Silicone material - Import export

iglidur® D: low cost material with silicon Low-cost-material with low coefficients of friction and good wear resistance at low loads. iglidur® D is available as cylindrical bearings and plain bearings with flange. Low coefficients of friction at high speeds For low loads Very cost-effective Vibration-damping Lowest humidity absorption

Silicone rubber ALWA SIL SH 22 and SH 33 are silicone impression materials. These materials have extremely high mechanical values. In addition, they are very fast to handle and very easy to handle as well. The two-component silicone rubbers cure at room temperature. After mixing the two components, a low viscosity liquid develops, which crosslinks to a resistant and rubber elastic material. During the crosslinking, no exothermic heat is developed. When 1 – 3 % thixotropic agent is added per component, a spreadable mixture is obtained. Area of application: *Flexible casting moulds *Copy moulds *Moulds with undercuts *Polyurethane casting moulds *Concrete casting moulds

We can offer flexible heating elements manufactured from three different insulation materials: silicone, polyimide (Kapton) or polyester. Each of these materials possess different properties which make them suitable for diverse applications. Silicone heaters can also be produced in very large sizes, whereas polyimide is significantly thinner and polyester unbeatable in price when it comes to high quantities. All three of them are bespoke products made according to your needs, so within the bounds of what is technically feasible you as the customer can determine almost every feature of your heater. This can include; voltage, wattage, dimensions, shape, sensors, leads, plus much more. Due to their low thermal mass flexible polymer insulated heaters distinguish themselves by a very short response time and excellent controllability.

Precise atomisation and spraying can be continuous or selective. The revolutionary combination of continuous flask and low-flow spray chamber guarantees perfect spraying of low to highly viscous media with high edge sharpness and minimum overspray. Fields of activity: - Dosing - Coating - Microsputtering - Lubrication - Marking and much more. Materials: - Fats/oils - Colours - Activators/primers - Abrasive materials - Adhesives - Silicones - Solid-laden materials and much more. Advantages: - Constant quantity/area - Uniform spray pattern - Uniform coating - Little overspray/high edge sharpness - Defined volume per revolution - High chemical resistance - High spread - Adjustable round jet - From dot spraying to continuous spraying - Low-maintenance system - flow rate of the medium and atomising air can be regulated independently - High application efficiency

Electromagnetically operated pinch valve PPV 7 (NC) with high flow rates and precise control. The 2/2-way NC pinch valve clamps tubes with a Diameter up to 7mm and depending on the used material (PVC / Silicone) up to 1.5mm wall thickness. It has a clamping force of 42N.

Electromagnetically operated pinch valve PPV 7 (NO) with high flow rates and precise control. The 2/2-way NO pinch valve clamps tubes with a Diameter up to 7mm and depending on the used material (PVC / Silicone) up to 1.5mm wall thickness. It has a clamping force of 42N.

The HTSD-High Temperature Drum Heater is our high temperature drum heater (220 °C) and exclusively suitable for steel drums. The heating jacket is used in areas where large surfaces need heating over 90 °C. This barrel heater is available in four standard sizes (25 / 50 / 105 / 200 liters) and can be manufactured to customer specifications as well. HISD heater jackets are particularly suited to melt soaps, fats, varnishes and oil-based products, or respectively reduce their viscosity. The 200-liter element can be combined with the HBD - base drum heater to reduce the heat-up time. The heating element of the HTSD heating jackets is sewn into a fleece made of silicone-insulated fibreglass material. The insulating outer housing consists of a binder-free mat made of textile glass. The heating element is therefore double insulated (protection class II). An optimal contact with the barrel, as well as a quick assembly and dismantling are achieved by the use of quick release buckles.

The Loresta GX is used to measure conductors and semiconductors in the lower resistance range. Measuring range: 10^-4 – 10^7 Ω. It is used to measure the surface resistivity (Ω / □), the volume resistivity (Ω · cm), electrical conductivity (S / cm) in the low-resistance range. The Loresta-GX works according to the 4-pin measuring method. The method is based on the four-wire method and was developed to eliminate the influence of contact resistance. The measuring heads consist of four needle-like electrodes. To simplify the measurement method and calculate the correction factors, all four electrodes are at an equidistant distance from each other. Conductive Materials: Paints, pastes, paints, printing ink, Smart Textiles, Plastics, rubber Film materials, metallic thin films, metallised films, resistor pastes amorphous silicon / silicon wafer, antistatic materials, EMC shielding materials ...

The 700 VA series float valve allows infinite adjustment of the level and has a flat float rod for mounting variable floats. It is suitable for use at high and low pressure and high temperatures up to 120°C, but not for use in drinking water. The stainless steel float model is suitable for simple mechanical regulation of levels in the food, pharmaceutical and chemical industries due to the VA materials and silicone seals.

