Manuals - Import export

The sliding gate manual valve for low temperature type 8056 in reinforced version is used for cryogenic control applications down to 200°C. Media such as hydrogen, nitrogen, oxygen, carbon dioxide, etc. can be shut off safely and can be controlled excellently, even in the low temperature range.

The sliding gate manual valve type for high temperature type 8053 in reinforced version is suitable for a wide range of process applications up to 530°C. Media such as steam, liquids, gases, etc. can thus be shut off safely and controlled excellently, even in the high temperature range.

The sliding gate manual valve type 8051 in short design is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be shut off safely with low actuating force and can be controlled excellently.

The sliding gate manual valve type 8050 in reinforced design and long construction is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be shut off safely with low actuating force and can be controlled excellently.

The sliding gate manual valve type 8050 in long design with on/off and control operation is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be shut off safely with low actuating force and can be controlled excellently.

The segment disc manual control valve type 5020 with manual actuator is a perfect choice for on/off and control applications of liquids and vapors, even if they are contaminated by particles.

This exceptionally versatile tool for post-mould assemblies is ideally suited to all levels of production: from a single unit for prototype assembly, to multiple units on an assembly line. The SPIROL® Model CM Manual Compression Limiter Installation Machine easily accommodates quick change-overs by simply: • Replacing the fixture • Swapping insertion punch/pusher tip • Adjusting the positive stop for new install height. The use of high quality shafting and bearings results in smooth operation, precise positioning, repeatability, and durability. The Model CM Manual Compression Limiter Installation Machine installs Compression Limiters ranging in diameter from M3 to M10 metric and #4 to 3/8" unified, and has a maximum insertion force of 0.9kN (200 lbs).

In the tried-and-tested, gasketed design, the EC-series offers many benefits to the user on top of its ease of operation. Due to the internal drainage, use in even the most hygienically clean areas is possible. The press lock is performed by an automatically self-regulating pneumatic/hydraulic closing system. The automatic closing pressure maintenance ensures that the plate pack always remains closed. An adjustable pressure switch with a potential-free contact is provided for integration into the customer's control system. This prevents the feeding pump from running uncontrollably. Also, as with all AQUACHEM filter presses, the discharge manifold can be generated here at the customer's request. Due to the gasketed design, the seamless backflushing of the filter media in the filter press is possible. The filter press frame is phosphated and powder-coated, offering a high level of protection against external influences.

This exceptionally versatile tool is ideally suited to all levels of production: from a single unit for prototype assembly, to multiple units on an assembly line. The Model PM Manual Pin Inserter easily accommodates quick change-overs. The part holding device (fixture) is simply replaced from the base of the machine. The pin diameter is easily changed, positive pin depth easily adjusted, and part size variation easily accommodated. The use of high-tech shafting and bearings results in smooth operation, precise positioning, repeatability, and durability. The Model PM Manual Pin Inserter installs pins ranging in diameter from 0.8mm-4mm (.031”-.156”) with a maximum insertion force of 0.9 kN (200 lbs).

The AQUACHEM LCM 320 (pocket press membrane) is ideal for mobile deployment on site on a suitable trolley and can be operated with up to 15 bar loading and 15 bar membrane squeezing. This machine can also be used as a testing filter press in the case in order to decide on the right fabric or to check the filterability of the suspension. Fully equipped, this compact press can manually implement functions that our fully automatic machines can do. The AQUACHEM LC 320 (pocket press chamber) is identical in design to the LCM 320 and differs only in its function as a chamber filter press (without membrane). The LC 470 is the more affordable, low-cost version of the EC-series. Main feature is the restriction of the feeding pressure to 7 bar. All other features are the same as the EC-series. This series is built in a compact design with a feeding pump and discharge manifold.

Whether an individual circuit board or full-scale, demanding device assembly – PRUFREX will manufacture your products to your individual specifications and quality guidelines. Whether it's manual soldering with robotic support, wave and selective soldering or laser soldering – in all assembly tasks, we are able to use any technique required without a problem. Depending on the component, different soldering technologies offer different advantaged. We will adjust the process individually to your project.

Melamine table top: - chipboard according to DIN 68765, melamine resin coated on both sides and 2 mm ABS edge - the table top is hygienic, it is not harmful to food, and is simple to clean High-quality frame model Timo: - steel: 40 x 80 x 2 mm - height adjustment: 63,5 - 83,5 cm (withou table top), grid: 2 cm - color: polyester powder-coated , skate: Inox - plastic glides for safe standing, inclusive level compensation up to 10 mm Selection options: - table top color - table top thickness - dimension - frame color Optional: - table top extension We offer the following discounts: 10+ pieces 3% | 20+ pieces 5% 50+ pieces 7% | 100+ pieces 10% If you need more tables please send a request!

Melamine table top: - chipboard according to DIN 68765, melamine resin coated on both sides and 2 mm ABS edge - the table top is hygienic, it is not harmful to food, and is simple to clean High-quality frame model Thea: - steel: 40 x 80 * 2 mm - height adjustment: 65 - 85 cm (withou table top), grid: 2 cm - color: polyester powder-coated - plastic glides for safe standing, inclusive level compensation up to 10 mm Selection options: - table top color - table top thickness - dimension - frame color We offer the following discounts: 10+ pieces 3% | 20+ pieces 5% 50+ pieces 7% | 100+ pieces 10% If you need more tables please send a request!

The filter presses from AQUACHEM of the EC Beverage series are used in the beverage industry, for example, for the filtration of selected wines. Another feature is that the filter elements are gasketed, and therefore the must or juice does not also come into contact with the ambient air. The EC Beverage series is offered as standard in the filter plate sizes 470, 630 and 800 mm.

