Snaps - Import export

A snap or retaining ring is a fastener or retaining ring that consists of a semi-flexible metal ring with open ends that can be snapped into place. It fits in a groove on a shaft or inside a bore and locates the shaft axially in one direction.

The twisterchain product line offers a wide range for circular movements and is available in four sizes. Modular in width and radius, therefore flexible in applications where rotary and spiral movements up to 360° and more with high loads and smooth operation are required. The twisterchain applications are available with guide trough, which has the following advantages: guidance of the energy chain, reduced abrasion of the energy chain, optimal operational smoothness, rotation angle up to 360° from stock. - Strong, high fill weights, smooth operation, weight-optimised - Rotary speeds up to 1m/s and more - Circular/spiral movements up to 360° from stock (up to 400° upon request) - Cable-friendly, smooth interior crossbars openable along the inner and outer radius - Successfully tested for over 1 million cycles in the igus laboratory

ideal fastener to assemble permanently two panels.

Use a modern communication tool for your advertising message. You can hang the high-quality silver frame with black front panel from the ceiling. Use the included wire suspension for this purpose. Your double-sided advertising is uniformly illuminated thanks to modern LED technology and a special acrylic diffuser. Give pictures and posters an attractive beam. The black passe-partout of the protective screen create an elegant note. The screen is attached and detached by means of a magnetic holder which eases the media. Use the illuminated customer stopper in retail, advertising agency or exhibition area. The "Ecomag" illuminated frame is supplied with power via a 3.5 metre long cable. The mains plug is used for switching the frame on and off. On request we can offer you a suitable advertising insert.

Our new LED light frame "S-Lite" - the light frame for all that are searching for a lower-priced alternative to our classic LED light frame "Simple".

The elegant, silver anodised aluminium frame with LED backlit surface is the perfect frame for your advertising poster. Select the desired size of our promotional "LED" light frames and mount it in portrait or landscape format with the included hooks. Your advertising message will leave a lasting impression on your customers as it is backlit homogeneously. The rear acrylic diffuser ensures an even distribution of light. Your poster will be protected by a PET cover. The proven click frame technology eases the exchange of your advertising media. Modern and eye-catching, in darkness you direct the views of passing people to your store window. Even in dimly lit hallways and exhibition halls, the illuminated frame delivers your message to potential customers. Use the "Simple" LED light frame in a variety of ways. Advertise for a new cosmetics line, the current cinema film or the next event. The display with special luminosity is powered by a cable attached on the bottom.

Make your POS even more attractive with our range of aluminium snap frames – the universal product offering medium for indoor and outdoor use. Snap frames and pavement stands are light yet sturdy constructions that present your product offerings where they are needed to achieve your sales objectives. A special outdoor profile protects posters against wind and weather in outdoor areas.

Snap-on cap jars

Handy round bottles with snap-action hinged lid, especially suited for cosmetic liquids, emulsions, creams and oils. Sampling possible per portion.

Features adhesive tape, reading angle, dust cover and C-snap

Lid for Urine Cup 125/200 ml, with Spout, Snap Closure

Lid for Urine Cup 125/200 ml, Snap Closure

The sample containers sterile are sterilised by irradiation and correspond to a sterility assurance level Sterile SAL 10-3 (according to ISO 11137) inside. The handy and universally applicable sample jar is easy to fill, smooth-walled and free of undercuts, therefore it can be emptied completely. It is an excellent universal container for all liquid and solid contents. The attached lid of the sample container can be opened with one hand and fixed at a 90° angle. This leaves the other hand free to take samples. Liquid/condensate in the lid runs into a collecting channel integrated in the lid, nothing is lost, nothing can drip off. The sample boxes are closed while hot during production. Due to this process, the sample boxes close absolutely tightly, as the lid and box adapt optimally during the cooling process. The sample container made of PP is highly transparent, the contents of the container can be easily recognised.

The module µCAN.4.ci-SNAP is equipped with 4 fast counters of up to 100 kHz. Additional four I/O terminals can be configured individually as digital inputs or outputs.Counter input / frequency measurement A/B signal Max. input frequency 500 kHz Galvanically isolated fieldbus (option) High precision frequency measurement Signal type freely configurable Up and down counter Screw connection via plug-in connectors Fieldbus CAN Protocol CANopen / Raw CAN

The µCAN.8.pwm-SNAP unit is equipped with 8 outputs which provide pulse width modulated signals (PWM) within the range of 0% to 100% for controlling of actuators (valves etc.)PWM output Basic frequency 40 Hz … 5 kHz Mark-to-space ratio 0.0 % … 100.0 % Galvanically isolated fieldbus (option) Each output to be charged with max. 1.4 A Output drivers can be supplied separately Screw connection via plug-in connectors Fieldbus CAN Protocol CANopen / Raw CAN

The µCAN.8.dio-SNAP is a freely configurable digital I/O module featuring 8 channels. Module ID and bit rate can be set via DIP switch or via CAN bus (LSS, CiA 305). The module supports the protocols CANopen CANopenFD and J1939.

