Non-permanent - Import export

Flat gripper with a samarium-cobalt magnet in a steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a threaded socket with an internal thread.

Flat gripper with a neodymium magnet in a steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has no hole and is usually glued or pressed in.

Flat gripper with a neodymium magnet in a steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a 8 mm threaded socket with an internal thread. It is characterized by a force of 140 N. The diameter is 20 mm, the total height of the flat gripper is 15 mm.

Flat gripper with a hard ferrite magnet in a steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a 10 mm threaded socket with an internal thread. It is characterized by a force of 125 N. The diameter is 40 mm, the total height is 18 mm.

PMmotors with rotorcage for line start The pmexcited reluctance motors are an alternative to the reluctance motors and can be used in identical applications typical for synchronous motors.

FXE-R electro-permanent lifting magnets that can lift round material or, both round and flat material, we manufacture from our FXE basic models with pole shoes that can lift the customized diameter band widths, individually or in layers. Electro-Permanent Lifting Magnets FXE Electro-Permanent Lifting Magnets from Flaig Magnetsysteme have been setting standards for over 20 years Electro-Permanent Lifting Magnets are the best choice if: the load to be moved is too large for permanent magnets the lifting magnet must be operated and controlled ergonomically the geometry of the load does not fit permanent magnets the lifting magnet must be remote controlled and possibly load adjustable the load capacity is too large in relation to the material thickness for permanent magnets

FXE electro-permanent lifting magnets are equipped with on-board control technology for direct connection to mains voltage - the fast, user-friendly plug & play solution for loads from light to super heavy. Different pole types are available, depending on the material thickness and surface to be moved.

Equipped with pole type 50+ in long narrow design and a maximum load capacity of 400/600/1000 kg, which is achieved with material thicknesses from 15mm, these easy-to-guide and operate devices are recommended for lifting battens, rails, pipes, beams and bars. Also using pole extensions, which make it easier to position the magnets on long narrow bars.

FXE-MH electro-permanent lifting magnets are especially suitable for transporting slabs and blocks. The electro-permanent modules type MH are designed to safely lift large loads with a large air gap. Electro-Permanent Lifting Magnets FXE Electro-Permanent Lifting Magnets from Flaig Magnetsysteme have been setting standards for over 20 years Electro-Permanent Lifting Magnets are the best choice if: the load to be moved is too large for permanent magnets the lifting magnet must be operated and controlled ergonomically the geometry of the load does not fit permanent magnets the lifting magnet must be remote controlled and possibly load adjustable the load capacity is too large in relation to the material thickness for permanent magnets

FXE-M electro-permanent load lifting magnet modules can be combined with MCF control units to form modular load lifting systems. For example, a single FXE-M module with an MCF 1-channel control unit can be used on the crane of a flame-cutting machine, or 4 FXE-M modules, controlled together or individually by an MCF 4-channel control unit, can operate in a fully automatic sectional steel plant. In use on cranes, manipulators, conveyors and robots, FXE-M modules have proven themselves thousands of times over. FXE-M modules are manufactured using monoblock technology and are extremely stable. As with the other products in the FXE series, a choice can be made between different pole types in order to use the appropriate magnet module depending on the load, dimensions and surface.

Flat gripper with a neodymium magnet in a rubber-coated steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a central internal thread.

Flat gripper with a neodymium magnet in a rubber-coated steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a threaded pin with an external thread.

Universal use in warehouses and offices Transparent 160 mµ Foil Full-surface self-adhesive backing Trouble-free exchange of accompanying notes Can be used variably in across and upright format

Flat gripper with a neodymium magnet in a rubber-coated steel pot. The housing increases the adhesive force of the permanent magnet. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The flat gripper has a threaded pin with an external thread.

Rod gripper with a neodymium magnet in a steel housing. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The rod gripper has no thread and is usually glued or pressed in.

Rod gripper with a neodymium magnet in a brass housing. The maximum adhesive force is achieved when the entire surface is placed on a metallic surface. The rod gripper has no thread and is usually glued or pressed in.

In its sensor housing, the combiSENSOR combines two displacement sensors. This unique sensor concept enables one-sided thickness measurement of electrically non-conductive materials on metallic objects. Its field of application is the thickness measurement of plastic film or of plastic coating on metal plates. The eddy current sensor penetrates the plastic layer and measures the distance to a metallic material underneath it, e.g. a metal plate. The capacitive sensor synchronously detects the distance to the plastic material. The thickness is determined based on the difference of both sensor signals.

Features – DC permanent magnet motor – Graphit-copper brushes – Motor housing zinc plated – Ball bearings – Mounting holes to DIN standard 42016 General data – Nominal life 3000 h – Permissible shaft loads (axial): 40 N – Permissible shaft loads (radial): 100 N – Insulations class: DIN VDE 0530, E – Protectin class: DIN VDE 0530, IP 40 – RFI suppression: feasible

The permanent holding magnets achieve a holding force of up to 35,000 N in the de-energized state and are designed for long holding of magnetic workpieces. When the DC-excited coil is switched on, the permanent magnetic field on the holding surface is neutralized and the workpiece to be held can be removed. The electromagnet holds loads even in the event of a power failure and only needs to be energized briefly to release the workpiece. It is characterized by its energy efficiency and high holding forces. The permanent holding solenoids are available in different sizes with forces between 8 and 3,500 N.

