Laser - Import export

We are specialist in strain gage strain measurements on printed circuit boards and all other components. We carry out the application of strain gages and determine for you the actual stresses that occur, or the strain (also strain-rate) on a specific or several components in the manufacturing or assembly process. We perform our DMS measurements with certified measurement technology and according to the specifications of IPC/JEDEC-9704A. Expert advice from TEPROSA When measuring strain, in addition to many factors such as the appropriate measurement technology, it is also important to rperform the strain measurement correctly and to ensure that the sensors record the forces correctly. To ensure that the deformation of an object is correctly determined, it is therefore crucial to select the right strain gauges (also known as measuring strips) and to place them in the correct position on the measured object.

KIRSCH Kunststofftechnik has specialised in lasering transparent or coloured plastics like acrylic glass, up to a maximum thickness of 20 mm. The advantage when cutting is a shiny edge which does not need to be polished afterwards. We are offering a variable processing size up to 2000 x 1500 mm. Following individual arrangements we are also able to process other plastics. Our laser can be programmed using common files, making your ideas and wishes nearly limitless.

With its 3x360° laser lines, a total of 6 laser crosses are created. Due to its good visibility and high accuracy this device is a powerful tool on the construction site. By using a suitable receiver, the range can even be doubled by using a suitable receiver. The multi-line laser is compact and has rubberized edges. In addition, It can be powered in 3 ways, making it almost impossible for you to run out of power.

Do you have individual requirements for your laser processing center that our standard laser system of the LS series cannot meet? We develop together with our customers from stand-alone systems to integration into existing lines. In doing so, system know-how meets automation and laser technology: - robot solutions - portal variants - rotary table machines - sliding table systems - scanner solutions - integrated solutions based on VARIOMODUL® or, - at your request, on standard laser machines of the LS series For further information please take a look at our homepage.

The Matthews’ 10 watt and 30 watt C02 laser coding system permanently marks coated paper, plastics, rubber extrusion, and glass—making it ideal for a variety of industries. An affordable alternative to small character inkjet technologies, it cleanly marks alphanumeric text, date and time codes, serial numbers, barcodes, 2D codes and graphics.

Our Master Oscillator Power Amplifier – MOPA for short – series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power – whatever your application requires. Due to the special technical design of the laser system, it works in transversal single-mode operation with high peak-to-peak pulse power stability, medium medium power stability and short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The MOPA355-200 is a high-peak power MOPA with a peak pulse power of over 140 kW. It delivers 250 µJ single pulse energy and can operate at repetition rates up to 1 kHz. The pulse energy is adjusted via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technology.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The DSS1064-Q2 laser emits pulses with a pulse width of approx. 1.5 ns at 1064 nm and can be modulated from single shot to 10 kHz. The pulse energy is 20 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The DSS1064-Q1 laser emits pulses with a pulse width of approx. 1.5 ns at 1064 nm and can be modulated from single shot to 20 kHz. The pulse energy is 10 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The DSS1064-Q3 laser emits pulses with a pulse width of approx. 1.5 ns at 1064 nm and can be modulated from single shot to 2.5 kHz. The pulse energy is 50 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.

Our Master Oscillator Power Amplifier - MOPA for short - series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power - just as your application requires. Due to the special technical design of the laser system, it works in transverse single-mode operation with high peak-to-peak pulse power stability, good average power stability and a short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The MOPA355-500mW is a quasi-CW MOPA with a maximum repetition rate of 20 kHz. It delivers 25 µJ single pulse energy and an average power of up to 500 mW. The pulse energy can be set via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technologies.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The FDSS532-Q1 laser emits pulses with a pulse width of approx. 1 ns at 532 nm and can be modulated from single shot to 20 kHz. The pulse energy is 2 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.

Our Master Oscillator Power Amplifier - MOPA for short - series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power - just as your application requires. Due to the special technical design of the laser system, it works in transverse single-mode operation with high peak-to-peak pulse power stability, good average power stability and a short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The MOPA1064-2000 mW is a quasi-CW MOPA with a maximum repetition rate of 20 kHz. It delivers 140 µJ single pulse energy and an average power of up to 2 W. The pulse energy can be set via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technologies.

The CryLaS Q series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. This consists of an Nd:YAG resonator with a directly coupled saturable absorber which works as a passive Q-switch. The compact housing and easy operation make the lasers an optimum light source for applications that require minimal housing dimensions with highest performance. Based on the 1064 nm fundamental, harmonics are generated using non-linear (NLO) crystals that allow a wide spectrum of laser wavelengths from 1064 nm to 213 nm. The FQSS213-Q2 laser emits pulses with approximately 1 ns pulse width at 213 nm, and can be modulated from single shot to 10 kHz. The pulse energy is 0.1 µJ. CryLaS lasers impress with their easy installation, service-free operation and long service life. This makes them ideal for OEM applications and demanding laboratory setups.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The FQSS213-50 laser delivers 50 µJ pulse energy at a maximum repetition rate of 30 Hz and a pulse width of 1.3 ns, i.e. a peak pulse power of 40 kW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The FDSS532-Q2 laser emits pulses with a pulse width of approx. 1 ns at 532 nm and can be modulated from single shot to 10 kHz. The pulse energy is 6 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The FDSS532-Q3 laser emits pulses with a pulse width of approx. 1 ns at 532 nm and can be modulated from single shot to 2.5 kHz. The pulse energy is 20 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The FDSS532-Q4 laser emits pulses with a pulse width of approx. 1 ns at 532 nm and can be modulated from single shot to 1 kHz. The pulse energy is 42 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.

