Non-permanent - Import export

FXE-R electro-permanent lifting magnets that can lift round material or, both round and flat material, we manufacture from our FXE basic models with pole shoes that can lift the customized diameter band widths, individually or in layers. Electro-Permanent Lifting Magnets FXE Electro-Permanent Lifting Magnets from Flaig Magnetsysteme have been setting standards for over 20 years Electro-Permanent Lifting Magnets are the best choice if: the load to be moved is too large for permanent magnets the lifting magnet must be operated and controlled ergonomically the geometry of the load does not fit permanent magnets the lifting magnet must be remote controlled and possibly load adjustable the load capacity is too large in relation to the material thickness for permanent magnets

FXE electro-permanent lifting magnets are equipped with on-board control technology for direct connection to mains voltage - the fast, user-friendly plug & play solution for loads from light to super heavy. Different pole types are available, depending on the material thickness and surface to be moved.

Equipped with pole type 50+ in long narrow design and a maximum load capacity of 400/600/1000 kg, which is achieved with material thicknesses from 15mm, these easy-to-guide and operate devices are recommended for lifting battens, rails, pipes, beams and bars. Also using pole extensions, which make it easier to position the magnets on long narrow bars.

FXE-MH electro-permanent lifting magnets are especially suitable for transporting slabs and blocks. The electro-permanent modules type MH are designed to safely lift large loads with a large air gap. Electro-Permanent Lifting Magnets FXE Electro-Permanent Lifting Magnets from Flaig Magnetsysteme have been setting standards for over 20 years Electro-Permanent Lifting Magnets are the best choice if: the load to be moved is too large for permanent magnets the lifting magnet must be operated and controlled ergonomically the geometry of the load does not fit permanent magnets the lifting magnet must be remote controlled and possibly load adjustable the load capacity is too large in relation to the material thickness for permanent magnets

FXE-M electro-permanent load lifting magnet modules can be combined with MCF control units to form modular load lifting systems. For example, a single FXE-M module with an MCF 1-channel control unit can be used on the crane of a flame-cutting machine, or 4 FXE-M modules, controlled together or individually by an MCF 4-channel control unit, can operate in a fully automatic sectional steel plant. In use on cranes, manipulators, conveyors and robots, FXE-M modules have proven themselves thousands of times over. FXE-M modules are manufactured using monoblock technology and are extremely stable. As with the other products in the FXE series, a choice can be made between different pole types in order to use the appropriate magnet module depending on the load, dimensions and surface.

Highlights: Permanent flexibility Lightweight Durable and Eurocode compliant Scalable for permanent flexibility The induflex is available in a large number of configurations and sizes. The structure is highly flexible and can easily be scaled up and down, allowing you to quickly respond to market developments or peaks in production or supply. So, if your requirements change, we can easily adapt your space solution within days. Safety When developing our newest structure, safety was our top priority. In recent years, the weather has become increasingly unstable and unpredictable, and safety regulations for buildings of all types, shapes and sizes have gotten stricter. Our team of engineers was able to further improve the design of the roof system, offering even more support and enabling it to carry even more weight and handle higher wind speeds than any existing common lightweight structure.

Universal joints for steering. The joints are maintenancefree and permanently lubricated.

Pneumatically actuated magnetic gripper type PNEUMAG are pneumatic switchable bi-stable magnetic systems. Air pressure is only needed for switching. The magnet system is permanent and thus keeps safe even with pressure drop. PNEUMAG magnetic grippers enable thin, perforated or textured sheet metal parts (from 0,5mm) take and safe to transport what they recommended specifically for use in automatic and semi-automatic feeding systems as well as slings for robot grippers. PNEUMAG is the alternative to vacuum conveying systems. They were tested on a metal sheet St37 with smooth and clean surface. Note that depending on the application a safety factor of 2 or 3 has to be included.

Super lightweight aluminum body for direct installation of clamping elements. The PMNM UPC pallet is delivered completely ready fitted to fit the Erowa UPC clamping system with original Erowa elements. Optional with handles and/or link Gripper. is used to clamp small and medium-sized workpieces. It works without an external power supply and is activated manually via a changeover lever.

MBX magnetic clamping blocks have opposite clamping sides that are activated when actuated. They are designed to clamp workpieces on steel surfaces such as machine or assembly tables. Several MBX can also be connected together via the internal hexagon of the indexing shaft to clamp longer or larger workpieces.

