Canned pulses - Import export

The µCAN.8.pwm-SNAP unit is equipped with 8 outputs which provide pulse width modulated signals (PWM) within the range of 0% to 100% for controlling of actuators (valves etc.)

Our Master Oscillator Power Amplifier – MOPA for short – series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power – whatever your application requires. Due to the special technical design of the laser system, it works in transversal single-mode operation with high peak-to-peak pulse power stability, medium medium power stability and short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The MOPA355-200 is a high-peak power MOPA with a peak pulse power of over 140 kW. It delivers 250 µJ single pulse energy and can operate at repetition rates up to 1 kHz. The pulse energy is adjusted via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technology.

Our Master Oscillator Power Amplifier - MOPA for short - series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power - just as your application requires. Due to the special technical design of the laser system, it works in transverse single-mode operation with high peak-to-peak pulse power stability, good average power stability and a short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The MOPA1064-2000 mW is a quasi-CW MOPA with a maximum repetition rate of 20 kHz. It delivers 140 µJ single pulse energy and an average power of up to 2 W. The pulse energy can be set via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technologies.

Our Master Oscillator Power Amplifier – MOPA for short – series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power – whatever your application requires. Due to the special technical design of the laser system, it works in transversal single-mode operation with high peak-to-peak pulse power stability, medium medium power stability and short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The MOPA1064-650 is a high-peak power MOPA with a peak pulse power of over 400 kW. It delivers 650 µJ single pulse energy and can operate at repetition rates up to 1 kHz. The pulse energy is adjusted via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technology.

Our Master Oscillator Power Amplifier - MOPA for short - series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power - just as your application requires. Due to the special technical design of the laser system, it works in transverse single-mode operation with high peak-to-peak pulse power stability, good average power stability and a short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The MOPA532-700mW is a quasi-CW MOPA with a maximum repetition rate of 20 kHz. It delivers 35 µJ single pulse energy and an average power of up to 700 mW. The pulse energy can be set via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technologies.

Our Master Oscillator Power Amplifier – MOPA for short – series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power – whatever your application requires. Due to the special technical design of the laser system, it works in transversal single-mode operation with high peak-to-peak pulse power stability, medium medium power stability and short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The MOPA532-250 is a high-peak power MOPA with a peak pulse power of over 180 kW. It delivers 250 µJ single pulse energy and can operate at repetition rates up to 1 kHz. The pulse energy is adjusted via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technology.

Our Master Oscillator Power Amplifier – MOPA for short – series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power – whatever your application requires. Due to the special technical design of the laser system, it works in transversal single-mode operation with high peak-to-peak pulse power stability, medium medium power stability and short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The DUV MOPA266-50 is a high-peak power MOPA with a peak pulse power of over 50 kW. It delivers 50 µJ single pulse energy and can operate at repetition rates up to 1 kHz. The pulse energy is adjusted via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technology.

The Dosing Mass flow Meter extends the range of Dosing Sensors with special attention to the dosage of non-conductive media and direct mass dosage. The devices are designed in a very compact way and can be connected directly to the Compact Controller. The sensor outputs are compatible to those provided by our magnetic-inductive flowmeter with Converter Card UV14. As a minimum configuration, 24 VDC supply, valve input and pulse output can be connected. The pulse factors are adapted to the magnetic-inductive flow meter, so that the devices can be interchanged easily. Advantages • compact design • direct measurement of mass • measurement of non-conductive media • very short dispensing time down to 250ms • high accuracy / repeatability • no moving parts • easy to clean compared with piston filler • product gentle filling Flexibility • DN 10, 15, 20, 25 • liquid temperature 0°C to 90 °C • different connections available such as: • Tri Clamp acc. DIN 32676 • Sanitary thread acc. DIN 11851

The new compact controller MDS-PLCconsists of a touch screen with integrated PLC. It can be operated for 4 independent dosing places/channels. It can be connected to every flow sensors, which can provide a 24 VDC pulse volume. For each dosing place/channel a correction of the overflow will be independently realized and with an adjustable maximum dosing time the valve will be closed. For each place/channel, there is a tolerance output available that reports if a dosage was performed within the prescribed limits. The dosage may be started and stopped by external inputs as well as with the touch screen. All inputs and outputs can be connected to the back side of the touch screen with screw terminals. Advantages • 4 different flow sensors are configurable • 4 counting inputs 100 kHz • 4 valve outputs 0,2A • suitable for fast dosing applications • with overflow correction and max. dosing time shutdown • Color Touch Screen Applications Filling machines with max. 4 filling places By...

The high-resolution oval wheel meter series OD is a compact dosing oval wheel meter with a direct volume output to the Compact Controller including dispensing and measuring functions. They are fitted with Tri-Clamp connections and a high-resolution Wiegand sensor for measuring Newtonian, non-abrasive liquids such as water, oil, grease, etc. Meters of the Flowal® series are based on a robust concept , have a very simple design and can be adapted to a wide field of applications. The innovative design is the result of merging long years of experience with the latest technologies. The meters in a compact design can be connected directly to the Compact Controller. In the minimum configuration 24 VDC supply, valve input and pulse output can be connected. The electrical connections is identical to the dosing mass flow meter so that devices can easily be interchanged depending on the requirements. Accurate, reliable and economical dosing and measurement with the Bopp & Reuther dosing...

This laser system is quickly set up for the welding task. The flexible laser arm can be rotated 360 ° and offers a very high or low working position. The laser head can be rotated to the left and right and the tilt-swivel lens directs the laser beam to the point desired by the operator. The robust housing has stable aluminum handles at the corners for increased impact protection of the edges. Integrated fastening options are available here for easy lashing during transport. The gas bottle can be transported during welding with a small trailer, the 5th wheel on the laser. Generous storage areas and special brackets on the machine sides ensure that tools, welding wire and whatever else is always within reach. Operation is intuitive via a touch display. Some apps help to weld surfaces, shafts and circular welds. The 450 W fiber laser can be used for pulsed welding or for welding in CW mode.