Laser - Import export

KIRSCH Kunststofftechnik has specialised in lasering transparent or coloured plastics like acrylic glass, up to a maximum thickness of 20 mm. The advantage when cutting is a shiny edge which does not need to be polished afterwards. We are offering a variable processing size up to 2000 x 1500 mm. Following individual arrangements we are also able to process other plastics. Our laser can be programmed using common files, making your ideas and wishes nearly limitless.

The Laser Mini offers a selective measurement of methane without interfering cross-sensitivities. The device monitors itself and is therefore almost maintenance-free. Thanks to the menu navigation in conjunction with supporting displays of the measurement history, absolute value, etc., the Laser Mini is easy and safe to use even by inexperienced users. The Laser Mini only needs to be switched on.

We develop decoupled, partially or fully interlinked assembly processes entirely according to your requirements, using high-performance systems and state-of-the-art equipment. ou don't need deep-drawn individual parts, but complex assemblies that are already assembled? We are your experts! First we analyse your requirements for new potentials. Combined with innovative thinking and agile processes, we then design smart solutions with you to produce your desired assemblies. Depending on your requirements, we develop decoupled, partially or fully interlinked assembly processes using high-performance systems and state-of-the-art equipment. We reliably ensure your quality requirements with integrated and individual testing measures.

The Z+F PROFILER® 9012 A has a vertical 360° field-of-view and is the fastest profile imaging 2D laser measurement system in its class. With its scan rate of more than 1 million points per second and a maximum scanning speed of 200 profiles/sec. short distances between the profiles can be achieved even at high speeds of the carrier vehicle. Because of the high point density, even small objects are registered and processed by the software. Because the laser measurement system corresponds to laser class 1, the scanner can be used in urban environments without any restriction. A hardware-assisted pixel-by-pixel synchronization makes it possible to process signals form external devices. As a result, the position and orientation of the scan data can be determined.

The Z+F PROFILER® 9012 has a vertical 360° field-of-view and is the fastest profile imaging 2D laser measurement system in its class. With its scan rate of more than 1 million points per second and a maximum scanning speed of 200 profiles/sec. short distances between the profiles can be achieved even at high speeds of the carrier vehicle. Because of the high point density, even small objects are registered and processed by the software. Because the laser measurement system corresponds to laser class 1, the scanner can be used in urban environments without any restriction. A hardware-assisted pixel-by-pixel synchronization makes it possible to process signals form external devices. As a result, the position and orientation of the scan data can be determined.

Projects that have already been implemented range from the construction of a "low-cost - high efficiency" laser welding system with CNC axis control focused on customer-specific needs, handling systems, assembly concepts, modular cable shoes, small presses for individual parts (bulk) or continuous goods (stips) for less than 8,000 Euros ... Convince yourself and get back to us! www.mechaSYS.de

Laser welding is a very gentle welding technique, as the heat input takes place in a locally very limited area. In this way, it is possible to reliably connect critical components with one another in a materially bonded manner, without the parts annealing. With laser welding, the two welding partners are joined together with as few gaps as possible in order to then weld them together (e.g. press-fit zones such as EloPin® puzzled at any feed or distance). The background to this is that no additional material is generally used in laser welding. Exception for build-up welding or repair welding of e.g. broken tool parts such as punches or cutting plates or injection molding tools for abrasive plastics with glass fiber filling. Materials - almost all metals: e.g. • non-ferrous metals (Cu, CuSn0.15, CuSn6, CuNiSi, ...), • titanium, • steel, stainless steel (1.4301, 1.4404, ...), • spring steel (1.4310), • electrical steel (M235, M270, NO20, NO30, ...), …

When it comes to laser marking, the following types of marking are essentially differentiated: • temper colour: in the case of stainless steels and titanium, oxygen storage in the surface, • white engraving, • deep engraving, • Color removal e.g. of anodized layers for aluminum, • Color change of plastics (usually additives required in the plastic), • foaming of plastics, • ... The advantages of laser marking are on the one hand: • longevity, • Biocompatible for and in medical technology. In addition, laser inscription is: • individually designed, • space-saving thanks to data matrix code, • consecutive numbering can be generated (serial number, date of manufacture, ...), • cheap, as e.g. there are no mask costs compared to pad printing.

