µCAN.8.pwm-SNAP
8-channel pulse width modulation output with CAN
Description
The µCAN.8.pwm-SNAP unit is equipped with 8 outputs which provide pulse width modulated signals (PWM) within the range of 0% to 100% for controlling of actuators (valves etc.)
- Electronic data processing - microcomputers
- PWM signal output
- Fieldbus module
- CANbus module
Product characteristics
- PWM output
- Basic frequency 40 Hz … 5 kHz
- Mark-to-space ratio 0.0 % … 100.0 %
- Each output to be charged with max. 1.4 A
- Fieldbus CAN
- Protocol CANopen / Raw CAN
Documents
Manufacturer/ Producer
53844 Troisdorf - Germany
Similar products from MICROCONTROL GMBH & CO. KG - SYSTEMHAUS FÜR AUTOMATISIERUNG
MICROCONTROL GMBH & CO. KG - SYSTEMHAUS FÜR AUTOMATISIERUNG
Germany
At its eight outputs the µCAN.8.pwm-BOX provides pulse width modulated signals (PWM) within a range of 0% to 100% for controlling of actuators (valves etc.). The outlets are overload and short circuit protected. The µCAN.8.pwm-BOX is connected with the central control unit via CAN bus.
MICROCONTROL GMBH & CO. KG - SYSTEMHAUS FÜR AUTOMATISIERUNG
Germany
The module µCAN.4.ci-SNAP is equipped with 4 fast counters of up to 100 kHz. Additional four I/O terminals can be configured individually as digital inputs or outputs.
MICROCONTROL GMBH & CO. KG - SYSTEMHAUS FÜR AUTOMATISIERUNG
Germany
The µCAN.4.sg-BOX is a decentralized measurement data acquisition module for the acquisition of four strain gauges or resistance bridges. The resistance bridge data is acquired at a total sampling rate of 400 Hz.
MICROCONTROL GMBH & CO. KG - SYSTEMHAUS FÜR AUTOMATISIERUNG
Germany
The decentralized module µCAN.4.ao-BOX features four analogue outputs which optionally provide a voltage signal (+/- 10 V) or a current signal (0…20 mA). The CAN interface supports the protocols protocols CANopen and J1939.