Manuals - Import export

The sliding gate manual valve for low temperature type 8056 in reinforced version is used for cryogenic control applications down to 200°C. Media such as hydrogen, nitrogen, oxygen, carbon dioxide, etc. can be shut off safely and can be controlled excellently, even in the low temperature range.

The sliding gate manual valve type for high temperature type 8053 in reinforced version is suitable for a wide range of process applications up to 530°C. Media such as steam, liquids, gases, etc. can thus be shut off safely and controlled excellently, even in the high temperature range.

The sliding gate manual valve type 8051 in short design is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be shut off safely with low actuating force and can be controlled excellently.

The sliding gate manual valve type 8050 in reinforced design and long construction is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be shut off safely with low actuating force and can be controlled excellently.

The sliding gate manual valve type 8050 in long design with on/off and control operation is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be shut off safely with low actuating force and can be controlled excellently.

The segment disc manual control valve type 5020 with manual actuator is a perfect choice for on/off and control applications of liquids and vapors, even if they are contaminated by particles.

This exceptionally versatile tool for post-mould assemblies is ideally suited to all levels of production: from a single unit for prototype assembly, to multiple units on an assembly line. The SPIROL® Model CM Manual Compression Limiter Installation Machine easily accommodates quick change-overs by simply: • Replacing the fixture • Swapping insertion punch/pusher tip • Adjusting the positive stop for new install height. The use of high quality shafting and bearings results in smooth operation, precise positioning, repeatability, and durability. The Model CM Manual Compression Limiter Installation Machine installs Compression Limiters ranging in diameter from M3 to M10 metric and #4 to 3/8" unified, and has a maximum insertion force of 0.9kN (200 lbs).

Grease filling device-hand-operated 25 kg-BE-Ø 310-335 mm specification Pump station Suction pipe Filling nipple, M 10 x 1 (12 670), included loose, for Conversion for grease guns from other brands Dust cover (17 194), container fastening (17 199) and Grease follower piston (17 320) Dust cap on filling coupling, secured with chain Packed in individual cartons Special features for filling lever, one-hand and Compressed air grease guns

Castrol Manual EP SAE 80W is a versatile mineral oil-based high-pressure transmission oil of API class GL-4 for manual and axle transmissions. Advantages high pressure absorption capacity pronounced synchronous properties lasting protection against corrosion good foam resistance neutral sealing behavior optimal wear protection Specifications API GL-4 MB approval 235.1 ZF TE-ML 17A

In the tried-and-tested, gasketed design, the EC-series offers many benefits to the user on top of its ease of operation. Due to the internal drainage, use in even the most hygienically clean areas is possible. The press lock is performed by an automatically self-regulating pneumatic/hydraulic closing system. The automatic closing pressure maintenance ensures that the plate pack always remains closed. An adjustable pressure switch with a potential-free contact is provided for integration into the customer's control system. This prevents the feeding pump from running uncontrollably. Also, as with all AQUACHEM filter presses, the discharge manifold can be generated here at the customer's request. Due to the gasketed design, the seamless backflushing of the filter media in the filter press is possible. The filter press frame is phosphated and powder-coated, offering a high level of protection against external influences.

This exceptionally versatile tool is ideally suited to all levels of production: from a single unit for prototype assembly, to multiple units on an assembly line. The Model PM Manual Pin Inserter easily accommodates quick change-overs. The part holding device (fixture) is simply replaced from the base of the machine. The pin diameter is easily changed, positive pin depth easily adjusted, and part size variation easily accommodated. The use of high-tech shafting and bearings results in smooth operation, precise positioning, repeatability, and durability. The Model PM Manual Pin Inserter installs pins ranging in diameter from 0.8mm-4mm (.031”-.156”) with a maximum insertion force of 0.9 kN (200 lbs).

Our assembly lifts are ingenious - with a max. lift height of 7.9 m, it helps to safely manoeuvre loads of up to 500 kg. One of the decisive advantages of this assembly lift is that, during glass pane assembly, the vacuum suction cups can be driven to the facade without problems, as Heavydrive uses counter weights. With conventional lifts, for exhibition stand construction or sound engineering, the lifting carriage is underneath the lifted object. With our models, this would be disruptive. Last but not least, this practical all-rounder is folded by hand and, if needed, even fits into a car. It is hand driven and therefore requires hardly any servicing. Movable under a load of 500 kg.

