Seal systems - Import export

Our ACP Group offers over 400 different variants of stamped and lanced metal carriers. These carriers are used in a wide variety of sealing systems. Only high-quality raw materials such as steel, aluminium and stainless steel from certified suppliers are used for production. The Huehoco Group also offers a wide range of coating options. From functional to decorative coatings, our customers can choose from a wide range of products. We offer suitable bonding agents for almost all types of rubber and plastic compounds.

FULLY AUTOMATIC FILLING, SEALING AND FINISHING SYSTEM, Complete transport format set 12-fold stepped jar transport with mehanical overload coupling Electrical connections for the integration of an inductive sealing unit (see options) Filling unit with turnstyle slide dosage aggregate 40 l filling funnel Electronic volume adjustment Foil dispenser with pre-sealing Thermal conductive sealing unit Automatic central lubrication (low maintenance) Integrates transport belt Protective glazing in aluminium / Makrolon(R) Central cntinuou height adjustment of belts and guides via manual wheel Integrated screwing unit Integrated PLC control Siemens S7

The BaCo 2500 Variospeed is a fully automated filling, foil application and sealing machine, suitable for creamy to liquid filling media for plastic, tin or glass containers. Available performance versions: 2.500 units/h, 3.000 units/h or 3.500 units/h. all gearboxes are maintenance-free: Lenze main drive, Atek gearbox, Miksch stepping gear various cams on drive shafts of the gearbox: filling cam, control cam for valves, pre-sealing cam, lever arm for driving the metering pump and dispenser drive shafts with prockets for chain drives central lubricating system 8-up turntable with mechanical overload clutch backlog detector and monitor for incoming and outgoing containers filling unit with turntable metering unit 40 liters filling funnel dispenser with pre-sealing thermal sealing unit (conductive) integrated conveyor belt central, stepless height adjustment of conveyors and guides by a handwheel integrated SPS control system Siemens S7

The BaCo 1800 is a fully automated foil application and sealing machine, suitable for plastic, tin or glass containers. mobile base frame feed conveyor with feed control synchronised star wheel stand with receptacles for the containers as form parts adjustable outer ring for guiding containers through the machine sequence foil magazine for stackable pre-cut Ballerstaedt seals pneumatically driven foil dispenser with a precise, maintenance free 180° reverse gear for removing the seals from the magazine, applying them to the sealing edge and fixing them with a pre-sealer sealing station for closing the containers with regulation of the sealing temperature, pressure and time for optimal setting of the seal parameters, conductive, optional also inductive exit conveyor for the containers central height adjustment of the magazine plate to adjust it to the respective container height all-over protective coating control panel with electrical supply unit

The BaCo 2400 is a fully automated, linear motor driven, filling, foil application, foil sealing and capping machine, suitable for creamy to liquid filling media. Capacity: 35-40 pcs per minute Available versions: Fill/Seal, Fill/Cap, Seal/Cap, Fill/Seal/Cap machine frame from aluminium profile indexing transport system for jars horizontally working conveyor for jar infeed and discharge position control for jars in indexing rotary transport dosing pump from 1.4404 10 l hopper with level control filling nozzles driven by LinMot-e-motor pick and place system for pre-cut foils from magazines driven by LinMot-e-motor 1 spot sealer to fix the foil at the sealing rim of the jars sealing system with conduction sealing head capping station with LinMot-e-motor infeed conveyor for caps electric cabinet with operation panel manual central lubrication system safety doors with aluminium profile frame and windows from makrolon

For companies from the construction supply industry, we manufacture among others insulating mat holders and plastic dowels in a variety of lenghts. In the sanitary sector, our portfolio/range varies from drainage components through radiator holders in individual parts as well as complete modules to plastic parts for shower cubicles. We also produce components for sealing systems for windows and doors.

The Furnace Tracker Sealed Quench Systems from Fluke Process instruments feature the Datapaq TP6 data logger, a sealed & quenchable thermal barriers from the SQ00 range, thermocouples and our intuitive Insight™ software to create a complete solution. This system is designed specifically for the aluminum solution heat treatment process. The system features a fully sealed design incorporating a pressure relief system, which allows for the most efficient insulation and enables the system to travel through every stage of your process. It can also be used in other solution heat treatment processes up to 900°C (1652°F) such as that for Titanium. Data Logger The Datapaq TP6 is the perfect solution for the most demanding high-temperature profiling applications with a 316-grade machined stainless-steel case and IP67 rating. Once combined with the Datapaq Insight™ Software, you can display information from the data logger

The function of gaskets is to prevent the leakage of medium outside the equipment. Static seals are used in many applications such as plumbing and heating systems, sealing fasteners, containers and pipeline construction. They are washers, rings or frames which generally are adapted to the whole width of the sealing surface. They can be used for example in flange connections of pipelines, pumps, motors, valves, etc. The gaskets are made of various materials such as: Rubbers, fiber plates, synthetic plates, graphite, PTFE, etc.

