Results for
BAUER GMBH
Germany
-perforated sieve, perforation Ø 3 mm, separation 6 mm -1“ drain-cock for drainage of liquids -ideally situated loading centre of gravity -can be emptied at any height by cable from the driver‘s seat -body wall with reinforced edging -sturdy frame with fork sleeves -can be secured to prevent slipping and unintentional emptying -welding, oil- and watertight -with castors and handle Accessory -galvanized lid, can be opened from both sides
Request for a quoteBAUER GMBH
Germany
can be stacked (3 units) Type BBG -sturdy steel construction made of smooth -steel sheeting Type BBK -sturdy construction made of smooth steel sheeting -with hinged inclined wall for easy loading p.e. with wheelbarrow -reinforced strutting on the rear side of the front flap -secure on both sides to close the front flap Type BBP -sturdy construction made of distortion-proof steel sheeting Accessories -cones for emptying via tilting traverse type BBT galvanized lid, lockable
Request for a quoteBAUER GMBH
Germany
-The stacking tipper made of distortion proof steel sheeting for heavy duty use -can be stacked when full (3 units) -is emptied by cable operated from the driver‘s seat using the traverse -spray painted or hot-dip galvanized -Volume (approx.) in m³: 0,3 / 0,55 / 0,7 / 0,9 / 1,5 / 2,0 -Load capacity in kg: 500 - 2000 Accessories -2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake -construction height 220 mm (stacking NOT possible) -galvanized 2-part lid, can be opened from one side (stacking NOT possible)
Request for a quoteBAUER GMBH
Germany
-sturdy steel sheeting construction with reinforced edging -frame made of steel tubing -welding, oil- and watertight -spring safety fastening -2 wheels + 1 swivel castor (as of volume 600 litres upwards + 2 swivel castors) made of solid rubber Ø 250 x 60 mm, one swivel castor with brake -handle Types available: -without fork sleeves (type KW) -with fork sleeves can be secured to prevent slipping and unintentional emptying -Spray painted or hot-dip galvanized -Volume (approx.) in l: 250 / 400 / 600 / 1000 -Load capacity in kg: 300 kg Accessory -galvanized lid, can be opened from both sides
Request for a quoteBAUER GMBH
Germany
-ideally situated loading centre of gravity -can be emptied at any height by cable operated from the driver‘s seat -body wall with reinforced edging -sturdy frame with fork sleeves -can be secured to prevent slipping and unintentional emptying -wheels can be fitted later (up to BK 110) -spray painted our hot-dip galvanized -Volume (approx.) in m³: 0,3 / 0,5 / 0,6 / 0,7 / 0,8 / 0,9 / 1,0 / 1,1 / 1,2 / 1,3 / 1,4 / 1,5 / 1,6 / 1,7 / 1,8 /1,9 /2,0 -Load capacity in kg: 750 - 2000 Accessories: -2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel with brake ,construction height 220 mm -galvanized lid, can be opened from both sides
Request for a quoteBAUER GMBH
Germany
-sturdy steel construction with smooth interior walls -trap door operated by cable from the driver’s seat -rubber cushioning to lessen the impact when the trap door is opened -trap door closes automatically when the container is set down on the ground -can be secured to prevent slipping and unintentional trap door operation -suitable for forklift truck and crane -100 mm ground leeway, suitable for pallet truck -with 4 crane eyes Ø 40 mm -can be stacked (3 units) -spray painted or hot-dip galvanized -Volume (approx.) in m³: 0,5 / 0,75 / 1,0 / 1,5 / 2,0 -Load capacity in kg: 1000 -2000 kg Accessories -2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake - construction height 220 mm -galvanized lid, can be opened from both sides -trap door with galvanized guiding plates
Request for a quoteBAUER GMBH
Germany
-an ideal dumping angle -can be emptied at any height by cable operated from the driver’s seat -body wall with reinforced edging -sturdy frame with fork sleeves -can be secured to prevent slipping and unintentional emptying -wheels can be fitted later -spray painted or hot-dip galvanized -Volume (approx.) in m³: 0,3 / 0,5 / 0,75 / 1,0 / 1,5 / 2,0 -Load capacity in kg: 750 - 1500 Accessories -2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake, construction height 220 mm -galvanized lid, can be opened from both sides
