Results for
IGUS® GMBH
Germany
Aside from the tried-and-tested uses of the E6, the new generation offers additional advantages which significantly simplify operation. In addition, design changes have improved accessibility to the interior, reduced weight and made assembly easier. - Option without camber (NC) simply by turning the inner link - Extremely quiet due to the small pitch and "brake" in the stop-dog system - (E61.29.070.055.0 at 1m/s = 32dB(A) according to igus internal test 4479) - Extremly low vibration - Low-abrasion connector system (no bolts and holes necessary) - Virtually no polygon effect, thereby "smooth rolling" operation - Smooth interior design for a long lifetime for cables and hoses - E61.29 series: cross bars on both sides can be snapped open and removed along the inner and outer radii - Weight savings approx. 30% compared to the E6 system - Cost-effective
Request for a quoteHYDROFLEX GROUP GMBH
Germany
The PurMop® EC40 single-use mop comprises a cleaning layer made from a robust polyester knit with special structure. This enables a good pick-up ability for regular contamination as well as an even fluid distribution with disinfectants on all types of cleanroom floors. Available in non-sterile (EC40) and sterile (EC40-S) version.
Request for a quoteIAI INDUSTRIEROBOTER GMBH
Germany
Increasing Trend: Production in the Cleanroom IAI actuators in cleanroom design are frequently used in the electronics and semiconductor industry, photovoltaic production and medical technology. Due to constantly growing requirements and new legal regulations, they are also increasingly used in other production areas where dust or dirt particles are to be avoided. Stainless steel dust protection band All IAI cleanroom products are classified in ISO cleanroom classes for the maximum permissible particle concentration per m³ of air. With a stainless steel dust protection band, the actuators are sealed and ISO cleanroom compliance is achieved by drawing the air inside the enclosure. Furthermore, the sealed construction also allows the unit to be used, for example, in vertical and horizontal directions (in lateral position), i.e. in the mounting forms that were previously only possible to a limited extent.
Request for a quotePEKU FOLIEN GMBH
Germany
Cleanroom bags and films - low-particle cleanroom bags and cleanroom films for research, pharmaceuticals, medicals Highest quality standards according to DIN EN ISO 14644, ISO 7, ISO 5 are fulfilled.
Request for a quoteHYDROFLEX GROUP GMBH
Germany
The innovative PurWipe® N2 cleanroom nonwoven wipe consists of a polyester-polyamide-microfiber material. The ultrafine microfibers ensure good fluid absorbency as well as a high cleaning ability and optimal removal of tiny particles on all types of surfaces. Thanks to its superior tear resistance and fully synthetic material, the N2 wipe is ideally suited for a broad range of applications. Recommended for effective cleaning and disinfection on various surfaces in cleanrooms. Available in non-sterile, sterile and other sizes.
Request for a quoteHYDROFLEX GROUP GMBH
Germany
2.0 ERGO 230 is a compact, touchless cleanroom cleaning trolley of the second generation with plastic buckets. The special design allows the discarding of used mops at the back and therefore ensures a higher safety against cross-contamination. The unique ERGO mop wetting unit guarantees reproducible, disinfectant-saving liquid dosing in just one step and can be adapted to different fluid requirements thanks to various mop plates. The new mop discarding mechanism ensures a touchless and safe discarding of used mops. The standard PurMop® accessories include a mop handle holder on the side and a rear waste bag holder for PurMop® waste bags. 2.0 ERGO 230 has two additional plastic buckets, which can be used to store cleaning utensils.
Request for a quoteHYDROFLEX GROUP GMBH
Germany
2.0 ERGO-S 230 is a compact, touchless cleanroom cleaning trolley of the second generation made of stainless steel. The special design allows the discarding of used mops on the back and therefore ensures a higher safety against cross-contamination. The unique ERGO mop wetting unit guarantees reproducible, disinfectant-saving liquid dosing in just one step and can be adapted to different fluid requirements thanks to various mop plates. The new mop discarding mechanism ensures a touchless and safe discarding of used mops. The standard PurMop® accessories include a mop handle holder on the side and a rear waste bag holder for PurMop® waste bags. 2.0 ERGO-S 230 has two additional stainless steel buckets, which can be used to store cleaning utensils.
Request for a quoteHYDROFLEX GROUP GMBH
Germany
The PurMop® EFB40 single-use mop with its innovative cleaning pile was developed for highest performance in cleanroom cleaning. The special polyester scrub stripes loosen even tough residues and contaminants during wiping which are then safely picked up by the microfiber stripes. Available in non-sterile (EFB40) and sterile (EFB40-S) version.
