Stage - Import export

Safely guide many different cables in a confined space with e-spool. e-spool uniquely combines two different energy supply systems: one standard energy chain is guided by a roller, providing the correct length and tension of the energy supply system through an integrated spring. In the home position, the energy chain is completely rolled up to save space. The twisterband connects the roller with the shaft end block, serving as an interface to the supply side cables. - According to DIN EN 17206 and DGUV principle 315-390 - No tensile strain on the cables - Energy supply is possible in all directions (horizontal, vertical, diagonal) - Space-saving, no "chain station", as the energy chain is rolled up in the starting position, ensuring the paths remain clear - Cables can be retrospectively added or changed - Maximum extension and retraction speed 1m/s

Liftband - modular, quiet, space-saving - vertical guidance of energy, data and media. With the liftband, high vertical applications can be implemented, which have a lot of space available horizontally but only allow for low system heights. - Alternative to zig-zag solution - Lighter and with reduced installation space - Vertical applications implemented with ease - Speeds up to 1m/s - Acceleration up to 2m/s2 - Max. extension length 13m - Cable bend radius up to 250mm - Possible application areas: theatre and stage technology, indoor cranes, mobile telescopic antennas -Retracted system - safe storage in a solid steel basket -Chamfered basket: for safe operation -Strong drive plate: for easy attachment to your application -Optimised for space: telescopic steel basket for best use of space

dryve motor control - connect & control... Operate DC motors wear-free in left/right rotation - very easy with the new control for drylin® E drive systems from igus®. drylin® D5 for DC motors -Ready for immediate use. No parameterization or programming necessary - Left/right run via digital input - Velocities & accelerations via external PWM input signal - Available with and without housing - Inexpensive - Free pattern programs

dryve motor control - Connect, select, control... Precise positioning, endless movements, continuous end-to-end movements - simply defined with the new control for drylin® E linear systems from igus®. - No software or app installation necessary - Quick commissioning - Compatible with numerous industrial controls (e.g. Siemens S7 / Beckhoff) - For stepper motors - Cost-effective

dryve motor control - Connect, select, control... Precise positioning, endless movements, continuous end-to-end movements - simply defined with the new control for drylin® E linear systems from igus®. - No software or app installation necessary - Quick commissioning - Compatible with numerous industrial controls (e.g. Siemens S7 / Beckhoff) - For stepper motors - Cost-effective

The lifting column LAMBDA-Colonne is a telescopic drive which is alone or as a pair (Twin) suitable for lifting and lowering in many possible applications. It can be used for lifting forces of maximal 4,500 N (single) and 9,000 N(Twin) and a total lifting height of 600 mm. Max. travel 600 mm Max. compressive force 4500 N Max. tensile force 4500 N Max. travel speed 8-20 mm/s Protection rating IP 54 | IP 40

The guide profiles of the Alpha Colonne are exactly square shaped. This makes the side forces identical for all sides. Compared to other systems, it has a third guide step with a large overlapping when it is extended which improves its stability. Max. travel 600 mm Max. compressive force 3000 N Max. compressive force 3000 N Max. travel speed 8-18 mm/s Protection rating IP 30

The Multilift is for continuous height adjustment of tables, equipment, assembly workstations and similar applications. The lifting column can be operated alone or as a pair in parallel. To establish a configuration with absolute synchronous run of several drives (maximal 4) a special drive control is available as synchronous version. Max. travel. 498 mm Max. compressive force. 3000 N Max. tensile force. 1000 N Max. travel speed 8 / 16 mm/s Protection rating IP 20

The RKSlimlift looks unflashy and filigree but it is highly loadable. The whole drive unit is placed in the column and is not visible from the outside. Fixing slots in the side walls offer the possibility to attach additional components, e.g. panels, cable channels and braces. Max. travel. 500 mm Max. compressive force. 4000 N Max. tensile force. 2000 N Max. travel speed. 8-32 mm/s Protection rating IP 30

Lifting column Multilift II ESD – discharging voltages via the lifting column In the electronics and semiconductor manufacturing industry, electrostatic discharges can impair the function of components being assembled, or even destroy them. Special ESD assembly workstations are equipped with an antistatic finishing that prevents this from occurring. Until now, lifting columns for the height adjustment of workstations have prevented the safe dissipation of electrostatic discharges by interrupting the electric connection between the table and the foot frame. However, with the Multilift II ESD, RK Rose+Krieger has developed a patented electric height adjustment system that is able to dissipate voltages. This has been realised thanks to the design of the outer and inner profiles which are continuously in contact with one another.

