Pitched roof - Import export

Optigrun Anti-Slip System N is used on roofs with 15 - 45° roof pitch, if needed in combination with Optigrün Fastening Profile.

Optigrun Drainage Board FKD 58SD is used for pitched roofs with a pitch in between 15° and 35°. Made from expanded polystyrene.

Optigrun Anti-Slip System T for green roofs with roof pitches ranging from 15 to 45°; load distribution against the eaves.

Optigrun Anti-Slip System for green roofs with roof pitches of up to 45°; with thrust thresholds and stainless steel cables.

Optigrun Pitched Roof Board FKD 58SD is used for pitched roofs with a pitch in between 15° and 35°. Made from expanded polystyrene. With precisely fitting Z-fold on top and bottom edge and lateral indentations for safe shear stress transfer in direction of the water flow; no possibility of substrate reaching the protective layer thanks to tight fit of horizontal and lateral edges. The integrated chambers provide excellent anti-slippage for the substrate, high water storage capacity and an integrated water distribution system. Lay out according to manufacturer informations with max. 80 mm overfill (incl. vegetation mat).

Optigrun rot-proof Vegetation Mats are used for extensive pitched roofs or wind up-lift protection.

Optigrun Seed Mix EKR/EGR for the nature roof system structue (also pitched roof). Must be used in conjunction with sedum shoot seeding (then 50 g/m²). EKR herb version: approx. 30 herb species EGR grass version: approx. 9 grass species For extensive green roofs (also pitched roof)

Optigrun Structured Storage Fleece SSV 800 is used as a protection fleece for pitched roofs with a combined functionality of water storage and drainage.

Optigrun Extensive Multi Layer Substrate E-heavy is used as a vegetation substrate for extensive green roofs with a multi-layered build-up, for pitched roofs with roof pitch > 5° and for roofs with high load capacity/reserve; suitable for a broad plant species diversity.

Optigrun Protection and Drainage Board FKD 60BU under public roofs with and without roof pitch, filled with Drainage Material Perl 8/16 or chippings 2/5Under public roofs with and without roof pitch, filled with Drainage Material Perl 8/16 or chippings 2/5 Suitable for non-pitch roofs Rapid draining of excess water Vapour permeable - suitable for inverted roofs Lightweight super structure with high drainage capacity Surrounding edge overlaps Filling without risk of shifting apart Cross and T-joints possible - minimal offcuts

Perforated gravel retainer L-section as border of a green roof. Fixed to the roof membrane. For roof pitches of up to 5°.

Perforated Edge Trim L-section as border of a green roof. Fixed to the roof membrane. For roof pitches of up to 5°.

Optigrun Lawn Substrate R is used preferably for lawn areas and intensive multi-layered green roofs with a roof pitch of 0 - 20°.

Optigrun Drainage and Storage Board FKD 25 for use on extensive green roofs with single- or multi-layer construction and under path surfaces (can be walked on).On flat roofs up to 5 % roof pitch In a triple-layer structure with filter fleece FIL 105 and extensive multi-layer substrate E Under thin-layer pedestrian pathways in gravel beds without bedding material The large naps can face either downwards or upwards Suitable for non-pitched roofs Suitable for use on inverted roofs With water reservoir

Infiltration trough made of recycled PP intended for surface drainage in combination with a Flow Control System; high water retention potential, used for extensive green roofs with 0° roof pitch.

Railing system secured by superimposed load for installation on private or public flat roofs with a pitch of up to 3°. System with a patented adjustable foot that permits exact 3D positioning of the posts when applied to roofs with varying pitches.

L-section for separation of gravel and substrate. Simple installation due to click-connection system. Installed on protection membrane, drainage elements or filter fleeces; connectable to water conduit systems. For roof pitches of up to 5°.

Perforated Edge Trim L-section as border of a green roof. Fixed to the roof membrane via aluminium connection elements. For roof pitches of up to 5°.

The drainage gutters are suitable for all applications in which excess water needs to be drained quickly and in a targeted manner: terraces, façades and other rising components, as well as around the eaves of pitched roofs. Gutters are particularly crucial with barrier-free designs. They are made of galvanised steel or stainless steel and are available in various lengths, heights and cross-sections.For drainage surface water from pavements, e.g. in inspection chambers above drainage outlets For draining driving rain on façades Fixed height or height-adjustable Available with many different covers Various accessories such as branch lines and end caps

Optigrun Intensive Substrate Urban Soil is used as a vegetation substrate for intensive multi-layered green roofs. Specifically designed for growing vegetables and berry bushes on garden roofs with 0 - 5° roof pitch.