Request for a quoteIGUS® GMBH
Germany
The T3 system combines smooth operation, low noise, simple assembly, and economy. The side bands, which snap together, replace a conventional pin and bore connection and prevent relative movements between the joints giving extremely low wear. This means virtually no wear or abrasion (cleanroom). The t-band's geometry means that hardly any polygon effect is generated when the energy chain is placed. The t-band therefore rolls in a very smooth arc, giving extremely low vibration and noise. In order to reduce the manufacturing and installation costs, the t-band is not mounted individually, but – much like the E3 system – in an eight-link length. Due to its low mass, the t-band is suitable for applications with low fill weights and short strokes combined with high speeds and accelerations.
Request for a quoteHYDROFLEX GROUP GMBH
Germany
PurMop® EF40 single-use mop comprises a specially developed microfiber looped cleaning pile made from 80 % polyester-microfiber and 20 % polyester . This innovative disposable mop stands out through its superior cleaning ability and a good price-performance ratio. It offers an effective and safe alternative to reusable mops, without the need of decontamination after use. Available in non-sterile (EF40) and sterile (EF40-S) version.
Request for a quoteBÜRKLE GMBH
Germany
The sampling bag SteriBag Cleanroom with double packaging can be placed directly in the clean room. 25 sample bags are placed in double secondary packaging. They can be removed one after the other and are therefore ideally suited for introducing into the clean room. Then the sterile bags can be used directly in the clean room. SteriBag Cleanroom is sterile inside and outside. This guarantees contamination-free storage and transport of solid, semi-solid and liquid media. The sample bag is perfect for use in chemical and pharmaceutical applications. The disposable sample bag has a labelling field, saves space and is also easy to transport. The large bag opening makes it easy to pour in the sample.
Request for a quotePRESSTECK S.P.A.
Germany
Thermostatic valves - i.e. the temperature controls on the heating system - are found in just about every home. In the head of a thermostatic valve there is a metal bellows, a corrugated tube that expands according to the room air temperature. For these metal bellows, the manufacturer needed deep-drawn, very long and thin-walled sleeves. The challenge: the sleeves must be matched to the customer's downstream process under very tight tolerance specifications. Why? Because the sleeves cannot be further processed if the geometries vary. Absolute precision is therefore required. We can offer absolute precision. The customer commissioned us with the production of the sleeves. On the one hand, because we fulfil the special deep-drawing requirements. On the other hand, because we can offer an associated, targeted heat treatment for material stress relief in-house.
Request for a quotePEKU FOLIEN GMBH
Germany
PEKUWhite - Our low-particle cleanroom films and cleanroom bags, tuned to your needs in the pharmaceutical, medicals, laboratory sector. The cleanroom packaging fulfils the highest quality standards.
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
RK Rose+Krieger has optimised its RK Duoline profile linear unit for use in cleanrooms and now offers spindle and belt-driven RK Duoline Clean linear units, with or without vacuum suction, in the popular sizes 60 and 80. A total of eight different versions passed EN ISO 14644-1 testing to be awarded cleanroom certification in the global classifications 1 (RK Duoline Clean 60 SU with 0.5 m/s vacuum suction) to 5 (RK Duoline Clean 80 Z without 0.5 m/s vacuum suction). All the requisite cleanroom suitability tests were conducted at the Fraunhofer Institute for Manufacturing Engineering and Automation (IPA) in Stuttgart. Key features RK DuoLine Clean All external steel parts nickel-plated or made of stainless steel Suitability according to EN ISO 14644 -1 for clean rooms Optionally with or without vacuum suction High efficiency Low no-load torque Central lubricating Access
Request for a quoteHYDROFLEX GROUP GMBH
Germany
The PurWipe® V3 is a newly developed presaturated microfiber nonwoven wipe, which consists purely of synthetic fibers and boasts a high absorbency combined with reduced particle emission. This wipe‘s microfibers ensure an effective cleaning performance on all types of surfaces. This in combination with the high tear and abrasion resistance make this wipe an innovative and safe solution for cleaning and disinfection in cleanrooms. Application / Usage: Recommended for effective cleaning and disinfection on various surfaces in cleanrooms. Use biocidal products safely. Always read the label and product information before use!