The AQUACHEM LCM 320 (pocket press membrane) is ideal for mobile deployment on site on a suitable trolley and can be operated with up to 15 bar loading and 15 bar membrane squeezing. This machine can also be used as a testing filter press in the case in order to decide on the right fabric or to check the filterability of the suspension. Fully equipped, this compact press can manually implement functions that our fully automatic machines can do. The AQUACHEM LC 320 (pocket press chamber) is identical in design to the LCM 320 and differs only in its function as a chamber filter press (without membrane). The LC 470 is the more affordable, low-cost version of the EC-series. Main feature is the restriction of the feeding pressure to 7 bar. All other features are the same as the EC-series. This series is built in a compact design with a feeding pump and discharge manifold.

Whether an individual circuit board or full-scale, demanding device assembly – PRUFREX will manufacture your products to your individual specifications and quality guidelines. Whether it's manual soldering with robotic support, wave and selective soldering or laser soldering – in all assembly tasks, we are able to use any technique required without a problem. Depending on the component, different soldering technologies offer different advantaged. We will adjust the process individually to your project.

Castrol Transmax Manual V 75W-80 with Smooth Drive TechnologyTM is a fully synthetic 75W-80 gear oil with special EP performance, excellent synchronous behavior and fuel saving potential. It is suitable for transaxle systems, manual transmissions, transfer cases and axles where a transmission oil according to API GL 4 is required. Castrol recommends Transmax Manual V 75W-80 for 5- and 6-speed manual transmissions from Volkswagen, Audi, Seat and Skoda. Specifications API GL-4+ Audi TL 52532 Castrol Recommendations Suitable for use where the following is called for: VW G 052 171, VW G 052 527, VW G 052 512, VW G 052 532, VW G 055 532

Castrol Transmax Manual Transaxle 75W-90 is a modern, fully synthetic high-performance manual transmission lubricant. Advantages excellent wear protection and shiftability for optimal use in transaxle transmissions - extended transmission service life minimized switching forces under all climatic conditions special protection during cold starts due to low pumping capacity reduced temperature level and excellent transmission cleanliness with extended service life Specifications API GL-4+ VW 501 50 SAE Class according to J306 before 1998

Castrol Transmax Manual Transaxle 75W-90 is a modern, fully synthetic high-performance manual transmission lubricant. Advantages excellent wear protection and shiftability for optimal use in transaxle transmissions - extended transmission service life minimized switching forces under all climatic conditions special protection during cold starts due to low pumping capacity reduced temperature level and excellent transmission cleanliness with extended service life Specifications API GL-4+ VW 501 50 SAE Class according to J306 before 1998

Castrol Transmax Manual EP 80W-90 is a mineral oil-based manual transmission oil of viscosity class SAE 80W-90 for use in transmissions where the API GL-4 requirement is prescribed. Advantages -High temperature stability protects against deposits and oil thickening -High wear protection and good load-carrying capacity leads to extended service life of the transmission components Specifications API GL-4 MAN 341 Type Z2 ZF TE-ML 02B, 17A

Castrol Transmax Manual EP 80W-90 is a mineral oil-based manual transmission oil of viscosity class SAE 80W-90 for use in transmissions where the API GL-4 requirement is prescribed. Advantages -High temperature stability protects against deposits and oil thickening -High wear protection and good load-carrying capacity leads to extended service life of the transmission components Specifications API GL-4 MAN 341 Type Z2 ZF TE-ML 02B, 17A

Castrol Transmax Manual EP SAE 80W is a versatile mineral oil-based high-pressure gear oil of API class GL-4 for manual and axle gears. Application Castrol Transmax Manual EP 80W is preferably used in synchronized and unsynchronized manual transmissions as well as drive axles of cars, commercial vehicles, buses, agricultural and construction machinery subject to normal loads. When using it, the manufacturer's instructions must be observed. Specifications API GL-4 MB release 235.1 ZF TE-ML 17A Further information Transmax Manual EP 80W is registered under the following ZF number: ZF004862

