Results for
RUDOLF UHLEN GMBH
Germany
• The mesh visor is made of galvanized wire cloth • It shields the face against radiant heat • The mesh visors are offered in two sizes: 500x250mm and 500x300mm • Like the other face shields, the mesh visors are also attached to an aluminium hard hat bracket (e.g. GFKHH003) • The blackened inner side ensures good visibility and prevents the wearer from being blinded by glare
Request for a quoteEMBRO GMBH
Germany
In order to meet the demands for robustness and efficient heat output, we have embroidered the heating element on a glass mesh fabric carrier material. Between the meandering arrangement of the heating strands, we integrate a recess for the temperature switch in the CAD layout. In addition, a second wire is laid concurrently as a PTC thermistor for the electrical connection of the safety switch. After the technical embroidery process, the safety switch is inserted and connected by our company’s respective department. Each prefabricated element is tested for functionality and performance in the final inspection and is delivered to the customer after passing the test. As a semi-finished product, the infrared heating element on glass mesh fabric can be further processed by the customer, e.g. in connection with silicone, rubber or epoxy resin.
Request for a quoteHR-STRUCTURES GMBH
Germany
To protect your goods from condensation or condensation water, it is possible to integrate a special underlay tarpaulin. It consists of mesh fabric, which allows moisture to diffuse from the inside of the hall to the outside. The fields of application of our condensation water protected halls: - Storage for temperature-insensitive goods - protected loading of transporters - protected parking and storage area - Picking for goods of all kinds - Maintenance and repair When single-layer tarpaulins in the roof are no longer sufficient, we at HR-Structures recommend our modern thermal tarpaulins. Produced in membrane technology, the two-layer roof and gable covering has a heat-insulating effect and prevents condensation on the underside of the roof tarpaulin. It consists of two shells, which are filled with air and thus provide additional insulation and protection against condensation. As wall cladding we recommend here the trapezoidal sheet.
Request for a quoteBIEGLO GMBH
Germany
The Dexnyl PEEK filaments of BIEGLO is a high performance product made by melt spinning. Semicrystalline PEEK has high tensile strength, it is exceptionally resistant to chemicals and can withstand extreme temperatures. These features ensure a longer product life, lower maintenance costs, less machine downtime and wider material design options compared to steel or aluminum parts. PEEK filaments can be used very well for 3D printing. Printing with PEEK requires 360 ° C to 380 ° C. So far, only specially modified 3D printers are able to achieve this heat. Sliced woven and/or unidirectional fibers significantly reinforce matrix material and are a popular additive for composites. PEEK filaments are also used on musical instruments, rackets and wide or narrow woven straps, filtration mesh fabrics and sewing threads. Due to their low weight and high temperature resistance, PEEK filaments are popular in many other industies, such as automotive and aerospace industries.
Request for a quoteBRÜCKNER TEXTILE TECHNOLOGIES GMBH & CO. KG
Germany
We can offer finishing lines for glass fabric with extremely light surface weights for the production of circuit boards including highttemperature treatment up to 450°C, finishing lines for woven glass fabric for the production of glass wall paper and for the construction of reinforcement and grinding disks. We also can supply modules such as unwinding units, heating presses, fabric accumulators, drying and heat treatment units, traction units, stretching units, selvedge gumming and cutting units and batchers used as individual units.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
RÜHL FEUERLÖSCHMITTEL GMBH
Germany
Polyester resins (UP resins) form the basis of our product range in the glass fibre reinforced plastic systems business area – with a wide variety of applications. They range from thixotrope standard systems for manual lamination and fibre spraying to low-viscosity standard formulations for polymer concrete and sanitary applications to numerous special formulations for specific requirements. With a broad spectrum of properties and applications, our UP resin systems are suitable for products in a wide variety of industries. Typical properties Dense matrix / composite of approximately 1.1 g/cm³ / 1.5–1.7 g/cm³ Fibre content 25-50 % of total weight Moulded part mass per unit area of 4500-8000 g/m² Flexural modulus of elasticity 5000–25,000 MPa (with reinforcing mesh) Bending resistance of 130–260 MPa (with reinforcing mesh) Impact resistance of 45–95 KJ/m² Reinforcing materials: Continuous or cut glass fibre mats, fleece Mesh Non-crimp fabrics Special formulations and versions Styrene-reduced, environmentally friendly formulations Low-viscosity injection resins with reduced exothermic peak Formulations for the pultrusion process Systems with high chemical and hydrolysis resistance DIN 1140 versions with special mechanical values and dimensional stability under heat greater than 100 °C (HDT > 100 °C) Resins with good adhesion for combination with PVC Resin systems with shipping industry approval: Det Norske Veritas/Lloyd’s Register of Shipping/Germanic Lloyd Coordination with gel coat/top coat for surface refinement Flame protection formulations Electrical industry: UL 94 V0 Rail vehicle construction: DIN 5510 (S4, SR2, ST2)
Request for a quoteResults for
Mesh fabrics - Import exportNumber of results
7 ProductsCountries
Company type