Sheathed cable - Import export

Areas of usage: Digital Multiplex cables are used to control smart lighting equipment and special effects devices in areas such as theatres, professional stages, bars

Areas of Usage: These cables are designed to provide communication between devices can be used in many areas from control engineering to security systems.

PE-FOAM SKIN INSULATED, STAR-QUADS, WITH REINFORCED SHEATH The cable is designed for use as railway signalling cable, preferable for the connection of railway connection boxes

Low-smoke, zero-halogen, flame-retardant power cable. For fixed indoor installation as well as in concrete, but not for direct burial in ground or application in waterThe aluminum cores with section 2,5-50mm2 inclusive are produced with one wire of 1 class flexibility, 70-240mm2 inclusive with twisted multi-core wires 2 class flexibility, according to standard IEK60228 : 2004. According to customer requested, it’s possible to produce cross sections 16:50 with multi-core wires. Number of cores in the cable 1,2,3,4,5in case of supply in bundles the construction length is agreed with the customer. In case of agreement with the customer cables of different construction lengths can be producedLabel attached to wooden drum or bundle, or in case of request of the customer with inscription on top: “JSC Sakcable” cable brand, date of production. Labeling of resistance cores with colors or with numbers

For transmission and distribution of electric power at stationary devices with rated voltage 0,660kV and 1 kV frequency 50Hz. For stretching in the air where there is no danger of mechanical damage of the cable, also for laying into channels without influence of stretching forcesThe aluminum cores with section 2,5-25mm2 inclusive are produced of single wire of 1 class flexibility according to Gost standard 22483-2012. Number of cores in the cable 2,3.The aluminum cores with section 2,5-25mm2 inclusive are produced of single wire of 1 class flexibility according to Gost standard 22483-2012. Number of cores in the cable 2,3.

Low-smoke, zero-halogen, flame-retardant building wire for installation on and under plaster, in cable ducts and conduits. For indoor use onlyCopper wire cross-section 1.5-6mm2 are made with single-core with 1 class flexibility, according to the standard IEK60228:2004; Cross-section 16:35mm2 are made of twisted multi-core with 2 class flexibility, according to the standard IEC60228:2004. Cable is round. It’s possible to Production with flay constructionThe insulated cores are made of different colors, an inscription is made on the cover of the conductor “JSC Sakcable” cable brand, year of production. The wires differ by insulation color or by digits.

Use: Designed for soldering or crimping on mineral insulated sheath cable or crimping on insulated wire. Construction: Brass machined, nickel plated insert with 0.1 mm tolerance on the cable OD.

Application: Crimp-insert can be fitted in the entrance hole of the connector. Designed for soldering or crimping on mineral insulated metal sheathed cable or crimping on insulated wire. Construction: • Brass machined insert with 0,1 mm tolerance on the cable O.D. The adapter fits in all standard connectors.

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Ceramic housing with contacts of original thermocouple materials and 
spring-loaded sockets for reliable contact . • Reverse polarity protection by different contact pin widths. • Oversize screw head for easy wiring. • One-piece housing withstands great stresses. • Housing of high purity alumina oxide.

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Screw terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Can be used for 4-wire RTD‘s. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Screw terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Easy wire connection through sandwich construction. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Advantage: Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with miniature connector plug CMP-XX and miniature jack CMJ-XX. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact • Easy wire connection through sandwich construction • Reverse polarity protection by different contact pin widths • One-piece housing withstands great stresses • Moulded barriers prevent short circuit • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection

Typical applications: Furnace, boiler and chimney doors, expansion joints, cable sheathing. E-glass is the basic material for isoGLAS®. Texturing guarantees a large storage volume and thus good insulation properties. isoGLAS® products are extremely textile and harmless to health. Available dimension: 3 - 30 mm.

Housing aluminium. Cable sheath PVC. Version Compact sensor and plug design. Flat connector, 8pole, 1x pin. Connection cable, 6wire, ø 3.55–0.3 mm. Cable bend radius, > 17 mm (static). Note Works with magnetic tapes 21725. The reading distance between the sensor and tape must be 0.1 to 2 mm. The sensor is supplied with operating voltage and draws current via the electronics. System accuracy, repeat accuracy and travel speed is dependent on the electronics. Plugin connection to position indicators 21700 and 21702. Technical data Rating IP 67; EN 60529 (sensor head) Shock resistance 2000 m/s², 11 ms; EN 60068227 Vibration resistance 200 m/s², 50 Hz–2 kHz; EN 6006826 Temperature range Ambient temperature 0…60°C Storage temperature 10…70°C Assembly Installation must be carried out using the enclosed user information. A, reading distance sensor/tape ≤ 2 mm B, lateral offset ± 2 mm C, misalignment ± 3° D, pitch gradient ± 1° E, lateral gradient ± 3°

Areas of Usage: This type of cable whose outer sheath consists of highly flexible PVC and core conductors made of oxygen-free stranded copper, can be used safely in studio and hi-fi systems.

This type of cable whose outer sheath consists of HFFR compound and core conductors made of oxygen-free stranded copper, can be used safely in studio and hi-fi systems.

This type of cable whose outer sheath consists of HFFR compound and core conductors made of oxygen-free stranded copper, can be used safely in studio and hi-fi systems.

This type of cable whose outer sheath consists of HFFR compound and core conductors made of oxygen-free stranded copper, can be used safely in studio and hi-fi systems.

This type of cable whose outer sheath consists of HFFR compound and core conductors made of oxygen-free stranded copper, can be used safely in studio and hi-fi systems.

Areas of Usage: This type of cable whose outer sheath consists of highly flexible PVC and core conductors made of oxygen-free stranded copper, can be used safely in studio and hi-fi systems.

Areas of Usage: This type of cable whose outer sheath consists of highly flexible PVC and core conductors made of oxygen-free stranded copper, can be used safely in studio and hi-fi systems.

Areas of Usage: This type of cable whose outer sheath consists of highly flexible PVC and core conductors made of oxygen-free stranded copper, can be used safely in studio and hi-fi systems.

Areas of Usage: This type of cable whose outer sheath consists of highly flexible PVC and core conductors made of oxygen-free stranded copper, can be used safely in studio and hi-fi systems.

This type of cable whose outer sheath consists of HFFR compound and core conductors made of oxygen-free stranded copper, can be used safely in studio and hi-fi systems.

Areas of Usage: This type of cable whose outer sheath consists of highly flexible PVC and core conductors made of oxygen-free stranded copper, can be used safely in studio and hi-fi systems.

• For cutting copper and aluminium cable with strong rubber or plastic sheathing • Special cutting geometry and precision cutting for a clean cut without any burrs • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Opening of the blade in each position possible • Optimum leverage, easy handling and minimum effort by ratchet action • Made of special steel, high-strength parts that are especially subject to wear and tear are additionally hardened and tempered

The slimline probe LMK 306 with ceramic sensor has been especially designed for the continuous level measurement at confined space conditions. Permissible media are clean or slightly contaminated water and thin fluids. Different cable sheath materials are available in order to achieve maximum media compatibility. Features: — nominal pressure: 0 ... 6 mH2O up to 0 ... 200 mH2O — accuracy: 0.5 % FSO — diameter 17 mm — excellent long term stability — suitable for hydrostatic level measurement e.g. 3/4" pipes — excellent linearity Optional Features: — different cable materials — customer specific versions e.g. special pressure ranges Preferred areas of use: — level measurement at confined space conditions — ground water monitoring — depth or level measurement in wells — drinking water abstraction — level measurement in open and closed tanks