlash pre-loaded when equipped with motorized drives, anti-backlash pre-loaded ball screws are used when hand driven, with quick-release for coarse adjustment and +/- 5 mm fine-pitch thread plane parallel glass top to put on the specimen

Load-out systems with shuttle conveyor maximizes scrap removal. The PRAB shuttle conveyor load-out systems automate final load-out of stamping scrap, die scrap and machining scrap into large trailers or railcars to maximum container fill. Open frame construction provides personnel quick and safe access to carry over. This scrap material conveyor features a traversing, bidirectional steel belt designed for final load-out of stamping and die scrap, as well as chip processing, into large trailers or railcars. The infeed conveyor and continuous back and forth operation provide even distribution into larger scrap containers where swivel chute systems would be inadequate

We provide a wide range of precise high valuable accuracy classified linear stages, open or closed frame XY stages, micropositioning elements and rotary or lift tables. Closed loop operation is supported by using optional steel or glas linear scales or rotary encoders. Standard stands in grey iron cast or granite are available additionally. The positioning systems can be driven by high resolution 1-, 2- or 3-axis motion controllers with joystick and RS232/USB/LAN interface.

They are decorative door panels with PVC and aluminum plate options with sharp lines opened with CNC and frames designed with stainless INOX lath. They are panel doors that are stylishly designed with stainless INOX laths and that you can easily use outdoors thanks to their UV resistance. It adds elegance to your living spaces with PVC, laminated and aluminum options as surface options. We can easily produce your special orders with frosted, sandy, satin, laminated or mirror glass preferences.

Manual telescopic system Easy opening mechanism Aluminium frame Fabrics, prints and finishes Polyester fabric 200-240 gr/m² Flat screen print / Digital / Serigraph High UV fastness Water-repellent Water-proof Double Roof as optional High UV fastness | Water-repellent | Water-proof Parasol Pipe Color Options : White (RAL 9016) Aluminum | Black (RAL 9005) Aluminum | Wood Look Aluminum | Silver Anodized Aluminum

As a manufacturer of metal chair frames, we are open to cooperation with companies, designers and interior designers. We are happy to take up challenges and implement custom-made projects that are unique and demanding. Our experience and skills allow us to create racks of various shapes and sizes that are not only functional, but also aesthetic. To sum up, as a manufacturer of metal chair frames, we focus on the quality, precision and durability of our products. Thanks to advanced technology and experience in production, we are able to meet the needs of even the most demanding customers. We invite you to familiarize yourself with our offer of metal chair frames and to use our services. We are convinced that you will find the highest quality products that will meet your expectations and requirements.

Doorsorba acoustic doors are extremely high performance sound reducing timber doorsets. These high quality doorsets are available in a wide range of finishes and are fire rated. Used in areas which require high sound reduction performance such as theatre, radio/TV studios, music rooms, interview rooms, cinemas, schools and confidential offices. Acoustic Performance Installation DOORSORBA acoustic doorsets are installed in a similar manner as normal timber doors. Doorsets are supplied at a moisture content of 6-12% and should not be brought on site until conditions are suitable. Wet trades should be complete and the building dried out and brought to normal working room temperature. DO NOT build-in or install frames as first-fixings. 1. Check the sizes of the doors, the frames and the openings prior to starting installation. Only skilled tradesmen should undertake installation as correct fitting door/frame is imperative. 2. Frames should be fitted to the supporting construction...

Open weld heads are clamped on one side of the weld joint. During welding, the gas- or water-cooled torch with hose package rotates around the tube. Advantages of open weld heads: — Robust design — Extremely easy to use — Option of using additional wire — Stepless tube size range — Torch bracket has 90° tilting function Weld head \ Tube size range mm \ inch \ weight \ item number OSW 40 \ OD 8 - 40mm \ 0.394" - 1.575" \ 2kg \ 1.3.1001 OSW 80 \ OD 10 - 76.2mm \ 0.394" - 3.000" \ 3kg \ 1.3.1101 OSW 115 \ OD 20 - 114.3mm \ 0.787" - 4.500" \ 4.5kg \ 1.3.1201 OSW 170 \ OD 40 - 168.3mm \ 1.575" - 6.626" \ 6.5kg \ 1.3.1301 OSW 275 \ OD 88.9 - 273mm \ 3.500" - 10.748" \ 16kg \ 1.3.1401 \ rotor can be decoupled Package includes: — Weld head — Integrated start/stop button on the handle — Top jaw — OSW torch bracket (with roll scanning in the case of OSW 275) — Mechanical headway control Optional: Angular gearbox for OSW on request

Flex-Turn® curved systems offer a hygienic solution for product transport without changing alignment or spacing. They minimise the risk of product damage and are ideal for sensitive goods, especially in the food industry. Hygiene and protection: . easy to clean: Open stainless steel frame (600 series) and solid polythene surfaces (700 and 800 series). . Robust materials: Made of stainless steel and UHMW-PE for intensive cleaning. Advantages: . Gentle handling: Reduces product damage. . Consistent alignment: Products retain their position and spacing. . Compact design: Ideal for tight production spaces. . High-quality construction: Adjustable height, lockable castors. . Flexible speeds: Up to 11 m/minute. Flex-Turn® curve conveyors are available in various sizes, radii and configurations to suit almost any application.

Includes a wide range of Open Frame monitors and industrial Touch Monitors for many different applications and markets. Custom monitors and touchscreen monitors are also available, to give you the optimum solution. These Open frame industrial Monitors including ‘chassis’ and panel mount monitors offer great benefits such as; 6.5″ to 84″ available with up to 4K resolution. Long term stability of mechanical design with VGA, DVI, HDMI, Video interfaces Various built in Touchscreen options with RS232 / USB communication optional (for touch) Excellent design to optimise air flow / heat dissipation, and minimal footprint with fine finishing with good looking black powder coated chassis (option) Standard VESA mounting monitors Some larger panels have SMPS (power supply) built in for your ease of design-In. CDS’s Daylight Readable (sunlight readable) Open Frame Monitors are an excellent solution for manufacturers or integrators, looking for a quick and easy installation