Permanent Magnetic Circular Chuck Type RNF with neodymium magnet system and low height are used for clamping of small and thin workpieces. Structure: — Neodymium magnet system, steel body, — Max Pole pitch 1,5+0,5mm — Holding power 80N/cm² — Magnetic field height 4mm — Pole plate wearing limit 4mm — Switch travel MAG-ENT-MAG 180° Recommendation: Fine pole circular chuck for small parts

Permanent magnetic chucks type PMNM are high precision plates for clamping small and thin parts for precision grinding and eroding. The low magnetic field height prevents magnetization of processing tools. The chipboard is activated via a removable hex shifter. PMNM palletising clamping plates are available in 3 versions: Structure: — Neodymium magnet system, steel body, — Transverse pole pitch 1.4+0.5 mm — Holding power 100N/cm² — Magnetic field height about 5 mm — Pole plate wearing limit 6 mm Recommendation: High-precision plate for grinding and eroding

FXL magnetic clamping blocks are available in many sizes and designs. They can be manufactured with one or more clamping surfaces and different pole sizes. As with the FXL magnetic clamping plates, they are controlled by an FXL-C control unit; optionally with only one channel or also with several channels in order to be able to control the individual clamping surfaces of a block separately.

Plate-spreading-magnets are used for separating of stacked iron and steel sheets. The sheet separators are laterally grown from the sheet stack, they magnetize the sheets with the same poles, which repel them from each other. Plate-spreading-magnets apply both in automated systems where plates with vacuum or transshipped are magnetic, and the manual work, where the gripping sheet is greatly facilitated by their help. Our Plate-spreading-magnets consist of a reinforced magnet system, which is installed in a stable sheet steel housing.

NMS Precision Sine Tables with built PMNM chipboard impress with very good workmanship and precision. The sine table base is hardened to 60 HRC, burnished and precision ground. The angle is adjusted according the sine principle by using gauge blocks. Our NMS sine tables are used in the EDM, grinding and measuring in the highest precision. Technical Details: — Precision Sine Table with built fine pole chipboard — Holding power 100N/cm2 — Magnetic field height 5mm — Pole plate wearing limit 5mm — plane parallelism 0,005/100mm — Angular accuracy +-0.0013°/+-5sec.

Permanent magnetic chucks type PMNEO-X are super strong compact chucks for heavy cutting. Parts from about 30x15x6mm are stretched with max. achievable holding forces. Good holding forces can be achieved even on rough surfaces. The chipboard is activated via a removable hex shifter. Structure: — Double neodymium magnet system, steel body — transverse pole pitch 11+4mm — Holding power 150 N / cm2 — Magnetic field height 10mm — Pole plate wearing limit 6mm Recommendation: Super Strong chuck for milling

FXL magnetic chucks with pole type 70 are used to securely clamp workpieces from approx. 150x150mm with material thickness from approx. 15mm. Poles of size 70x70mm generate a magnetic field that penetrates approx. 18mm into the workpiece, which is why they are particularly suitable for larger workpieces. Very good air gap behavior also allows uneven workpieces to be clamped securely. In addition, pole extensions with a larger stroke can be used on 70 poles for height compensation. The nominal holding force is a super strong 160 N/cm2 = 7.8kN per pole.

FXL-RR magnetic chucks are especially suitable for the rotationally symmetrical machining of rings, sleeves and flanges. The radial pole pitch ensures uniform clamping over the entire contact area and additional mechanical positioning and clamping aids can be inserted into the T-slots in the poles. The T-slots provide the further option of also using mobile or fixed pole extensions to free the workpiece or to clamp it without pull-down.

Permanent magnetic chucks type PMNEO are super strong, compact plates for heavy cutting. Parts from about 30x15x6mm can be stretched with max. achievable holding forces. Good holding forces can be achieved even on rough surfaces. Optional pole blocks can be built on the PMNEO. This allows turning up the workpiece so that all sides are freely accessible, can be drilled on the magnetic clamping plate and leaves more space for accumulating chips around the component. This allows long-running HSC milling-pieces never sink into the resulting chips. The chipboard is activated via a removable hex shifter. The PMNEO magnetic clamping plate, in 48mm height, is prepared to integrate reference elements directly into the magnetic chuck, so that no additional spectrum is required underneath the magnet.