Request for a quoteHYDROFLEX GROUP GMBH
Germany
The PurWipe® N2 is a microfiber nonwoven wipe which consists purely of synthetic fibers and boasts a high fluid absorption combined with reduced particle emission. The pouch can be filled with your fluid of choice. The wipes are individually z-folded in a chemical resistant pouch with lid. A wide range of cleaning and disinfectant agents can be added for which today there is no presaturated wipe available. The pouch is resistant to common cleanroom bactericides, sporicides and detergents.
Request for a quoteHYDROFLEX GROUP GMBH
Germany
Manufactured from 100 % recycled and GRS-certified polyester yarn, PurMop BLACK® D3-SR is the epitome of sustainability in cleanroom cleaning. The material is made of post-consumer PET-bottles, with approximately 5 bottles being used for each cleanroom mop. Thanks to the newly developed, 100 % microfiber loops with enhanced length and high-performance inserts, D3-R boasts great fluid absorption, resulting in large area capacity. This mop combines performance and eco-friendliness like no other, bringing real sustainability and ergonomics to manual cleaning. D3-SR offers all unique features of the PurMop BLACK® mop range, such as color-coding, finger loop and integrated “Wings” technology. D3-R is developed for the use with PurMop BLACK® C1 mop system.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
STRUBL GMBH & CO. KG KUNSTSTOFFVERPACKUNGEN
Germany
Technologies film-Extrusion (Mono and Coex) converting manual converting of special products packaging ("bag-in-bag") GMP Principles cleanroomproduction (ISO 14644-1, class 8 and 9) Pestcontrol / HACCP- Prinziples Traceability / Validation EU-Pharmacopoe / FDA / EU 10/2011 Kontaminationsfreie Verpackung („Bag-in-Bag“), declartion of conformität ISO 9001:2008, EC-qualitycontrol, In-Process-controlm certificates continuous improvment / quality audits / training
Request for a quoteSTRUBL GMBH & CO. KG KUNSTSTOFFVERPACKUNGEN
Germany
Application : protection against contamination all over the cleanroom process-chain for cleanrooms ISO 8 DIN EN ISO 14644-1 features: transparent, easy sealable for packaging of small and midsized cleanroom products Specification : Material: LDPE 100 my, with additives (slip, antibloc), foodgrade EU 10/2011 features: bottom seal, cleanroom quality, transparent packaging: "bag-in-bag" (2 x PE-bags)
Request for a quoteSTRUBL GMBH & CO. KG KUNSTSTOFFVERPACKUNGEN
Germany
Application protection against contamination all over the cleanroom process-chain for cleanrooms ISO 8 DIN EN ISO 14644-1 features: transparent, easy sealable for packaging of small and midsized cleanroom products Specification Material: LDPE 100 my, with additives (slip, antibloc), foodgrade EU 10/2011 fetaures: cleanroomquality, transparent, plastic core 76 mm packaging: "bag-in-bag" (2 x PE-bags)
Request for a quoteRIPPERT ANLAGENTECHNIK GMBH & CO. KG
Germany
Painting in cleanrooms according to the DIN EN ISO 14644 standard Cleanroom technology Many processes for the application of technically functional coatings for increased resistance to scratching (hardcoat), UV stability, lotus effects, anti-fog or other thin-film applications place high demands on the implementation and function of the coating plant and its components. Thanks to a modular design, optimum plants are conceived in close cooperation with customers and users that minimise faulty coatings caused by particle inclusions and the resulting product scrap or rework expenditure. The plants are designed strictly in accordance with the DIN EN ISO 14644 the standard. In designing the filter stages we orientate ourselves to a particle size with a diameter of 0.5 µm. Built-in components such as conveying equipment, robotics, application technology etc. are adapted by careful selection of the appropriate task. A further criterion in the conception of the plants is fast and efficient cleaning and maintenance, in order to obtain long plant operation times with a constantly good yield. Traditional applications are the coating of diffusers or cover glasses for car headlights or polycarbonate glazing.
Request for a quoteIAI INDUSTRIEROBOTER GMBH
Germany
SCARA Robot in Cleanroom-compatible Design IAI offers compact and powerful SCARA robots in cleanroom-ready design according to ISO standard 14644-1:2015. They are a popular option for small robotic assembly applications. These robots generate minimal dust, making them ideal for use in a cleanroom environment. The air inside the robot can be exhausted to create a negative pressure when ISO cleanroom class 3 conditions must be met.
Request for a quoteResults for
Cleanrooms - Import exportNumber of results
23 ProductsCountries
Company type