Stage - Import export

The Losberger De Boer Podium system makes it easy to erect a stage in an extremely short time. It offers artists and announcers the chance to be visible and take center stage. The Podium can be used for a wide variety of occasions. Its construction is solid and in accordance with German safety standards. It is designed with a long life span and a large number of deployments in mind. High-quality aluminum and hot-dip galvanized, corrosion-proof steel parts make outdoor use completely safe and add to the Podium’s durability.

Dry sump oil pumps in modular design with 1 to 4 chambers. Delivery rates on the pressure side are a maximum of 29 liters per minute. The suction side maximum 24 liters per minute. Suitable for engines with a capacity of 2 to 8 liters

Defects to be examined in this application are very small, their size is often lower than 0.5 mm – hard to discover by human eye. Rework in the course of the production of the final product however, proves to be complicated and expensive. Large rolls with a diameter of 2 m and a length of 10 m are very difficult to remove and to reinstall. In order to avoid corresponding inconveniencies, it is essential to support the manufacturing process of the rolls themselves by a reliable quality control in the form of an automated final inspection.As the Quelltech Q6 laser scanner features an extremely precise resolution of 4096 Pixels/Profile at a high scan rate, this model proved to be able to meet the requirements and was mounted onto the positioning stage of the grinding machine. Furthermore, an industrial measurement computer was added, used for the analysis software of the point cloud. On the basis of this configuration, the entire roll surface could be recorded on a helical path.

Safely guide many different cables in a confined space with e-spool. e-spool uniquely combines two different energy supply systems: one standard energy chain is guided by a roller, providing the correct length and tension of the energy supply system through an integrated spring. In the home position, the energy chain is completely rolled up to save space. The twisterband connects the roller with the shaft end block, serving as an interface to the supply side cables. - According to DIN EN 17206 and DGUV principle 315-390 - No tensile strain on the cables - Energy supply is possible in all directions (horizontal, vertical, diagonal) - Space-saving, no "chain station", as the energy chain is rolled up in the starting position, ensuring the paths remain clear - Cables can be retrospectively added or changed - Maximum extension and retraction speed 1m/s

Liftband - modular, quiet, space-saving - vertical guidance of energy, data and media. With the liftband, high vertical applications can be implemented, which have a lot of space available horizontally but only allow for low system heights. - Alternative to zig-zag solution - Lighter and with reduced installation space - Vertical applications implemented with ease - Speeds up to 1m/s - Acceleration up to 2m/s2 - Max. extension length 13m - Cable bend radius up to 250mm - Possible application areas: theatre and stage technology, indoor cranes, mobile telescopic antennas -Retracted system - safe storage in a solid steel basket -Chamfered basket: for safe operation -Strong drive plate: for easy attachment to your application -Optimised for space: telescopic steel basket for best use of space

dryve motor control - connect & control... Operate DC motors wear-free in left/right rotation - very easy with the new control for drylin® E drive systems from igus®. drylin® D5 for DC motors -Ready for immediate use. No parameterization or programming necessary - Left/right run via digital input - Velocities & accelerations via external PWM input signal - Available with and without housing - Inexpensive - Free pattern programs

dryve motor control - Connect, select, control... Precise positioning, endless movements, continuous end-to-end movements - simply defined with the new control for drylin® E linear systems from igus®. - No software or app installation necessary - Quick commissioning - Compatible with numerous industrial controls (e.g. Siemens S7 / Beckhoff) - For stepper motors - Cost-effective

dryve motor control - Connect, select, control... Precise positioning, endless movements, continuous end-to-end movements - simply defined with the new control for drylin® E linear systems from igus®. - No software or app installation necessary - Quick commissioning - Compatible with numerous industrial controls (e.g. Siemens S7 / Beckhoff) - For stepper motors - Cost-effective

The KEBAFORM range consists of individually designed engineering solutions resulting in the creation of innovative fasteners. This range fits various requirements, such as holder, stop bolt, distance sleeve, or adjustment element. Multiple phased cold-forming manufacturing processes create a unique and advantageous end product. This know-how and technology allow for a complex fastening element to be formed in up to six blows. PRODUCTION CAPABILITIES • 100% adaptable to any application • Minimization of materials used and inventory costs • Multi-functional use allows for large savings • Simple and efficient assembly • Alternative and replacement of turned parts

Our production facilities are fully up to date. Thanks to the adjustable design of our lines, we can easily implement special solutions. High-performance placement machines by ASM with short setup times and high flexibility form the backbone of our automated SMD placement systems. Our services also include assembly of THR components (pin-in-paste technology). Extensive monitoring systems and built-in cameras ensure high precision in the placement process.

XXL O‑rings are typically used as static radial or static axial seals in mechanical, power plant, plant and heavy equipment engineering. The special stagevulcanization production technology is also suitable for single or small lot production of smaller O‑rings with a nonstandard inside diameter.