The CLICHE LASER Xi is equipped with state-of-the-art laser technology. Perfectly matched to the needs of pad printing, the direct imaging of high-resolution pad printing clichés takes place. The CLICHE LASER Xi has a cliché support table on which the clichés are fixed using T-slots. This allows an absolute positioning accuracy of the print image on the cliché. Due to the flat bed construction and the compact design of the machine, the set-up times in the laser system are massively reduced. In addition, the laser is low-vibration and this enables high engraving precision. A check of the diode power before imaging and, if necessary, calibration of the laser ensures a constant imaging quality. With the CLICHE LASER Xi not only all TAMPOPRINT INTAGLIO laser clichés can be produced at low cost, but also cliché formats of other manufacturers.

TAMPOPRINT offers you this cliché production station (bench top unit) at a top price-performance ratio. By updating this model the laser beam source was improved and the import functions were extended. The production of a laser engraved Aloxid-special cliché with the CLICHE LASER PLUS is the most economic laser engraved cliché production on the market and clearly superior to the laser plotter systems with regard to precision and speed. Software: Predefined parameters for the different cliché types that were exclusively developed by TAMPOPRINT. Generation and handling of data that can be laser engraved. Software ALFALAS® Laser Suite pre-installed.

With the procedure ”Mark-on-the-fly”, deployed in the MOF-PROMO HP, all kind of closures, made of most diverse materials, can rapidly be decorated with high precision inside, outside and on the sides. Through the compact design, the user-friendly equipment allows a problem-free integration as inline-variant in existing production lines for closures of all kinds. The laser system is available, depending on the type of application, as MOF-PROMO HP or MOF-PROMO HP 200 Fiber Laser.

Without the pad printing process, the production of everyday objects such as decorated light alloy wheels, or even vital items such as insulin pens would not be easily possible. In doing so, TAMPOPRINT develops and works on process printing solutions across industry boundaries. Thus, there is no such thing as the typical TAMPOPRINT customer or the typical application. Rather, the fields of application are characterized by their diversity, their complexity and their individual characteristics. They range from the simpler printing of toys such as model trains, to the labeling of household appliances and beverage bottles, to highly complex processes such as the micrometer-accurate labeling of medical products, e.g. insulin pens and laboratory tubes. Even the particularly challenging direct application of active pharmaceutical ingredients onto a carrier material, such as in nicotine patches, can be implemented thanks to the TAMPOPRINT solutions.

In our cliché factory, we have been working on new cliché materials and developing suitable imaging processes for decades. This means that today we can produce the optimum cliché for every application. Our years of practice enable us to respond to the special features of pad printing and use them to achieve the best result. Whether single or multi-color - we will be happy to advise you on the selection and ordering of your suitable tampon printing cliché for self-imaging or ready-to-print. In our in-house prepress department, our experts create finished print images from your artwork and ideas. With your approval, you will receive a print-ready result in the shortest possible time. Our TAMPOPRINT cliché range is suitable for all standard printing applications and tampon printing systems.

With its fast and innovative 98-laser-line mode, the FreeScan Trio is SHINING 3D's first marker-free laser 3D scanner. Less preparation, more efficiency. The FreeScan Trio's three additional laser scanning modes deliver unrelenting accuracy, each reaching up to 0.02mm with markers. This metrology device also features built-in photogrammetry to offer an impressive volumetric accuracy of up to 0.02mm + 0.15mm/m. Whether you need speed or accuracy on small or large assemblies, the versatile FreeScan Trio is geared for all your projects.

HERMA laser films have been developed especially for black/white and colour laser printers. With suitable colours, the surface yields good printing results with all standard printing methods. Label sheets are particularly suitable for product identification, e.g. barrel or pallet labelling. In combination with certain HERMA acrylate adhesives, this film meets the requirements according to BS5609 section 2 (seawater resistance).

Copy / laser papers should be as flat as possible during infeed, but then very pliable while passing through the photocopier or printer. They must ensure optimal printing quality on devices from many manufacturers as well as excellent toner keying. HERMA offers you practice-oriented solutions for your individual requirements.

DSMax is the fastest and highest definition laser line 3D displacement sensor on the market for acquiring images and inspecting products in 3D. It is the only sensor that offers: — High scan rates (up to 18 kHz) at full measurement range — Maximum resolution images (2,000 profile points) — Fast high dynamic range (HDR) image These features make it the ideal solution for measuring and inspecting very small parts, such as electronic components, which can contain highly reflective or dark features.