Pitched roof - Import export

Optigrun Drainage Board FKD 58SD is used for pitched roofs with a pitch in between 15° and 35°. Made from expanded polystyrene.

Optigrun Anti-Slip System T for green roofs with roof pitches ranging from 15 to 45°; load distribution against the eaves.

Optigrun Anti-Slip System for green roofs with roof pitches of up to 45°; with thrust thresholds and stainless steel cables.

Optigrun Anti-Slip System N is used on roofs with 15 - 45° roof pitch, if needed in combination with Optigrün Fastening Profile.

Optigrun Pitched Roof Board FKD 58SD is used for pitched roofs with a pitch in between 15° and 35°. Made from expanded polystyrene. With precisely fitting Z-fold on top and bottom edge and lateral indentations for safe shear stress transfer in direction of the water flow; no possibility of substrate reaching the protective layer thanks to tight fit of horizontal and lateral edges. The integrated chambers provide excellent anti-slippage for the substrate, high water storage capacity and an integrated water distribution system. Lay out according to manufacturer informations with max. 80 mm overfill (incl. vegetation mat).

Optigrun rot-proof Vegetation Mats are used for extensive pitched roofs or wind up-lift protection.

Optigrun Seed Mix EKR/EGR for the nature roof system structue (also pitched roof). Must be used in conjunction with sedum shoot seeding (then 50 g/m²). EKR herb version: approx. 30 herb species EGR grass version: approx. 9 grass species For extensive green roofs (also pitched roof)

Optigrun Extensive Multi Layer Substrate E-heavy is used as a vegetation substrate for extensive green roofs with a multi-layered build-up, for pitched roofs with roof pitch > 5° and for roofs with high load capacity/reserve; suitable for a broad plant species diversity.

The rail connector is supplied in a set with the associated screws and is part of the K2 SingleRail system for pitched roofs. The connecting element connects two rails and is made of aluminium.

Optigrun Structured Storage Fleece SSV 800 is used as a protection fleece for pitched roofs with a combined functionality of water storage and drainage.

The mounting rail for the K2 SingleRail system is suitable for pitched roofs, such as tiled roofs. It is made of aluminum and is 3.30 meters long. It can be used variably and is suitable for many areas of application.

This flat rate for the proven Alumero substructure for pitched roofs allows you to calculate your offers quickly and easily. Please note that the individual static calculation must be made by us at the latest when you place your order.

This flat rate for the proven Alumero substructure for pitched roofs allows you to calculate your offers quickly and easily. Please note that the individual static calculation must be made by us at the latest when you place your order

The middle clamp 2.1 Click is a practical and simple component for the Alumero pitched roof system. It is suitable for module frames with a height of 30 – 45 mm. After clicking into the profile rail, the clamp sits securely and can be easily pushed to the side for installation. The clamp is delivered completely pre-assembled.

The middle clamp 2.1 Click is a practical and simple component for the Alumero pitched roof system. It is suitable for module frames with a height of 30 – 45 mm. After clicking into the profile rail, the clamp sits securely and can be easily pushed to the side for installation. The clamp is delivered completely pre-assembled.

This flat rate for the proven substructure from K2 Systems for pitched roofs allows you to calculate your offers quickly and easily. Please note that the individual static calculation must be made by us at the latest when you place your order. You can use this statics report ideally for system documentation.

The middle clamp 2.1 Click is a practical and simple component for the Alumero pitched roof system. It is suitable for module frames with a height of 30 – 45 mm. After clicking into the profile rail, the clamp sits securely and can be easily pushed to the side for installation. The clamp is delivered completely pre-assembled.

Optigrun Protection and Drainage Board FKD 60BU under public roofs with and without roof pitch, filled with Drainage Material Perl 8/16 or chippings 2/5Under public roofs with and without roof pitch, filled with Drainage Material Perl 8/16 or chippings 2/5 Suitable for non-pitch roofs Rapid draining of excess water Vapour permeable - suitable for inverted roofs Lightweight super structure with high drainage capacity Surrounding edge overlaps Filling without risk of shifting apart Cross and T-joints possible - minimal offcuts

Optigrun Drainage and Storage Board FKD 25 for use on extensive green roofs with single- or multi-layer construction and under path surfaces (can be walked on).On flat roofs up to 5 % roof pitch In a triple-layer structure with filter fleece FIL 105 and extensive multi-layer substrate E Under thin-layer pedestrian pathways in gravel beds without bedding material The large naps can face either downwards or upwards Suitable for non-pitched roofs Suitable for use on inverted roofs With water reservoir

Perforated gravel retainer L-section as border of a green roof. Fixed to the roof membrane. For roof pitches of up to 5°.

Perforated Edge Trim L-section as border of a green roof. Fixed to the roof membrane. For roof pitches of up to 5°.

Optigrun Lawn Substrate R is used preferably for lawn areas and intensive multi-layered green roofs with a roof pitch of 0 - 20°.

Railing system secured by superimposed load for installation on private or public flat roofs with a pitch of up to 3°. System with a patented adjustable foot that permits exact 3D positioning of the posts when applied to roofs with varying pitches.

L-section for separation of gravel and substrate. Simple installation due to click-connection system. Installed on protection membrane, drainage elements or filter fleeces; connectable to water conduit systems. For roof pitches of up to 5°.

L-section for separation of gravel and substrate. Simple installation due to click-connection system. Installed on protection membrane, drainage elements or filter fleeces; connectable to water conduit systems. For roof pitches of up to 5°.

Perforated Edge Trim L-section as border of a green roof. Fixed to the roof membrane via aluminium connection elements. For roof pitches of up to 5°.

Optigrun Intensive Substrate Urban Soil is used as a vegetation substrate for intensive multi-layered green roofs. Specifically designed for growing vegetables and berry bushes on garden roofs with 0 - 5° roof pitch.

The drainage gutters are suitable for all applications in which excess water needs to be drained quickly and in a targeted manner: terraces, façades and other rising components, as well as around the eaves of pitched roofs. Gutters are particularly crucial with barrier-free designs. They are made of galvanised steel or stainless steel and are available in various lengths, heights and cross-sections.For drainage surface water from pavements, e.g. in inspection chambers above drainage outlets For draining driving rain on façades Fixed height or height-adjustable Available with many different covers Various accessories such as branch lines and end caps

Extra lightweight, pressure-resistant drainage material under intensive green roofs with or without water accumulation, for 0° - 5° roof pitch. Particularly suitable for terrain modelling with very high layer structure heights and severely restricted load reserves for the ceiling construction.