Kaplan turbines are typically used for river power plants on calm waters. The blade angle runner blades (Kaplan blades) is adjustable. The pressure of the water flow, which is controlled by the guide vanes of the upstream wicker gate, can then be efficiently converted into energy. The bidirectional MANOY® system seal WP, type 444, in the form of a continuous ring was developed to protect the hydraulic adjustment device and prevent hydraulic fluid leakage. Type 449 is particularly useful for maintenance work because rather than being continuous in circumference, the seal is open and has a guide blade.

Penstocks are used to discharge the headwater from a reservoir. Due to thermal and dynamic effects on the pipelines which are usually run underground in the mountain, compensation for expansion is necessary. By fitting an expansion joint, slow creep movements, eccentricity, dilation and also pipe misalignment can be reliably absorbed. The MANOY® system seal WP, type 436, was specially developed for leakagefree operation of an expansion joint.

Spherical valves are installed upstream of the turbine as shutoff devices specifically for high pressures at the end of the penstock. Their main function is to close off the penstock during normal shutdown or load shedding of the turbine. The seal is a metal sliding ring which is generally moved by water hydraulics. The MANOY® system seal WP, type 434 (outer sealing) and the inner sealing type 439, were developed for sealing of the sliding ring. The profile dimensions can be customized for maintenance or specific requirements.

Pelton turbines are used in hydropower plants with a high head. The sealing system specifications are equally high.Control of the turbine output is infinitely variable from part to full load by adjusting the nozzle spear valve. The control unit for linear adjustment of the jet needle can be protected against water and silt infiltration by the MANOY® system seal WP. Types 466 and 486 (both inner sealing) were specially developed for these applications. Types 461 and 481 are for outer sealing configurations. In the context of design, types 481 and 486 must have a split housing. All versions can be supplied with customized profile dimensions for existing groove designs.

The guide vanes control the inflow of water in turbines. These vanes run in sliding bearings. To give the bearings longer term protection from water infiltration, the inner sealing MANOY® system seal WP, type 428, was developed for standard specifications. Type 487 with integral scraper was designed for high specifications due to abrasive constituents in the water and/or long inspection intervals. The housing for this seal must be open. The profile dimensions of both versions can be customized to adapt to existing groove designs.

Pivot pins are found on shutoff devices such as spherical valves, butterfly valves, hollow jet valves and plunger valves. These valves are generally used for opening and closing and occasionally to control the flow rates by oscillating movement. The greaselubricated sliding bearing is protected against water infiltration by a seal on the inside. The seal also prevents the grease leaking into the inside to prevent water contamination. The MANOY® system seal WP, type 418, was developed for this application. To prevent leakage of grease from greased bearings, the unidirectional MANOY® system seal WP, type 456, is also installed.

The MANOY® U‑Cup is a pressureactivated sealing system. This means that the total sealing force is only ever as high as required to seal the prevailing pressure. This friction optimization saves energy.The MANOY® U‑Cup seals gases and liquids and also highviscosity fluids and pastes in a nonstandard version

The MANOY® U‑Cup is a pressureactivated sealing system. This means that the total sealing force is only ever as high as required to seal the prevailing pressure. This friction optimization saves energy. The MANOY® U‑Cup seals gases and liquids and also highviscosity fluids and pastes in a nonstandard version

Large bore dimensions High torque Topclass seal system Special types High misalignments

The highpressure pumps of the 2series with operating pressures up to 750 bar and volumetric flow rates up to around 230 l/min are ideal for cleaning pipes and tube bundles, containers and containers.The seal system of this plunger pump is very easy to maintain due to fewer wearing parts. The ceramic plungers used are highly resistant to acid and alkaline liquids. The 2series impresses with a good price/performance ratio due to long service lives – even in rough everyday work.

The pumps of the 3 series deliver operating pressures up to 250 bar and volumetric flow rates of up to 400 l/min and are the preferred choice in channel and tube cleaning applications.The seal system of this plunger pump is very easy to maintain due to fewer wearing parts. The ceramic plungers used are highly resistant to acid and alkaline liquids.

The PD200 is a professional impulse current measuring system to detect leak (holes) in non-conductive sealing systems and is suitable for leak detection on balconie, pond liners/swimming pools or flat roofs. In contrast to the previous model PD100, the PD200 has extremely compact dimensions - the size of the device could be reduced by more than 30%! These compact dimensions enable the transport of the PD200 e.g. through so-called safety ladders to the corresponding flat roof.The impulse current measuring system easily wins the weight comparison with its previous model. Although the single components partially are pretty heavy (e.g. the transformer), the total weight could be reduced by about 20% (from 11.2 kg to 8.6 kg). On top of the housing there are clearly visible signal lamps - one standard impulse signal (green) and one short-circuit signal (red), incl. integrated tone generator.