Request for a quoteBAUER GMBH
Germany
-sturdy steel construction -ideally situated loading centre of gravity -can be emptied at any height by cable -operated from the driver‘s seat -body wall with reinforced edging -sturdy frame with fork sleeves -can be secured to prevent slipping and unintentional emptying -wheels can be fitted later -Surface spray painted or hot-dip galvanized -Volume (approx. in m³): 0,15 / 0,30 / 0,60 / 0,90 / 1,20 / 1,70 / 2,10 -Load capacity: 750 - 1500 kg Accessories: -2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake construction height 220 mm -galvanized lid, can be opened from both sides -welding, oil- and watertight -trailer coupling and towing bar
Request for a quoteBAUER GMBH
Germany
-perforated intermediate floor 100 mm above the floor, perforation Ø 3 mm, separation 6 mm -1” drain-cock for drainage of liquids -can be emptied at any height by cable operated from the driver’s seat -body wall with reinforced edging -sturdy frame with fork sleeves -can be secured to prevent slipping and unintentional emptying -welding, oil- and watertight -spray painted or hot-dip galvanized -Volume (approx.) in m³: 0,3 / 0,5 / 0,75 / 1,0 / 1,5 -Load capacity in kg: 750 - 1500
Request for a quoteBAUER GMBH
Germany
-sturdy steel construction with reinforced edging -material strength: body wall 5 mm and fork sleeves 6 mm especially for heavy materials -through fork sleeves, closed construction make the unit very sturdy -ideally situated loading centre of gravity -rolling mechanism emptying: 1 automatic release function activated when the release foot is set down on the Container rim or 2 manual release by pulling on the cable provided -Finish: spray paintet or hot-dip galvanized -Volume (approx: in m³): 0,3 / 0,6 / 0,9/ 1,2 / 1,7 / 2,1 -Load capacity: 4000 kg Accessories -2 swivel + 2 fixed polyamide castors, one swivel castor with brake – remember the load capacity
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Lubrication of all kind of high stressed sliding areas, especially at low sliding speeds or oscillating movements, e.g. at threads, joints and bayonet nut connectors made of steel or non ferrous metals Assembling paste with corrosion protection for screws, bolts, spikes, bushings, flanges, spindles and fittings in the whole food stuff industry Separation of high temperature stressed screw joints, even after a long operation time Advantages and benefits Adheres good on metal surfaces, has a good water resistance and corrosion protection Good water resistance Prevents from tribo-corrosion Contains no metal pigments and is free of sulphurous materials Neutral to alloyed steels Formulation according to the FDA guideline 21CFR 178.3570 Registered by the NSF H1 MOSH/MOAH-free For optimal adhesion clean thread and sliding areas from dirt and other lubricants, first mechanically (e.g. with wire brush) and then with OKS 2610/OKS 2611 Universal Cleaner. Apply paste evenly in a sufficient amount
Request for a quoteFRIEDR. FREEK GMBH
Germany
We offer an extensive range of drum and barrel heaters and container heaters: Heating jackets, silicone drum heaters, base drum heaters and insulating but unheated drum jackets and lids for heating and insulating plastic and metal drums respectively containers. According to the destined application we use polyester, silicone, teflon and glass fibre for our drum heaters and container heaters. Some of the materials are coated and multi-layered resp. combined. Our drum heaters can be used individually and in combination and can be ordered and delivered online (shop.freek.de) for all standard drum sizes (25 / 50 / 105 / 200 litres). Of course, we also manufacture our heating jackets, heating sleeves, base heaters and insulating bonnets individually to fit your container and your special application. HC - Heating cabinets If you heat several drums or containers together or need a container heater for the ATEX area, the heating cabinets from our partner Amarc are the right choice.