The lifting column LAMBDA-Colonne is a telescopic drive which is alone or as a pair (Twin) suitable for lifting and lowering in many possible applications. It can be used for lifting forces of maximal 4,500 N (single) and 9,000 N(Twin) and a total lifting height of 600 mm. Max. travel 600 mm Max. compressive force 4500 N Max. tensile force 4500 N Max. travel speed 8-20 mm/s Protection rating IP 54 | IP 40

Single-stage rotary vane pumps from Pfeiffer Vacuum have long been some of the most widely used products for processes in the low and medium vacuum range. Their long life and pumping speed, irrespective of the gas used, are the outstanding properties of this pump. Typical applications are found in widely ranging sectors: — Analytics (mass spectrometry, electron microscopy) — Coating technology (surface protection, decorative films, display units, monitor screens) — Vacuum metallurgy (vacuum soldering, vacuum sintering, vacuum alloys, furnace construction) — Leak detection technology (vacuum systems, automotive tanks, airbag cartridges, packaging) — Lighting industry (light bulb manufacture) — Drying industry (vacuum drying, transformer drying)

The guide profiles of the Alpha Colonne are exactly square shaped. This makes the side forces identical for all sides. Compared to other systems, it has a third guide step with a large overlapping when it is extended which improves its stability. Max. travel 600 mm Max. compressive force 3000 N Max. compressive force 3000 N Max. travel speed 8-18 mm/s Protection rating IP 30

Two-stage ventilation valve for release rates of 450 to 2000 m3/h in coarse and 20-40 m3/h in fine ventilation. For DN 80 and 100 housing material: EN-GJS-400-15, coating EKB; for DN 150 housing material S235 JR or P355 T1 and the coating consists of a wastewater-resistant Permacore thick micaceous iron ore coating First, air escapes during the first stage (coarse ventilation), until the medium closes off the first stage as it continues to flow. Any remaining air then escapes more slowly through the second stage (fine ventilation), until it is also closed. Gases collect, causing the fine ventilation to open once again until the medium closes this stage as well as it continues to flow.

The Multilift is for continuous height adjustment of tables, equipment, assembly workstations and similar applications. The lifting column can be operated alone or as a pair in parallel. To establish a configuration with absolute synchronous run of several drives (maximal 4) a special drive control is available as synchronous version. Max. travel. 498 mm Max. compressive force. 3000 N Max. tensile force. 1000 N Max. travel speed 8 / 16 mm/s Protection rating IP 20

The RKSlimlift looks unflashy and filigree but it is highly loadable. The whole drive unit is placed in the column and is not visible from the outside. Fixing slots in the side walls offer the possibility to attach additional components, e.g. panels, cable channels and braces. Max. travel. 500 mm Max. compressive force. 4000 N Max. tensile force. 2000 N Max. travel speed. 8-32 mm/s Protection rating IP 30

engraved angle scale

Assembly device to impress lenses into cells.

With recurring assembly dimensions, the rotary stages likewise the lift and swivel stages allow diversification when combining with other UHL's positioning systems.

backlash-free pre-loaded roll bearing for high true-running and axial run-out accuracy backlash-free pre-loaded worm drive different mounting bore holes in the turntable to assemble fixtures and devices

The linear stages of the PT series are especially designed to provide high accuracy in compact dimensions. The bearing design without runnung-in provides an even higher accuracy than the LT series. The linear stages of the PT series are particularly suitable as vertical axis. normalized aluminium alloy, black or pale anodized cross roller guides, anti-backlash pre-loaded ball screw, anti-backlash pre-loaded

The linear stages of the LT series are especially designed to provide high accuracy in compact dimensions. The bellows are protecting the bearings, spindles and scales from external influences. normalized aluminium alloy, black anodized anti-backlash pre-loaded cross roller guides or profiled rail guides anti-backlash pre-loaded ball screw

The closed frame XY stages are especially designed to provide ultra high accuracy in compact dimensions. By the modular concept, they can be equipped with different motors and measuring systems. The close frame XY stages are particularly suitable for incident light and topographic applications. normalized aluminium alloy, black anodized cross roller guides, anti-backlash pre-loaded when equipped with motorized drives, anti-backlash pre-loaded ball screws are used

The open frame XY stages KT are especially designed to provide high accuracy in compact dimensions. By the modular concept, they can be equipped with different motors and measuring systems. The open frame XY stages are particularly suitable for transmitted light applications. normalized aluminium alloy, black anodized cross roller guides, anti-backlash pre-loaded when equipped with motorized drives, anti-backlash pre-loaded ball screws are used when hand driven, with quick-release for coarse adjustment and +/- 5 mm fine-pitch thread plane parallel glass top to put on the specimen

Compact single-stage worm geared motor with solid shaft. Different shaft positions are possible. Stock motors have 57W or 90W output power and a speed of 3000 rpm. An additional version with 93W and a speed of 3300 rpm is also available. The SN18 can be used wherever space is limited. It is widely used, for example, in door automation. Gearbox type: SN18 solid-shaft Motor type: 24V DC permanent magnet Mounting design: B3/B14 Ratios SN18 Solid Shaft: 2,5; 5; 7; 10; 12; 15; 18; 20; 24; 30; 38; 50; 55; 75; 100; Ratios SN18H Hollow shaft: 7; 15; 20; 30; 55; Protection class: IP40 /IP54 (Other protection classes on request) Additional data: — Motor and gear in ball bearing — worms hardened and ground — Worm wheels from special bronze For further information see product detail page.

Two-stage gear drive with hollow shaft Gear Type: SN19FH Motor Type: Three-Phase and Direct Current Mounting: Flange Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Two-stage gear drive with hollow shaft Gear Type: SN19H Motor Type: Three-Phase and Direct Current Mounting: Gear Foot Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Two-stage gear drive with hollow shaft Gear Type: SN12FHX Motor Type: Three-Phase Mounting: Flange Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.