Features – DC permanent magnet motor – Graphit-copper brushes – Motor housing zinc plated and chromized – Ball bearings – Mounting holes to DIN standard 42016 General data – Nominal life 3000 h – Permissible shaft loads (axial): 110 N – Permissible shaft loads (radial): 300 N – Insulations class: DIN VDE 0530, E – Protectin class: DIN VDE 0530, IP 40 – RFI suppression: feasible

Features – DC permanent magnet motor – Graphit-copper brushes – Motor housing zinc plated and chromized – Ball bearings – Mounting holes to DIN standard 42016 General data – Nominal life 3000 h – Permissible shaft loads (axial): 40 N – Permissible shaft loads (radial): 100 N – Insulations class: DIN VDE 0530, E – Protectin class: DIN VDE 0530, IP 40 – RFI suppression: feasible

Features – DC permanent magnet motor – Graphit-copper brushes General data – Nominal life 3000 h – RFI suppression: feasible

Features – DC permanent magnet motor – Graphit-copper brushes – Motor housing zinc plated and chromized – Ball bearings – Mounting holes to DIN standard 42016 General data – Nominal life 3000 h – Permissible shaft loads (axial): 40 N – Permissible shaft loads (radial): 100 N – Insulations class: DIN VDE 0530, E – Protectin class: DIN VDE 0530, IP 40 – RFI suppression: feasible

Features – DC permanent magnet motor – Graphit-copper brushes – Motor housing zinc plated and chromized – Ball bearings – Mounting holes to DIN standard 42016 General data – Nominal life 3000 h – Permissible shaft loads (axial): 180 N – Permissible shaft loads (radial): 350 N – Insulations class: DIN VDE 0530, E – Protectin class: DIN VDE 0530, IP 40 – RFI suppression: 2 x L(3 µH)

Features – DC permanent magnet motor – Graphit-copper brushes – Motor housing zinc plated – Ball bearings – Mounting holes to DIN standard 42016 General data – Nominal life 3000 h – Permissible shaft loads (axial): 30 N – Permissible shaft loads (radial): 80 N – Insulations class: DIN VDE 0530, E – Protectin class: DIN VDE 0530, IP 40 – RFI suppression: 2 x L (3,9 µH)

A one-of-a-kind connecting system for premium, museum-quality showcases. FRANK showcases feature prominently in the world’s premier museums, where they protect the most prized objects history has left humankind to preserve. And with good reason: ”It’s what’s inside that counts.” This conviction of ours is reflected in a peerless, purist design that puts the object first, without neglecting function. A FRANK showcase satisfies the most discriminating expectations of great museums across the globe. The FRANK showcase system features our unrivaled slide-in technology. It requires no screws or gaskets for dustproof and airtight storage and preservation. Simply insert the inconspicuous aluminum strips into the grooves machined in the edges of the panels. No wider than the two eight-millimeter panels’ connecting joint, these slim extrusions are flush with the surface when installed.

A one-of-a-kind connecting system for premium, museum-quality showcases. FRANK showcases feature prominently in the world’s premier museums, where they protect the most prized objects history has left humankind to preserve. And with good reason: ”It’s what’s inside that counts.” This conviction of ours is reflected in a peerless, purist design that puts the object first, without neglecting function. A FRANK showcase satisfies the most discriminating expectations of great museums across the globe. The FRANK showcase system features our unrivaled slide-in technology. It requires no screws or gaskets for dustproof and airtight storage and preservation. Simply insert the inconspicuous aluminum strips into the grooves machined in the edges of the panels. No wider than the two eight-millimeter panels’ connecting joint, these slim extrusions are flush with the surface when installed.

A one-of-a-kind connecting system for premium, museum-quality showcases. FRANK showcases feature prominently in the world’s premier museums, where they protect the most prized objects history has left humankind to preserve. And with good reason: ”It’s what’s inside that counts.” This conviction of ours is reflected in a peerless, purist design that puts the object first, without neglecting function. A FRANK showcase satisfies the most discriminating expectations of great museums across the globe. The FRANK showcase system features our unrivaled slide-in technology. It requires no screws or gaskets for dustproof and airtight storage and preservation. Simply insert the inconspicuous aluminum strips into the grooves machined in the edges of the panels. No wider than the two eight-millimeter panels’ connecting joint, these slim extrusions are flush with the surface when installed.

INOX LPG Permanent Valve Protection is a highly effective fuel additive that minimizes wear and tear on the valves and valve seats of LPG-powered engines. This unique product cleans and lubricates the upper area of the combustion chamber and creates a protective layer between the valve and valve seat.