Request for a quoteVISCOTEC PUMPEN- U. DOSIERTECHNIK GMBH
Germany
▪ Automated emptying system for containers up to approx. 30 liters ▪ Volumetric conveying progressive cavity pump based on the endless piston principle ▪ Pulsation-free and precise emptying and material supply to 1C and 2C dispensing systems ▪ In redundant dosing systems applicable ▪ For medium to high viscosity materials ▪ For structure sensitive, filled, abrasive materials ▪ Application for cylindrical or slightly conical metal and plastic containers ▪ Housing for machine safety and protection against dirt contamination ▪ Automatic retraction and venting the container as well as detection of media surface ▪ 4“-Touch panel with function keys for comfortable setting and parametrization of the system ▪ Externally controllable via Profinet interface ▪ Continuous determination of the position of the follower plate and level monitoring ▪ Adjustable pressure reduction for longer pauses
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Highly adhesive lubrication of moving parts, e.g. valve spindles, piston rods, wire cables, drag cables, drive and conveyor chains, hinges and guides, at highly corrosive conditions in food processing technology Temporary corrosion protection of ferrous and non-ferrous metals, in particular in highly corrosive atmospheres, such as industrial atmospheres, outdoor weathering under roofs of semi-finished products and finished products Shipping protection of packed and unpacked machines and machine parts, apparatuses and equipment goods under extreme climatic conditions Advantages and benefits Highly adhesive oil with very good creep and lubrication properties Optimal corrosion protection through high effectiveness of the corrosion protection additive After the solvent has dried, forms a transparent, highly adhesive oil film Contains non-ferrous metal deactivator NSF H1-registered Also available as spray version OKS 3601
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Highly adhesive lubrication of moving parts, e.g. valve spindles, piston rods, wire cables, drag cables, drive and conveyor chains, hinges and guides, at highly corrosive conditions in food processing technology Temporary corrosion protection of ferrous and non-ferrous metals, in particular in highly corrosive atmospheres, such as industrial atmospheres, outdoor weathering under roofs of semi-finished products and finished products Shipping protection of packed and unpacked machines and machine parts, apparatuses and equipment goods under extreme climatic conditions Advantages and benefits Highly adhesive oil with very good creep and lubrication properties Optimal corrosion protection through high effectiveness of the corrosion protection additive After the solvent has dried, forms a transparent, highly adhesive oil film Contains non-ferrous metal deactivator NSF H1-registered
Request for a quoteSPANSET SECUTEX GMBH
Germany
Plastic for welding … Welding is often the simplest and best way of fastening. The range of different perforated plates offers a wide range of applications. Size and quantity of the welding joints depend on the substructure and must be defined on site. Please note that the perforated metal sheet can under no circumstances take over any static functions. The secutex buffer pad is simply disconnected by grinding away the welding spots. These are the advantages Simply weld onto the item to be welded No need for repeatable holes in the workpiece No holes in the secutex impact protection material Applications On all metal surfaces On thin metal walls Everywhere where screwing is not possible or screw holes are unwanted Examples Collecting basins Ramp protection metal boxes Container Forklift Gripper Girder protection Pallet truck 1. Perforated metal sheet, overhang at the side This version is suitable for welding onto flat surfaces and extrawide profiles of construction steel.
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
For highest contact pressure and high circumferential speed, e.g. for rotary kilns, ball mills, rotary barrel mixers, ball mills, rope winches or friction presses also for guiding elements, slide bars, heavy transport chains and closed wire ropes Lubrication of rotating assemblies of convertors, cranes, crushers and dredges with spray or central lubricating systems Lubrication of heavily loaded gear couplings Advantages and benefits Most suitable for reliable supply of open gears, even at high circumferential speed Very efficient through EP additives in association with a specific combination of solid lubricants and adhesive additives Reliable protection of tooth flanks, even at high temperatures and with extended relubrication time Good pressure resistance of the lubricating film, excellent wear protection The film is not embrittling and aging. Without bitumen, solvent, does not contain heavy metals
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
DURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Document sleeve with a magnetic strip on the back for use on metal surfaces. • Document sleeve in A6 landscape format with two magnetic strips on the back • Perfect for use on metallic surfaces, such as warehouse shelves, racking and metal containers • Coloured rear foil and transparent front foil made of heavy-duty polypropylene • Suitable for scanners and indelible • Inserts can be exchanged quickly • Internal dimensions: A6 landscape / 148 x 105 mm (W x H) • Suitable printable insert labels: Article number 485102
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Document sleeve with a magnetic strip on the back for use on metal surfaces. • Document sleeve in A5 landscape format with two magnetic strips on the back • Perfect for use on metallic surfaces, such as warehouse shelves, racking and metal containers • Coloured rear foil and transparent front foil made of heavy-duty polypropylene • Suitable for scanners and indelible • Inserts can be exchanged quickly • Internal dimensions: A5 landscape / 210 x 148 mm (W x H) • Suitable printable insert labels: Article number 485502
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Document pocket with a magnetic strip on the back. Ideal for labelling warehouse shelves, retail shelves, etc. • Document pocket with two magnetic strips on the back • Perfect for use on metallic surfaces, such as warehouse shelves, racking and metal containers • Coloured rear foil and transparent front foil made of heavy-duty polypropylene • Suitable for scanners and indelible • Inserts can be exchanged quickly • Internal dimensions: 100 x 38 mm (W x H) • Suitable printable insert labels: Article number 102202
Request for a quoteB+B AUTOMATIONS- UND STEUERUNGSTECHNIK GMBH
Germany
The systems of the VEE model series are ideally suited for labelling medium-sized containers such as buckets, paint cans and canisters in all industries such as food, chemicals, paints and varnishes - regardless of whether these are oval, round or rectangular plastic or metal containers. Depending on the customer's requirements, the products can be aligned before the labelling process, and any plastic or metal handles can be brought into the position required for labelling. Optionally, the labelling system can be expanded to include additional labelling stations for applying a lid label, if required.