ALPHA SHOWCASES - the new display generation Reflection on the essential ☑ Fully demountable ☑ optimal use of materials and components ☑ laminated glass and the patented FRANK connection system ☑ available in three sizes The innovative design is based on the patented FRANK connection technology. This makes gluing and screwing superfluous. The essential detail is the barely noticeable aluminium profile strips, which are precisely inserted into the patented edge profiling of the panes. Sealing materials, such as silicone etc. are not necessary. This facilitates assembly and ensures a long life without maintenance. The freestanding ALPHA showcase, step-in model from Frank, has won in its minimalist design international awards and convinced many directors/curators with its maximum transparency. The discreet lines express the lightness of the construction. Function and design are perfectly balanced in all simplicity. This simplicity is the highest form of perfection.

Cable RTD sensor for plug-in The cable RTD sensors of the TRA-W series are constructed differently and adapted to typical operating conditions. The most important differentiating factor of the cable assemblies is their process connection, the operating temperature range and the insulation material of the connecting cable. Process connection: insertion, fittings: M8, 1/8", 1/4" and 1/2" Execution: insertion variant Temperatur range: -50 … +200°C Material: 1.4404 / AISI 316 L Sheath - Ø: 3, 6 and 8 mm Cable material: PVC, Silicon or Teflon IP protection class: 54

The microDICE™ laser micromachining system leverages TLSDicing™ (thermal laser separation) – a unique technology that uses thermally induced mechanical forces to separate brittle semiconductor materials, such as silicon (Si), silicon carbide (SiC), germanium (Ge) and gallium arsenide (GaAs), into dies with outstanding edge quality while increasing manufacturing yield and throughput. Compared to traditional separation technologies, such as saw dicing and laser ablation, TLS Dicing™ enables a clean process, microcrack free edges, and higher resulting bending strength. Capable of dicing speeds up to 300mm per second, the microDICE™ system provides up to a 10X increase in process throughput compared to traditional dicing systems. Its high throughput, outstanding edge quality and 300mm wafer capable platform enables a true high volume production process, especially for SiC based devices.

SANHA produces capillary fittings of the series PURAFIT® - just like our press fittings PURAPRESS® - from the completely lead-free premium material silicon bronze CuSi. This copper alloy is optimally adapted for the use in drinking water systems as it fulfills the strict legal requirements of the Drinking Water Directive. By using lead-free PURAFIT® capillary fittings, installers can always be certain that they will not be subject to any legal claims in case the lead tolerances are exceeded. Also, lead-free fittings satisfy the market's desire for safe and healthy drinking water installations. PURAFIT® capillary fittings from CuSi are tested and certified by all relevant national and international certification bodies and can be used for a wide variety of applications in the sanitary and heating industry

VSG systems offer a poven and economic solution for the inductive melting of metals or alloys under vacuum or protective gas atmosphere and subsequent casting. Applications: The VSG furnaces can be universally employed for melting and casting under high vacuum or different gas atmospheres in the laboratory or production, e.g. alloying, degassing, purification melting, re-melting processing of noble metals highly pure, highly alloyed steel. • Processing of: ◦noble metals ◦ processing of highly pure, highly alloyed steel ◦ High temperature resistant materials on Fe- Ni- Co- basis ◦ Solar-silicon and other special material ◦ Special- / super alloys

The Mediprene 500M range of TPEs for medical applications includes several transparent grades. These compounds were developed in response to an increasing interest in transparent compounds from the medical market. Mediprene TPE materials are PVC, silicone and latex free, making them allergen free and a viable alternative to PVC based compounds. They offer hardnesses from 30 to 90 Shore A, allowing a wide degree of design freedom. Special Features Good transparency PVC, silicone and latex free Soft-touch appeal 30 to 90 Shore A Coloured, transparent grades Production site accredited to ISO 13485 Sterilizable with gamma, ethylene oxide (EtO) and steam Flexibility over broad temperature range Excellent sealing and adhesion Applications The ability to clearly see through a product to monitor the patient is an important feature for many medical devices such as face masks. Transparent TPEs can also be used in tubing and dental applications. Coloured & transparent In medical devices

The microDICE™ laser micromachining system leverages TLSDicing™ (thermal laser separation) – a unique technology that uses thermally induced mechanical forces to separate brittle semiconductor materials, such as silicon (Si), silicon carbide (SiC), germanium (Ge) and gallium arsenide (GaAs), into dies with outstanding edge quality while increasing manufacturing yield and throughput. Compared to traditional separation technologies, such as saw dicing and laser ablation, TLS Dicing™ enables a clean process, microcrack free edges, and higher resulting bending strength. Capable of dicing speeds up to 300mm per second, the microDICE™ system provides up to a 10X increase in process throughput compared to traditional dicing systems. Its high throughput, outstanding edge quality and 300mm wafer capable platform enables a true high volume production process, especially for SiC based devices.