Optigrun Triangle Maxi Inspection Chamber TMK suitable for negative pressure drainage. Combinable with Triangle and TSK water discharge systems. Drainage capacity for 2 % roof pitch and profiles connected to all four sides: 24 l/s. Extendable in 50 and 100 mm increments.

Optigrun Drainage and Storage Board FKD 60BO under intensive roof greening in multi-layer construction and temporarily drivable gravel lawn without gravel base layer filled with Drainage Material Perl 8/16Under intensive roof greening in multi-layer construction filled with Drainage Material Perl 8/16 Under temporarily drivable gravel lawn without gravel base layer filled with Drainage Material Perl 8/16 Unfilled installation under intensive roof greening is possible with a substrate height of up to 400 mm in combination with Optigrün Filter Fleece FIL 300 (it is not possible for vehicles of any kind to drive over the unfilled Optigrün Drainage and Storage Board FKD 60BO) Suitable for non-pitch roofs Rapid draining of excess water Vapour permeable - suitable for inverted roofs Lightweight super structure with high drainage capacity Surrounding edge overlaps Filling without risk of shifting apart Cross and T-joints possible - minimal offcuts

Extra lightweight, pressure-resistant drainage material under intensive green roofs with or without water accumulation, for 0° - 5° roof pitch. Particularly suitable for terrain modelling with very high layer structure heights and severely restricted load reserves for the ceiling construction.

Extra lightweight, pressure-resistant drainage material under intensive green roofs with or without water accumulation, for 0° - 5° roof pitch. Particularly suitable for terrain modelling with very high layer structure heights and severely restricted load reserves for the ceiling construction.

Infiltration trough made of recycled PP intended for surface drainage in combination with a Flow Control System; high water retention potential, used for intensive green roofs with 0° roof pitch and varying layer heights.Base plate with load-distributing structure For temporary and/or permanent storage of rainwater with regulated water discharge through a Flow Control System High compressive strength With freely flowable structure for quick distribution of rainwater within the retention room Suitable for inverted roofs (when used on inverted insulation, no permanent water storage is possible

This temporary guard rail system was specially designed for pitched and flat roofs and is simply hooked onto the gutter or parapet. Any force exerted on it is distributed through its special facade supports. This lightweight guard rail, which is made of high-quality aluminium material, weighs less than 10 kg per meter. EN 13374:2013, C Designed for temporary usage Also suitable for overhanging roofs ≤ 1 m Lightweight and easy to transport Can be easily adapted to fit your architecture

Simply install this stainless steel anchorage point - which includes a welded-on supporting tube (Ø 42 mm) - on a pitched roof surface. The flexible crossbar, which is screwed onto a wooden beam, allows you to adjust it according to the roof pitch. It is installed using the 4 stainless steel screws supplied and then sealed up using a standard antenna tile. EN 795:2012, A + CEN/TS 16415:2013 Designed for load-bearing wooden structures Minimum beam dimensions: 60 mm x 120 mm Adjustable angle and crossbar position Installation materials included

If you are looking for an unobtrusive anchorage point to secure up to 3 individuals, simply attach this stainless steel anchor loop (Ø 5 mm) to a wooden beam. Once installed on a pitched roof, this anchorage device is virtually invisible. All you need for quick-and-easy installation are the 2 stainless steel screws provided. EN 795:2012, A + CEN/TS 16415:2017 Virtually invisible anchorage loop Designed for load-bearing wooden structures The loop is simply screwed onto a wooden rafter (also suitable for over-rafter insulation) Minimum rafter dimensions: 60 mm x 120 mm

Install this stainless steel anchorage point (Ø 16 mm) - specially-designed for flat roofs (max. 10° pitch) - on bitumen or fabric-reinforced plastic sheeting without penetrating your roof surface - and without the need for extra weights. The crossbars, which are made of high-quality, lightweight aluminium, ensure that the force is reliably distributed whilst keeping the weight down. Meets the requirements of EN 795:2012, A + CEN/TS 16415:2013 Designed for flat roofs with a pitch of up to 10° Min. 15 m² roof space required Fused to a bitumen/fabric-reinforced plastic membrane Penetration-free installation - no extra weights required