Request for a quoteBALLERSTAEDT & CO. OHG
Germany
An alternative to conductive heat sealing is contact induction sealing, which is particularly suitable for sealing demanding container materials such as e.g. glass, metal or ceramic. An electromagnetic field is built up by a generator via an induction coil that is housed in the sealing head. The molecules of the aluminum foil are set in rotating vibrations, creating heat that is used for the sealing process. Our sealing machines PolySeal Vario PN and PolySeal Vario Twin as well as all fully automatic sealing systems can be equipped with induction technology.
Request for a quoteMICRO-HYBRID ELECTRONIC GMBH
Germany
The cost-efficient infrared emitter JSIR340-4 is optimized for NDIR gas analysis and other infrared measurement applications such as DIR spectroscopy, ATR spectroscopy or PAS spectroscopy. The membrane of the cmOS based IR emitter reaches membrane temperatures of up to 800 °C. It provides long-term stable radiation output for industrial applications for control and monitoring of process gases, associated gases at ambient temperatures between -20 and 85 °C. The packaging version in the standard TO housing with cap is suitable for measuring distances up to 2 cm. The MEMS chip used in our IR emitters consists of a multilayer hot plate diaphragm containing a high temperature stable metal C-MOSI layer. The emitter chip has an active area of 2.2 x 2.2 mm2 and is based on a silicon substrate with a back-etched membrane. All thin film processes are performed using standard MEMS processes and cmOS compatible materials. The active C-MOSI resistive layer is protected against aging & environment.
Request for a quoteMICRO-HYBRID ELECTRONIC GMBH
Germany
Cost efficient infrared emitter for NDIR gas analysis and other infrared measurement applications. With only 250 mW required input power, the emitter is also suitable for mobile - and handheld devices. The membrane of this cmOS based ire source achieves membrane temperatures up to 800 °C with long term stable radiation power and short time constant. For high volume applications such as building air conditioning, automation and others, the JSIR 340 is suitable due to its excellent price/performance ratio. The packaging with reflector is good for measurement distances from 2 cm. The MEMS emitter chip consists of a multilayer hotplate membrane containing a high temperature stable metal C-MOSI layer. The emitter chip is based on a silicon substrate with a back-etched membrane. All thin film processes are performed with standard MEMS processes and cmOS compatible materials. The active C-MOSI resistor layer is protected against aging and environment.
Request for a quoteDSMART GMBH
Germany
All our slide tin container can be customized with your artwork and idea shapes. Normal shapes are: Oval, Rectangular, Round, Square, Octagonal, Heart and so on. Artwork Format: AI, PDF, EPS, CDR, PSD Printing: Offset printing(CMYK or PMS) Glossy or matt finish outside Natural tin silver or gold varnish inside Metallic effect available Accessories options: Sponge/foam/EVA insert Transparent PET bed/cardboard bed/paper band Velvet trays, locks, handles Decoration options: 3D embossing Spot glossy/matt finish Crackle varnish, pearl varnish Leather effect PVC&PET clear window Material: First grade tinplate, 0.21/0.23/0.25/0.28mm thickness for your choice Usage: for gifts, food, candy, confections, tea, cigarette, tobacco , candle, Christmas, cosmetic etc. Certification: FDA, EN71, SGS
Request for a quoteENHA GMBH
Germany
Manufactured from a robust polycarbonate frame, FRESNA™ safety glasses do not contain any metal parts and so help protect eyes from electric arcs that may form while working on electrical equipment or heavy machinery. The slimline temple design boosts comfort when worn with ear defenders.
Request for a quoteENHA GMBH
Germany
Manufactured from a robust polycarbonate frame, FRESNA™ safety glasses do not contain any metal parts and so help protect eyes from electric arcs that may form while working on electrical equipment or heavy machinery. The slimline temple design boosts comfort when worn with ear defenders.
Request for a quoteENHA GMBH
Germany
Manufactured from a robust polycarbonate frame, FRESNA™ safety glasses do not contain any metal parts and so help protect eyes from electric arcs that may form while working on electrical equipment or heavy machinery. The slimline temple design boosts comfort when worn with ear defenders.
Request for a quoteResults for
Containers- metal - Import exportNumber of results
34 ProductsCountries
Company type
Category