FXL Magnetic Clamping TechnologyThe FXL square pole technology is the result of over 20 years of experience in magnetic clamping technology and combines solutions to the most common customer requirements in the highest quality design. Magnetic poles, fed by Alnico and NDFeB magnets, are anchored in a solid, super-stiff monobloc body by means of a tool steel insert with M8 internal thread. The back of the clamping plate remains flat and can be drilled in at all points - for example, for inserting a zero-point clamping system. For this purpose, the magnet system is coated with highperformance resin in a multi-stage process, which has a high mechanical strength and ensures absolute tightness and perfect electrical insulation. FXL magnetic clamping plates can be controlled with our FXL-C control units or with almost all control units from other leading manufacturers.

Permanent Magnetic Circular Chuck Type RM, with reinforced ceramic magnet system can be used for clamping bulky and heavy workpieces. The magnetic force is infinitely variable, in the surface incorporated centering grooves facilitate alignment of the workpiece. In the rake face, a center hole can be introduced. Structure: — Ceramic magnet system, Aluminum body, — Max Pole pitch 5+8mm — Holding power 140N/cm² — Magnetic field height 8mm — Pole plate wearing limit 8mm — Switch travel MAG-ENT-MAG 500° Recommendation: Super Strong circular chuck for turning, also for rough parts

FXL-R round magnetic chucks in square pole technology are especially suitable for use on the lathe and on rotary tables of machining centers. The frame construction of the FXL plate can be equipped with centering elements at the front on the clamping side as well as at the rear. All FXL magnetic chucks can be operated with FXL-C or FXL-CT control units.

FXE-TP electro-permanent lifting magnets are ideally suited for beams and profiles due to their special design. The pick-up of beams at the profile web is possible without any problems due to the specially shaped pole surface. FXE-TP lifting magnets are also available as a truss solution, specially tailored to your application.

Permanent magnetic chucks type PMNM are high precision plates for clamping small and thin parts for precision grinding and eroding. The low magnetic field height prevents magnetization of the processing tools. The chipboard is activated via a removable hex shifter. Structure: — Neodymium magnet system, steel body — transverse pole pitch 1.4 + 0.5mm — Holding power 100 N/cm2 — Magnetic field height 5mm — Pole plate wearing limit 6mm Recommendation: High-precision chuck for grinding and eroding

FX lifting magnets in universal design convince by their wide field of application. The FX achieves good results with large air gaps as well as with thin flat and round materials with a compact design and low dead weight. The device is characterized by great robustness and a very good price/performance ratio. First choice for all users who want to move massive sheets and blocks.

We also manufacture permanent magnet lifting trusses according to your individual requirements. As a load-bearing load beam or light spreading beam with two or more magnets, the possibilities are manifold. FXE-T truss solutions with onBoard control technology are operated directly on mains voltage and can therefore be used very quickly on different cranes without individual control installation. Flaig Magnetsysteme offers trusses for all sheet metal formats, beams and profiles and also for clearing cutting tables in just one stroke.

FXE-T2500/50 and 4000/80 electro-permanent lifting magnet trusses in compact design with onBoard control technology are designed for frequent handling of larger formats. Like FXE lifting magnets, they can be operated directly from mains voltage and are therefore very quickly installed and ready for use. They can be controlled directly on the unit or optionally via remote control. The FXE-T6400/80 electro-permanent lifting magnet truss is a fully equipped standard unit with all options. The truss with 6400 kg max. lifting capacity is equipped with sliding magnetic modules and can thus safely move sheet metal formats from min. 1200mm length to max. 6000mm length.

FX-WP lifting magnets are waterproof to 1.5m diving depth. The multi-sealed, super-strong permanent magnet system sits in a fully nickel-plated magnet body. It is a diver. FX lifting magnets in universal design convince by their wide field of application. The FX achieves good results with large air gaps as well as with thin flat and round materials with a compact design and low dead weight. The device is characterized by great robustness and a very good price/performance ratio.

FX-VV is the lifting magnet for profiles and hot components. The long, narrow design is conceived to pick up beams and profiles, also on the inner web of the beam, and reach their maximum holding force even with comparatively thin material thickness, so that even thin sheets can be lifted safely. Thanks to the 90° double prism, angle profiles can now be can now be picked up on the inside and outside, or components can be turned. Steel fabricators rely on FX-VV.