Pitched roof - Import export

Bonded to STIFERITE GT panels with various type of bitumen membranes GT 3 bonded to bitumenous membrane polymer of 3 kg/m², reinforced in fibre glass GT 4 bonded to bituminous membrane of 4 mm, reinforced in TNT polyester GT 5 bonded to bitumenous membrane of kg/m², reinforced in TNT polyester and slate chips’ finish The bonded panels GT 3 GT 4 GT 5 are suggested for insulation and as a waterproofing primer of flat and pitched roofs. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

Optigrun Drainage Board FKD 58SD is used for pitched roofs with a pitch in between 15° and 35°. Made from expanded polystyrene.

Optigrun Anti-Slip System T for green roofs with roof pitches ranging from 15 to 45°; load distribution against the eaves.

Optigrun Anti-Slip System for green roofs with roof pitches of up to 45°; with thrust thresholds and stainless steel cables.

Optigrun Anti-Slip System N is used on roofs with 15 - 45° roof pitch, if needed in combination with Optigrün Fastening Profile.

Optigrun Pitched Roof Board FKD 58SD is used for pitched roofs with a pitch in between 15° and 35°. Made from expanded polystyrene. With precisely fitting Z-fold on top and bottom edge and lateral indentations for safe shear stress transfer in direction of the water flow; no possibility of substrate reaching the protective layer thanks to tight fit of horizontal and lateral edges. The integrated chambers provide excellent anti-slippage for the substrate, high water storage capacity and an integrated water distribution system. Lay out according to manufacturer informations with max. 80 mm overfill (incl. vegetation mat).

Optigrun rot-proof Vegetation Mats are used for extensive pitched roofs or wind up-lift protection.

Optigrun Seed Mix EKR/EGR for the nature roof system structue (also pitched roof). Must be used in conjunction with sedum shoot seeding (then 50 g/m²). EKR herb version: approx. 30 herb species EGR grass version: approx. 9 grass species For extensive green roofs (also pitched roof)

Optigrun Structured Storage Fleece SSV 800 is used as a protection fleece for pitched roofs with a combined functionality of water storage and drainage.

Optigrun Extensive Multi Layer Substrate E-heavy is used as a vegetation substrate for extensive green roofs with a multi-layered build-up, for pitched roofs with roof pitch > 5° and for roofs with high load capacity/reserve; suitable for a broad plant species diversity.

Optigrun Protection and Drainage Board FKD 60BU under public roofs with and without roof pitch, filled with Drainage Material Perl 8/16 or chippings 2/5Under public roofs with and without roof pitch, filled with Drainage Material Perl 8/16 or chippings 2/5 Suitable for non-pitch roofs Rapid draining of excess water Vapour permeable - suitable for inverted roofs Lightweight super structure with high drainage capacity Surrounding edge overlaps Filling without risk of shifting apart Cross and T-joints possible - minimal offcuts

Perforated gravel retainer L-section as border of a green roof. Fixed to the roof membrane. For roof pitches of up to 5°.

Perforated Edge Trim L-section as border of a green roof. Fixed to the roof membrane. For roof pitches of up to 5°.

Optigrun Lawn Substrate R is used preferably for lawn areas and intensive multi-layered green roofs with a roof pitch of 0 - 20°.

Optigrun Drainage and Storage Board FKD 25 for use on extensive green roofs with single- or multi-layer construction and under path surfaces (can be walked on).On flat roofs up to 5 % roof pitch In a triple-layer structure with filter fleece FIL 105 and extensive multi-layer substrate E Under thin-layer pedestrian pathways in gravel beds without bedding material The large naps can face either downwards or upwards Suitable for non-pitched roofs Suitable for use on inverted roofs With water reservoir

Railing system secured by superimposed load for installation on private or public flat roofs with a pitch of up to 3°. System with a patented adjustable foot that permits exact 3D positioning of the posts when applied to roofs with varying pitches.

L-section for separation of gravel and substrate. Simple installation due to click-connection system. Installed on protection membrane, drainage elements or filter fleeces; connectable to water conduit systems. For roof pitches of up to 5°.

Perforated Edge Trim L-section as border of a green roof. Fixed to the roof membrane via aluminium connection elements. For roof pitches of up to 5°.

