Sheathed cable - Import export

Use: Designed for soldering or crimping on mineral insulated sheath cable or crimping on insulated wire. Construction: Brass machined, nickel plated insert with 0.1 mm tolerance on the cable OD.

Application: Crimp-insert can be fitted in the entrance hole of the connector. Designed for soldering or crimping on mineral insulated metal sheathed cable or crimping on insulated wire. Construction: • Brass machined insert with 0,1 mm tolerance on the cable O.D. The adapter fits in all standard connectors.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Can be used for 4-wire RTD‘s. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Screw terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Ceramic housing with contacts of original thermocouple materials and 
spring-loaded sockets for reliable contact . • Reverse polarity protection by different contact pin widths. • Oversize screw head for easy wiring. • One-piece housing withstands great stresses. • Housing of high purity alumina oxide.

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Screw terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Easy wire connection through sandwich construction. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Advantage: Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with miniature connector plug CMP-XX and miniature jack CMJ-XX. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact • Easy wire connection through sandwich construction • Reverse polarity protection by different contact pin widths • One-piece housing withstands great stresses • Moulded barriers prevent short circuit • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection

Typical applications: Furnace, boiler and chimney doors, expansion joints, cable sheathing. E-glass is the basic material for isoGLAS®. Texturing guarantees a large storage volume and thus good insulation properties. isoGLAS® products are extremely textile and harmless to health. Available dimension: 3 - 30 mm.

• For cutting copper and aluminium cable with strong rubber or plastic sheathing • Special cutting geometry and precision cutting for a clean cut without any burrs • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Opening of the blade in each position possible • Optimum leverage, easy handling and minimum effort by ratchet action • Made of special steel, high-strength parts that are especially subject to wear and tear are additionally hardened and tempered

The slimline probe LMK 306 with ceramic sensor has been especially designed for the continuous level measurement at confined space conditions. Permissible media are clean or slightly contaminated water and thin fluids. Different cable sheath materials are available in order to achieve maximum media compatibility. Features: — nominal pressure: 0 ... 6 mH2O up to 0 ... 200 mH2O — accuracy: 0.5 % FSO — diameter 17 mm — excellent long term stability — suitable for hydrostatic level measurement e.g. 3/4" pipes — excellent linearity Optional Features: — different cable materials — customer specific versions e.g. special pressure ranges Preferred areas of use: — level measurement at confined space conditions — ground water monitoring — depth or level measurement in wells — drinking water abstraction — level measurement in open and closed tanks

Cable RTD sensor for clamp-on The Cable RTD sensors of the TRA-W series are constructed differently and adapted to typical operating conditions. The most important differentiating factor of the cable sensors is their process connection, the operating temperature range and the insulation material of the connecting cable. Execution: clamp-on variant Process connection: copper block, Teflon coated, Ø 26 x 18 x 15 mm Temperature range: -50 … +200°C Material: copper / Teflon Sheath - Ø: – Cable material: Teflon IP protection class: 54

Cable thermometer using RTDs The cable temperature assemblies of the TRA-W series are constructed differently and adapted to typical operating conditions. The most important differentiating factor of the cable assemblies is their process connection, the operating temperature range and the insulation material of the connecting cable. Execution: clamp-on variant Process connection: copper block, 8 x 10 x 40 mm, with Ø 3mm MI-cable Temperature range: -50 … +300°C Material: copper / stainless steel Sheath - Ø: – Cable material: Elexar ( £ 105 °C) IP protection class: 54

Cable RTD sensor for screw-on The cable RTD sensors of the TRA-W series are constructed differently and adapted to typical operating conditions. The most important differentiating factor of the cable sensors is their process connection, the operating temperature range and the insulation material of the connecting cable. Execution: clamp-on variant Process connection: brass block, 5 x 5 x 25 mm Temperature range: -50 … +150°C Material: brass Sheath - Ø: – Cable material: Tefzel IP protection class: 54

The new UNI Dicht TRI achieves the highest shielding attenuation values over the complete frequency range and convinces with a very high current carrying capacity for the reliable discharge of undesirably high shielding currents. The installation is simple and safe: only the cable sheath has to be removed at the contact point where the shielding braid is to be contacted. As soon as the cable is inserted into the cable gland, the TRI spring makes reliable contact with the cable shield, even in the case of non-circular or off-centre cables. In any case, this type of contacting from PFLITSCH means that the cable shield does not have to be exposed until directly at the connection point in the control cabinet. Because the shielding braid remains 100% intact, maximum shielding attenuation is achieved and the useful signals are transmitted without unnecessary interference from noise signals.