Valve Technology Force range max. 180 N Stroke 20 mm Universal and tailor made: ACE industrial gas push type springs of the NEWTONLINE family offer perfect support of muscle power with forces from 10 to 13,000 N with body diameter of 8 to 70 mm. With their high quality features the NEWTONLINE gas springs form the industry standard. These durable and sealed systems are ready for installation, maintenance-free and filled with pressurised nitrogen gas. They are supplied filled according to individual customer pressure requirements and maybe adjusted later by use of the inbuilt valve. The free of charge ACE calculation service designs the gas springs with mounting points specifically for the particular application. A variety of additional components makes assembly even easier and allows universal application of the gas springs.

Valve Technology Force range max. 100 N Stroke 20 mm Universal and tailor made: ACE industrial gas push type springs of the NEWTONLINE family offer perfect support of muscle power with forces from 10 to 13,000 N with body diameter of 8 to 70 mm. With their high quality features the NEWTONLINE gas springs form the industry standard. These durable and sealed systems are ready for installation, maintenance-free and filled with pressurised nitrogen gas. They are supplied filled according to individual customer pressure requirements and maybe adjusted later by use of the inbuilt valve. The free of charge ACE calculation service designs the gas springs with mounting points specifically for the particular application. A variety of additional components makes assembly even easier and allows universal application of the gas springs.

Valve Technology Force range max. 100 N Stroke 20 mm Universal and tailor made: ACE industrial gas push type springs of the NEWTONLINE family offer perfect support of muscle power with forces from 10 to 13,000 N with body diameter of 8 to 70 mm. With their high quality features the NEWTONLINE gas springs form the industry standard. These durable and sealed systems are ready for installation, maintenance-free and filled with pressurised nitrogen gas. They are supplied filled according to individual customer pressure requirements and maybe adjusted later by use of the inbuilt valve. The free of charge ACE calculation service designs the gas springs with mounting points specifically for the particular application. A variety of additional components makes assembly even easier and allows universal application of the gas springs.

The AViTEQ Hopper discharge unit is used below hoppers, silos, bunkers or bulk containers for flowable bulk materials and serves as a combined closure, discharge, transportation and metering device. It is used where high material flows are required. Short hopper discharge units are mounted directly below the bulk hopper. Depending on the bulk material, the discharge unit can be fitted with appropriate protective linear and sealing systems. Advantages & benefits robust design and therefore long-lasting variable feeding speed with magnetic vibrator for optimal dosing to the process bunker closure without additional barriers arrangment central below the bunker run, simple and professional installation possible upon request, in a dust-tight design to save the environment Construction The main components are: conveyor bunker shoe for product guiding inside the feeder drive elastic support elements optional: flexible sealings optional: needle or blade gate for closing Selection The s

The ROTOKOMBI system allows all rotary union and slip ring types to be combined. The result is a complete rotary transmission system from a single source, with perfectly matched interfaces. ROTOKOMBI systems ensure that an optimally adapted sealing system is available for any medium. For any type of electrical transmission a corresponding system is selected to ensure adequate reliability. Thanks to the modular design, individual components can be replaced, retrofitted or upgraded as necessary. All components are selected and combined to meet your specific demands, without limitations to the number of electrical poles, media or size. Special solutions such as ATEX/IECEx or certifications according to UL/CSA regulations are also available on request.

INOX cooling system tight can be used in vehicles, motorcycles and boats. The product seals the water-cooling circuit system in the event of leaks and cracks.

For Property service connections Advantage:Installation of casing and medium pipes for all utilities (gas, water, sewage, power, communication and fibre optic cables) with direct pipe installation for all common pipe types 15 – 20 m through the front garden without the need for trenches Advantage:No trench – no subsequent reinstatement, staircases, garden walls and other surface obstacles are simply bored beneath The GRUNDOMAT can be launched directly from inside of the building Advantages: No access hole in front of the building, shorter installation times, lower costs Wall ducts from our system partner (building seals by our system partner) Advantage: Reliable sealing of the cored brickwork walls (secure sealing of masonry) Several property services connections can be established in one day. Advantage: Greater efficiency, lower costs

The innovative precision-volume-dispenser eco-PEN700 made by ViscoTec offers a wide range of applications for low to medium-viscosity dispensing. preeflow® eco-PEN is a rotating and perfectly pressure-tight displacement system. Self-sealing rotor/stator design. Conveyance action by medium displacement in the stator through controlled rotor rotation. Safe conveyance without any modification of the medium. With its suck back option, preeflow® ensures clean and controlled material or medium cut-off while preventing post-dripping effects.

Filling and sealing machine – Autotwin → Filler and sealer stand next to each other Machine performance: 25 – 30 jars/min Special features: Film applicator station Sealing station (optional induction sealing system for glasses) Separate dosing unit