Manual override and stroke limits for pneumatic piston and diaphragm actuators.

The Model PMH easily accommodates quick change-overs. The fixture is simply replaced at the base of the machine, and the pin diameter is easily changed by switching the pin driving chuck. The precisely machined rack and casting results in smooth operation, precise positioning, repeatability, and durability. The Model PMH Heavy Duty Manual Pin Inserter installs pins ranging in diameter from 0.8mm-10mm (.031”-.375”) with a maximum insertion force of 6.7 kN (1,500 lbs).

This versatile tool is ideally suited for low to moderate levels of production for assemblies that require installation forces up to 22.2 kN (5,000 lbs). The Model PMX Extra Heavy Manual Pin Inserter easily accommodates quick change-overs. The fixture is simply replaced at the base of the machine, and the pin diameter is easily changed by switching the pin driving chuck. This Extra Heavy Duty Manual Pin Inserter will provide smooth operation, repeatability and durability.

Highquality angle seat manual valve made from stainless steel, also suitable for neutral and aggressive media. The angle seat design offers a high flow rate.Whitworth pipe thread NPT thread Welding ends Triclamp connection Special connections

Suitable also for welding precision mechanical parts and medical technology components as well as for the manufacture of sensors and electrical components The ALS 100 is an ergonomic workplace The spacious work chamber offers a very brightly lit work area and is loaded via two side doors. The average power of 100 W enables a fast pulse sequence (up to 25 Hz) and thus fast work even at high energy settings. The homogeneous fusion of the materials results in welding results of the highest quality. The laser is used in the manufacture and repair of jewelry, in precision engineering or when welding sensors

With the new ALO manual welding laser, you can either work manually or with an axis of rotation for circular welding. The working chamber is easily accessible via leather curtains, but the welding itself still takes place in the shielded laser safety area. The spacious working chamber can be loaded quickly through various openings, without opening doors: a large opening at the front ensures easy access to the welding chamber. The slots on the side enable the operator to position longer components in the machining area and to weld them in a laser-safe manner. Another passage on the bottom of the working chamber allows loading from below. The laser safe leather curtain offers certified laser protection so that the laser device can be placed in any work environment. The armrest is extremely comfortable - ensuring relaxed work. A lot of attention was also paid to good ergonomics. A high-quality extraction system with filter is integrated as standard.

Manually controlled systems In manual systems, goods are moved through the system by hand or using a chain hoist. A hardware controller is used to set and monitor the individual bath parameters. Upon request, a small PLC can be installed for regulation and logging purposes. The electroplater sets the exposure time for the individual baths on each bath. The quality of the individual process steps, and therefore the parts themselves, is therefore greatly dependent on the precision of system personnel. Manual systems are used when semi- or fully automated operation would not be reasonable from an economic or technological standpoint.  

After production of repair, the workpieces are lowered in a parts carrier into the immersion tank. A pump feeds cold cleaning agent containing solvents into the tank so that dirt is dissolved and removed by flooding. Persistent dirt can be removed manually with the flowthrough brush. The cleaning medium in the tank is constantly recirculated through a filter. Cleaning with sprayable cold cleaning agents containing hydrocarbons with a flash point > 60 °C Manual cleaning station Continuous filtration of cleaning medium Immersion tank suitable for wide range of workpieces Available as 1bath unit with loading of the unit via Manual loading

Prefabricated or single elements; resilient and smooth-running made of inherently stable aluminium or steel profile Individual elements —roller element, various Various versions —sliding rails, installation at two heights —Sliding ramp, smooth transition between different heights Different heights Ball element, low-wear and low-friction ball roller for flexible movement —Brush element, elastic brush fibres for gliding —reverse element, prevents backward movement —brake, gentle braking and starting speed —distance piece, as distance piece for staggered arrangement Accessories for roller rails —Holder, various for 4-sided and round profile —end plate, closure of the end face —guide rail, guiding/positioning Further accessories —stop buffer, damping of the stop —Roller holder, mounting on profile —Sensor holder, variable mounting of limit switches —backstop, prevention of tool carrier retraction Partially esd-capable and also available as individual parts

The LS 1679 has been specially developed for press brakes. The basis for its high accuracy and repeatability is its precise glass scale and high-quality integral bearing. Thanks to the material of its steel track and steel roller bearing component pair it is very robust. There are many variants for connection to the machine frame, whereby the ball coupling offers the most degrees of freedom. Besides the standard resolution with 5 µm measuring step there is also a variant with 1 µm. For perfect mounting to the two C-columns there are variants with rightward and leftward cable outlets.

The aluminum housing of a HEIDENHAIN sealed linear encoder protects the scale, scanning carriage, and its guideway from chips, dust, and fluids. Downward-oriented elastic lips seal the housing. The scanning carriage travels along the scale on a lowfriction guide. It is connected to the external mounting block by a coupling that compensates unavoidable misalignment between the scale and the machine guideways. For typical applications on manual machine tools such as milling machines or lathes, display steps of 10 µm or 5 µm are suffi cient. Such display steps are provided by the LS 300 and LS 600 series linear encoders with an accuracy grade of ± 10 µm per meter traverse.

Digital readouts from HEIDENHAIN are used in a wide variety of applications. They are deployed on machine tools, infeed axes on saws and presses, measuring and inspection equipment, dividing apparatuses, setting tools, production inspection measuring stations, and more. To meet such demands, these digital readouts can also be used in combination with numerous encoders from HEIDENHAIN. Digital readouts with multiple axes are primarily used on manually operated machine tools, where their practical cycles provide optimal support to the operator during milling, drilling, or turning. By instantly displaying the position in an easy-to-read manner, digital readouts enable a significant increase in productivity.