Compact single-stage worm geared motor with solid shaft. Different shaft positions are possible. Stock motors have 57W or 90W output power and a speed of 3000 rpm. An additional version with 93W and a speed of 3300 rpm is also available. The SN18 can be used wherever space is limited. It is widely used, for example, in door automation. Gearbox type: SN18 solid-shaft Motor type: 24V DC permanent magnet Mounting design: B3/B14 Ratios SN18 Solid Shaft: 2,5; 5; 7; 10; 12; 15; 18; 20; 24; 30; 38; 50; 55; 75; 100; Ratios SN18H Hollow shaft: 7; 15; 20; 30; 55; Protection class: IP40 /IP54 (Other protection classes on request) Additional data: — Motor and gear in ball bearing — worms hardened and ground — Worm wheels from special bronze For further information see product detail page.

Two-stage gear drive with hollow shaft Gear Type: SN19FH Motor Type: Three-Phase and Direct Current Mounting: Flange Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Two-stage gear drive with hollow shaft Gear Type: SN19H Motor Type: Three-Phase and Direct Current Mounting: Gear Foot Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Two-stage gear drive with hollow shaft Gear Type: SN12FHX Motor Type: Three-Phase Mounting: Flange Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with hollow shaft Gear Type: SN10FH Motor Type: Three-Phase Mounting: Flange Shaft design: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Two-stage gear drive with hollow shaft Gear Type: SN6FH Motor Type: Three-Phase Mounting: Flange Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Two-stage gear drive with hollow shaft Gear Type: SN13FH Motor Type: Three-Phase and Direct Current Mounting: Flange Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with hollow shaft Gear Type: SN10BFH Motor Type: Three-Phase Mounting: Flange Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Two-stage gear drive with hollow shaft Gear Type: SN13H Motor Type: Three-Phase and Direct Current Mounting: Gear Foot Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with hollow shaft Gear Type: SN10SVH Motor Type: Three-Phase Mounting: Gear Foot Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with hollow shaft Gear Type: SN10SHH Motor Type: Three-Phase Mounting: Gear Foot Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with hollow shaft Gear Type: SN8SVH Motor Type: Three-Phase and Direct Current Mounting: Gear Foot Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with hollow shaft Gear Type: SN8BFH Motor Type: Three-Phase and Direct Current Mounting: Flange Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with hollow shaft Gear Type: SN8DSH Motor Type: Three-Phase and Direct Current Mounting: torque bracket Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with hollow shaft Gear Type: SN8FH Motor Type: Three-Phase and Direct Current Mounting: Flange Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with hollow shaft Gear Type: SN9BH Motor Type: Three-Phase and Direct Current Mounting: Motor Foot / Flange Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with hollow shaft Gear Type: SN9BFH Motor Type: Three-Phase and Direct Current Mounting: Flange Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

The right drive solution for every challenge: The SN3VH-gearmotors impresses with its compact dimensions and flexible application range. The geared motors are available as three-phase or direct current versions and can be equipped with brakes or pulse generators (on request). SN3VH-gear types: SN3VH — Motor types: AC (230/400V) and DC (180/200V) — Shaft design: Ø14 Hollow shaft — Ratios: 5; 7; 11; 15; 17; 20; 24; 30; 32; 38; 56; 75 — Power: 120-250W — permissible torques: 11-17 Nm — effectiv torques: 3,2-23 Nm — Additional options: brake motors, UL/CSA-certification, thermal protection, encoder Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.

Single-stage gear drive with hollow shaft Gear Type: SN8SHH Motor Type: Three-Phase and Direct Current Mounting: Gear Foot Ausgangswelle: Hollow Shaft Additional Data: — Ball bearings for motor and gear — Worms hardened and ground — Wormwheel made of special bronze alloy For further information see product detail page.