The modul µCAN.4.ao-SNAP features four independent analogue outputs which optionally provide a voltage or a current signal. The CAN interface supports CANopen and J1939 protocols.

The decentralized module µCAN.6.ai-SNAP is designed to acquire up to 6 analogue current / voltage signals and converts them into digital CAN signals.

The module µCAN.1.ti-SNAP is designed to acquire temperature signals via Pt100 or J, K and L type thermocouples.

The module µCAN.1.sg-SNAP is designed to acquire strain gauge measurement signals such as forces, torques, sequences and voltages and transfers them via CAN.

The measurement data acquisition module µCAN.1.ai-SNAP acquires analogue measurement signals and links them to the digital CAN world.

Robust clip frame for quick motif change due to proven folding technique. UV-resistant thanks to low-reflection protective film. • Robust DIN A4 aluminium snap frame, silver anodised • Quick and easy motif change due to proven folding technique • Low-reflection, UV-resistant protective cover • Impact-resistant polystyrene back panel • Mitred corners • Concealed wall mounting holes for screwing on or hanging or permanent attachment with self-adhesive strips supplied • Attachment options for use in portrait and landscape format • Incl. mounting material consisting of screws, dowels and four self-adhesive strips

Info floor stand with rotatable folding frame. With adjustable reading angle. UV-resistant thanks to low-reflection protective film. • Quickly assembled information stand with robust DIN A4 aluminium folding frame, silver anodised • High stability can be ensured by optionally filling the base (diameter: 250 mm) with sand. Additional purchase item DURABLE Sand: Product code 333516. Max. weight approx. 1.1 kg • Round base with enclosed rubber ring prevents scratches on the floor • Height adjustable with telescopic rod (can be adjusted in steps from 770 mm to a maximum height of 1,205 mm in portrait format) • Folding frame can be easily rotated from portrait to landscape format • Reading angle adjustable by ball-and-socket joint • Low-reflection, UV-resistant protective cover • Impact-resistant polystyrene back panel • Mitred corners • Ideal for restaurants, retail, museums, exhibitions, trade fairs, reception and waiting areas, conference rooms etc.

Rotating clip attachment with snap button strap. Compatible with name badges and ID holders. • Rotating clip fastener with snap button strap • Compatible with name badges and ID holders with the corresponding cut-out

Index divider pocket for collecting receipts. With snap-in perforation. • Index divider pocket with snap-in perforation • Ideal for collecting receipts • Tab width: 60 mm • Format: A4 format landscape, 230/240 x 300 mm

Washers for snap-on caps. These rings are applicable for cap type: 66 Material: PA Colours: natural Ring type 69 suitable for DIN 95, 97, 963, 964, 965, 7963, 7972, 7982, 7983, 7991, 7995 ISO 1482, 2009, 2010, 7046, 7047, 7050, 7051, 10642. Dimension A has to match the dimension A of the snap-on caps.

Washers for snap-on caps. These rings are applicable for cap type: 66 Material: PA Colours: natural Ring type 67 suitable for DIN 84, 85, 96, 439, 6912, 7971, 7981, 7984, 7996 ISO 1207, 1481, 1580, 4035. Dimension A has to match the dimension A of the snap-on caps.

Washers for snap-on caps. These rings are applicable for cap type: 66 Material: PA Colours: natural Ring type 66 suitable for DIN 84, 85, 96, 439, 6912, 7971, 7981, 7984, 7996 ISO 1207, 1481, 1580, 4035. Dimension A has to match the dimension A of the snap-on caps.

Washers for snap-on caps. These rings are applicable for cap types: 61, 62, 64 and 65. Material: PA Colours: natural Ring type 65 suitable for DIN 84, 85, 96, 439, 555, 558, 571, 601, 912, 931, 934, 979, 6912, 7971, 7976, 7981, 7984, 7996 ISO 1207, 1481, 1580, 4014, 4016, 4018, 4032, 4034, 4035, 7049. Dimension A has to match the dimension A of the snap-on caps.