Melamine table top: - chipboard according to DIN 68765, melamine resin coated on both sides and 2 mm ABS edge - the table top is hygienic, it is not harmful to food, and is simple to clean High-quality frame model Timo: - steel: 40 x 80 x 2 mm - height adjustment: 63,5 - 83,5 cm (withou table top), grid: 2 cm - color: polyester powder-coated , skate: Inox - plastic glides for safe standing, inclusive level compensation up to 10 mm Selection options: - table top color - table top thickness - dimension - frame color Optional: - table top extension We offer the following discounts: 10+ pieces 3% | 20+ pieces 5% 50+ pieces 7% | 100+ pieces 10% If you need more tables please send a request!

Melamine table top: - chipboard according to DIN 68765, melamine resin coated on both sides and 2 mm ABS edge - the table top is hygienic, it is not harmful to food, and is simple to clean High-quality frame model Thea: - steel: 40 x 80 * 2 mm - height adjustment: 65 - 85 cm (withou table top), grid: 2 cm - color: polyester powder-coated - plastic glides for safe standing, inclusive level compensation up to 10 mm Selection options: - table top color - table top thickness - dimension - frame color We offer the following discounts: 10+ pieces 3% | 20+ pieces 5% 50+ pieces 7% | 100+ pieces 10% If you need more tables please send a request!

Castrol Transmax Manual EP 80W-90 is a mineral oil-based manual transmission oil of viscosity class SAE 80W-90 for use in transmissions where the API GL-4 requirement is prescribed. Advantages -High temperature stability protects against deposits and oil thickening -High wear protection and good load-carrying capacity leads to extended service life of the transmission components Specifications API GL-4 MAN 341 Type Z2 ZF TE-ML 02B, 17A

Castrol Transmax Manual Transaxle 75W-90 is a modern, fully synthetic high-performance manual transmission lubricant. Advantages excellent wear protection and shiftability for optimal use in transaxle transmissions - extended transmission service life minimized switching forces under all climatic conditions special protection during cold starts due to low pumping capacity reduced temperature level and excellent transmission cleanliness with extended service life Specifications API GL-4+ VW 501 50 SAE Class according to J306 before 1998

The filter presses from AQUACHEM of the EC Beverage series are used in the beverage industry, for example, for the filtration of selected wines. Another feature is that the filter elements are gasketed, and therefore the must or juice does not also come into contact with the ambient air. The EC Beverage series is offered as standard in the filter plate sizes 470, 630 and 800 mm.

Manual override and stroke limits for pneumatic piston and diaphragm actuators.

The Model PMH easily accommodates quick change-overs. The fixture is simply replaced at the base of the machine, and the pin diameter is easily changed by switching the pin driving chuck. The precisely machined rack and casting results in smooth operation, precise positioning, repeatability, and durability. The Model PMH Heavy Duty Manual Pin Inserter installs pins ranging in diameter from 0.8mm-10mm (.031”-.375”) with a maximum insertion force of 6.7 kN (1,500 lbs).

This versatile tool is ideally suited for low to moderate levels of production for assemblies that require installation forces up to 22.2 kN (5,000 lbs). The Model PMX Extra Heavy Manual Pin Inserter easily accommodates quick change-overs. The fixture is simply replaced at the base of the machine, and the pin diameter is easily changed by switching the pin driving chuck. This Extra Heavy Duty Manual Pin Inserter will provide smooth operation, repeatability and durability.

Designed to install virtually any type of Heat / Ultrasonic Style Insert. As much as 75% of an Insert’s performance is the direct result of how well it was installed. Therefore, in order to maximize performance, all of the factors that impact installation must be carefully controlled. SPIROL’s Model HM Manual Insert Driver has been designed to eliminate the dependency on the operator to control these factors. The result is nearly perfect flow of the plastic for optimal retention and performance. The Model HM Manual Insert Driver is simple to operate and easily adjustable. The Model HM installs Inserts ranging in size from M2 - M6 metric threads and #2 - 1/4 unified threads, and the simple up-down adjustment of the machine makes it easy to accommodate various sized plastic components.