The drainage gutters are suitable for all applications in which excess water needs to be drained quickly and in a targeted manner: terraces, façades and other rising components, as well as around the eaves of pitched roofs. Gutters are particularly crucial with barrier-free designs. They are made of galvanised steel or stainless steel and are available in various lengths, heights and cross-sections.For drainage surface water from pavements, e.g. in inspection chambers above drainage outlets For draining driving rain on façades Fixed height or height-adjustable Available with many different covers Various accessories such as branch lines and end caps

Optigrun Intensive Substrate Urban Soil is used as a vegetation substrate for intensive multi-layered green roofs. Specifically designed for growing vegetables and berry bushes on garden roofs with 0 - 5° roof pitch.

Infiltration trough made of recycled PP intended for surface drainage in combination with a Flow Control System; high water retention potential, used for extensive green roofs with 0° roof pitch.

Portal frame buildings are low-rise steel structures consisting of rafters and columns which are connected to moment-resisting connections for super strength. As a result, they are constructed bay by bay which make them very fast to erect on site. Portal frame steel constructions are therefore typically seen in warehouses, barns and other places where large, open spaces are required at low cost and a pitched roof is acceptable. Our modern steelwork fabrication shops have computer-aided design and detailing (CAD), which is linked directly to factory floor computer numerically controlled (CNC) machinery, creating a genuine seamless CAD/CAM environment. The accuracy of the computer-generated details being transmitted directly to the CNC machinery increases the quality standards of the production. Novelty Steel has adapted EN 1090-2 standards into its manufacturing processes supervised by experienced quality management team.

Optigrun Triangle Maxi Inspection Chamber TMK suitable for negative pressure drainage. Combinable with Triangle and TSK water discharge systems. Drainage capacity for 2 % roof pitch and profiles connected to all four sides: 24 l/s. Extendable in 50 and 100 mm increments.

Extra lightweight, pressure-resistant drainage material under intensive green roofs with or without water accumulation, for 0° - 5° roof pitch. Particularly suitable for terrain modelling with very high layer structure heights and severely restricted load reserves for the ceiling construction.

Extra lightweight, pressure-resistant drainage material under intensive green roofs with or without water accumulation, for 0° - 5° roof pitch. Particularly suitable for terrain modelling with very high layer structure heights and severely restricted load reserves for the ceiling construction.

Infiltration trough made of recycled PP intended for surface drainage in combination with a Flow Control System; high water retention potential, used for intensive green roofs with 0° roof pitch and varying layer heights.Base plate with load-distributing structure For temporary and/or permanent storage of rainwater with regulated water discharge through a Flow Control System High compressive strength With freely flowable structure for quick distribution of rainwater within the retention room Suitable for inverted roofs (when used on inverted insulation, no permanent water storage is possible

Optigrun Drainage and Storage Board FKD 60BO under intensive roof greening in multi-layer construction and temporarily drivable gravel lawn without gravel base layer filled with Drainage Material Perl 8/16Under intensive roof greening in multi-layer construction filled with Drainage Material Perl 8/16 Under temporarily drivable gravel lawn without gravel base layer filled with Drainage Material Perl 8/16 Unfilled installation under intensive roof greening is possible with a substrate height of up to 400 mm in combination with Optigrün Filter Fleece FIL 300 (it is not possible for vehicles of any kind to drive over the unfilled Optigrün Drainage and Storage Board FKD 60BO) Suitable for non-pitch roofs Rapid draining of excess water Vapour permeable - suitable for inverted roofs Lightweight super structure with high drainage capacity Surrounding edge overlaps Filling without risk of shifting apart Cross and T-joints possible - minimal offcuts

Arslan Metal offers Sheet Lead for many applications that include Radiation Shielding - laboratories, hospitals, dental offices and veterinary clinics, Construction – flat and pitched roofing, mosques roofing, clading, flashing and waterproofing, gutters, parapets, Corrosion Protection - acid Storage and handling - autoclaves movable lead screens sound barriers and sound proofing, tank lining vibration absorbers and all lead detail work. They are produced that Lead fluid is casting to the moulds and follows to the rolling machines,to be lead sheets.

Arslan Metal offers Sheet Lead for many applications that include Radiation Shielding - laboratories, hospitals, dental offices and veterinary clinics, Construction – flat and pitched roofing, mosques roofing, clading, flashing and waterproofing, gutters, parapets, Corrosion Protection - acid Storage and handling - autoclaves movable lead screens sound barriers and sound proofing, tank lining vibration absorbers and all lead detail work. They are produced that Lead fluid is casting to the moulds and follows to the rolling machines,to be lead sheets.