The CryLaS Q series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. This consists of an Nd:YAG resonator with a directly coupled saturable absorber which works as a passive Q-switch. The compact housing and easy operation make the lasers an optimum light source for applications that require minimal housing dimensions with highest performance. Based on the 1064 nm fundamental, harmonics are generated using non-linear (NLO) crystals that allow a wide spectrum of laser wavelengths from 1064 nm to 213 nm. The FQSS213-Q3 laser emits pulses with approximately 1 ns pulse width at 213 nm, and can be modulated from single shot to 2.5 kHz. The pulse energy is 1.5 µJ at 1 kHz. CryLaS lasers impress with their easy installation, service-free operation and long service life. This makes them ideal for OEM applications and demanding laboratory setups.

The CryLaS Q series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. This consists of an Nd:YAG resonator with a directly coupled saturable absorber which works as a passive Q-switch. The compact housing and easy operation make the lasers an optimum light source for applications that require minimal housing dimensions with highest performance. Based on the 1064 nm fundamental, harmonics are generated using non-linear (NLO) crystals that allow a wide spectrum of laser wavelengths from 1064 nm to 213 nm. The FQSS213-Q4 laser emits pulses with approximately 1 ns pulse width at 213 nm, and can be modulated from single shot to 1 kHz. The pulse energy is 2.5 µJ. CryLaS lasers impress with their easy installation, service-free operation and long service life. This makes them ideal for OEM applications and demanding laboratory setups.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The FQSS266-Q1 laser emits pulses with a pulse width of approx. 1 ns at 266 nm and can be modulated from single shot to 20 kHz. The pulse energy is 0.3 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life. This makes them ideal for OEM applications and demanding laboratory setups.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The FQSS266-Q2 laser emits pulses with a pulse width of approx. 1 ns at 266 nm and can be modulated from single shot to 10 kHz. The pulse energy is 0.8 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life. This makes them ideal for OEM applications and demanding laboratory setups.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The FTSS355-50 laser delivers 50 µJ pulse energy at a maximum repetition rate of 100 Hz and a pulse width of 1.3 ns, i.e. a peak pulse power of 60 kW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The FQSS266-200 laser delivers 200 µJ pulse energy at a maximum repetition rate of 20 Hz and a pulse width of 1.5 ns, i.e. a peak pulse power of 130 kW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The FQSS266-Q4 laser emits pulses with a pulse width of approx. 1 ns at 266 nm and can be modulated from single shot to 1 kHz. The pulse energy is 12 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The FTSS355-Q4 laser emits pulses with a pulse width of approx. 1 ns at 355 nm and can be modulated from single shot to 1 kHz. The pulse energy is 42 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The FDSS532-1000 laser delivers 1 mJ pulse energy at a repetition rate of 20 Hz and a pulse width of 1.8 ns, i.e. a peak pulse power of 550 kW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

The CryLaS High-Power series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. As the historically first development of CryLaS GmbH, the lasers are widely used in industrial and scientific application. They impress with their reliability, especially in the OEM business, and offer high pulse power with comparatively small housing dimensions. Thanks to frequency conversion, the lasers are available from IR to DUV. The FDSS532-150 laser delivers 150 µJ pulse energy at a maximum repetition rate of 100 Hz and a pulse width of 1.2 ns, i.e. a peak pulse power of 125 kW. CryLaS lasers impress with their simple installation, service-free operation and long laser lifetime. They are the ideal tool for OEM applications and demanding scientific lab use.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The FTSS355-Q1 laser emits pulses with a pulse width of approx. 1 ns at 355 nm and can be modulated from single shot to 20 kHz. The pulse energy is 0.3 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.

The CryLaS Q-series lasers are diode-pumped solid-state lasers (DPSS lasers) based on a microchip design. It consists of a Nd:YAG resonator with a directly coupled saturable absorber that works as a passive Q-switch. The compact housing and simple operation make the lasers an ideal light source for applications that require minimal housing dimensions with maximum performance. Based on the 1064 nm fundamental, non-linear optics (NLO optics) generate frequency multiples of this fundamental, covering a broad spectrum of laser wavelengths from 1064 nm to 213 nm. The FTSS355-Q2 laser emits pulses with a pulse width of approx. 1 ns at 355 nm and can be modulated from single shot to 10 kHz. The pulse energy is 3 µJ. CryLaS lasers impress with their simple installation, service-free operation and long service life.