HAWKE 501/453/UNIVERSAL - the only "upgradable" Ex d gland in the world. It offers installers the unique opportunity to upgrade the diaphragm seal to a barrier type gland, whereby a seal is formed around each individual cable core. The HAWKE 501/453/UNIVERSAL Ex d cable gland is suitable for cables that exhibit "Cold Flow" characteristics. It provides a patented diaphragm seal on the cables inner sheath to avoid damage especially of soft and flame retardant cables. Available materials: Brass, Nickel plated brass, Stainless Steel 1.4404, V4A, 316L, Aluminum Types of Protection: Ex db IIC Gb, Ex eb IIC Gb, Ex nR IIC Gc, Ex tb IIIC Db Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC. Explosion-proof acc to ATEX/IECEx Protection grades: IP66, IP67, IP68 (30 metres for 7 days), IP69, Deluge Protected DTS01, NEMA 4X

To be used as halogen free, flame retardant and environmentally power, control and connecting cable in electrical facilities, in fire vulnerable areas and facilities with high concentration of people and proberty values, for fixed laying and flexible applications without tensile stress and without defined cable routing. Suitable for use in dry an humid rooms. Outdoor use only with UV-protection, no laying underground. The copper braided screening prevents electrical and magnetic interference of the control cable with the environment and of the environment with the internal cable cores.c

GLOBALFLEX®-CY-control cables are used in tool-machines conveyor belts, production line in machinery production, in air-conditioning and in steel production for low loss data and signal transmission. They are used for installing in dry, moist and wet rooms, especially under the terms of industrial environment. Outdoor use only with UV-protection allowing for temperature range. GLOBALFLEX®-CY-control cables are suitable for medium mechanical stresses with free movement without tensile stress or forced movements. The high level of screening ensures a high degree of interference protection. the screening density assures disturbance free transmission of all signals and impulses. The product corresponds to the directive 2014/35/EU (low voltage directive).

oddesse-propeller pumps are used for irrigation and drainage of agricultural areas, water-level regulation, oxygen enrichment of breeding water at fisheries, trimming of ships, ferries and tankers and so on. EXECUTIONS - Single-stage centrifugal pumps with open semi-axial impeller - Submersible, rewindable and water-filled motors with protection level IP 68 - Motor cooling through pumped medium that flows around it - Water-lubricated radial and axial slide bearings - Encapsulation of rewindable motor via mechanical seal - Optimal motor filling guaranteed by a volume-compensation system - Rubber-sheathed electrical cable, watertight connected - Continuous operation, switching operation or frequency control - Tandem operation - High-quality materials for application in service, industrial and seawater PERFORMANCE RANGE Delivery volume Q = … 1,000 m³/h Delivery height H = … 24 m

Device details: ■ Measurements according to the standards LV212 und LV122 ■ The twist length of the samples is measured without removing the sheath → this ensures a precise measurement ■ Traditional methods manipulate the sample (cable stripping / unwinding of conductors) → a precise measurement is not possible anymore ■ Via an optional PC connection, the measuring results can directly be exported ■ Fully automatic: By clicking one button, the measuring sensor automatically moves along the sample Results: ■ Result file: It is possible saving the following result data into a text file (export function): ▪ Amount of twists ▪ Measured distance (distance from the first twist to the last overlapping twist) ▪ Driving distance oft he sensor ▪ Minimum / Maximum twist length ▪ Average of the detected twist lengths Calibration: ■ The calibration is performed with an especially designed master-sample (calibration piece)

Device details: ■ Robust case seals against extraneous light ■ Central control unit ■ Semi-automatic focussing and illumination ■ Safe from impacts and vibrations ■ Quasi shadow free transmitted light ■ Optimal system status for lighting, optics and camera ■ A measurement with 2 cameras is possible ■ Adjustable operation distance for 2D measurements in laboratories ■ Very precise measurement due to high resolution sensors ■ Standardised individual components ■ Very easy measuring procedure ■ Measurement according to IEC 60811 -201, -202, -203 ■ Suitable software FMC-3 and CAQ-System ProCable available

The cable measuring device VCPX5 is designed for geometrical measurements for core insulations and cable sheaths. Due to the robust construction and the very easy operation, the VCPX5 is especially suited for use in production processes as a quick, accurate and secure measuring solution. A specialty of the device is its high resolution of up to 2µm, which easily enables measurements according to the standards IEC 60811-201; 202; 203 [previous version = IEC 60811-1-1]. The VCPX5 stands out due to its high measuring range flexibility. Cable samples with an outer diameter from 0 – 130 mm can easily be measured automatically and quickly. The optimally pre-set optics as well as the pre-set sample illumination reduce the user influence to a minimum. Due to the excellent accuracy and repeatability, easy operation as well as the reasonable price, cable manufacturers are able to reduce costs immediately.

TKD | 07 Rubber Cables Flexible Power supply & Control Cable for applications with high mechanical requirements. ( e.g. automotive industries, shipbuilding, machine tool building mining and industries, in quarries and on construction lots.) - Light and middle rubber-sheathed flexible cables - Heavy rubber-sheathed flexible cables - Welding cables - Special rubber cores - for permanent use in water Excerpt of versions: > flat & round > shielded, unshielded > with and without supporting element > UV-resistant, Oil-resistant Excerpt of products: H05RR-F - H05RN-F - H07RN-F - H07RN-F PREMIUM - NSSHÖU H01N2-D - H01N2-E - NSGAFÖU - NSHXAFÖ

Used as control cables and supply lines in machine engineering, plant engineering, enameling lines, power stations, air conditioning, cool systems, office machines and data precessing systems. Mainly suitable for dry, damp or wet interiors, especially in industrial environments at medium mechanical stress. Outdoor use with UV-protection only and in observance of the temperature ranges. Suitable for free, not continously returning movement without tensile stress or compulsory guidance as well as for fixed laying. GLOBALFLEX®-COLD is mainly used for cold-flexible applications due to cold-resistance up to -30°C.