Hole punch - Import export

For conductor cross-sections from 0.14 up to 150 mm² (AWG 26 – 300 kcmil). Material: tin-plated copper. Tolerances according to DIN 46228 part 4

For conductor cross-sections from 0.14 up to 10 mm² (AWG 26-8). Material: tin-plated copper. Tolerances according to DIN 46228 part 4

Doypacks / Pouches are an economical, environmetal-friendly and a presentative packaging alternative against carton-compounds, blisters, glass packaging and tins. Food, pet food, sweets and hygiene articles are only few of the areas where such packaging is used. Some advantages of Doypacks are low purchase costs less transport weight and space less stock space for the packaging many possibilibities for presentation ⇒ standing / lying / hanging easy recycling since only consisting out of plastics Our Doypacks are suitable when needing high barrier and leak-proof properties when needing high strenth of the seams for the packaging of solids, powders, pastes and fluids Our Doypacks are available against your specifications regarding sizes and laminates out of laminates in different combinations – also with PET / ALU / PA with/without zipper with/without tearing notch with/without Eurohole / round hole or carrying punch-out unprinted or printed up to 10 colours by flexo or gravure...

iglidur® clip bearing, metric d1 [mm]: iglidur® clip bearing, inch d1 [inch]: iglidur® clip bearings are especially intended for the shaft bushing through plates. For this reason the bearing has a flange on each of the two front sides. After the clip-on the bearings are secured on both sides in the plate. The clip bearings have chamfered slot on the side that enables the mounting of the bearing on one side. After the mounting the bearing straddles and lines the bore in the plate. The shaft prevents the clip bearing from slipping out of the bore. The bearing cannot slip out of the bore even in axial movements. Extremely simple mounting through lateral slot Maintenance-free and self-lubricating Good flexibility in punch hole Good abrasion resistance Quiet operation Suitable for rotary and linear movements Extendibility through the slot Undetachable through double flange Special dimensions possible Plate thicknesses from 3 mm to 4 mm available from stock Material: iglidur® M250 Special properties of the iglidur® clip bearings iglidur® clip bearings are made from the most abrasion-resistant material, iglidur® M250. iglidur® M250 is a bearing material for rugged, wear-resistant bearing systems for medium loads. The bearings are self-lubricating and can be used dry. If required the bearings can also be lubricated. The material iglidur® M250 is resistant to all common lubricants. The iglidur® clip bearings are the ideal solution for bearing functions with low loads. The easy mounting makes it ideal for applications with difficult bearing locations. Compressive strength The permitted static surface pressure of iglidur® M250 amounts to 20 MPa at room temperature. Due to the good adaptability to uneven surfaces of the bearing housing, a high pressure load capacity of the clip bearings persists even in punched holes. For the most small bearing surfaces, the good vibration dampening properties and the insensitivity to misalignment are of primary importance. Surface speeds Clip bearings are particularly wear resistant in slow rotating, oscillating and axial motions. You can find the maximum gliding speeds for the various motions for the iglidur® M250 material under the materials data link shown below. A lubrication at installation or continuous lubrication raises the permitted surface speeds. Clip bearings are available from stock in dimensions of 3 to 25 mm. Fixation Triflex RS For mounting, the bearings are laterally pressed together with the large flange. The chamfered slot makes the bearing spiral-shaped, whereby it can be easily inserted in the plate. The remaining slot in the attached clip bearing can compensate for linear expansions of the circumference. Thus narrow bearing clearances are possible with clip bearings. The bearing clearance is dimensioned in such a way that in a housing bore with a nominal diameter, a shaft made with the same nominal diameter turns easily. The clip bearing can be used in H-tolerance housings up to H13. The turning of the clip bearing in the bore is also permitted. Operating temperatures The wear resistance of the iglidur® clip bearings are excellent with operating temperatures till 80°C. Even at low temperature the bearings remain elastic and abrasion resistant. When to use it? When a sheet metal feedthrough is required When the bearing should be captively clipped on in a drill hole with rough tolerance For rotating, linear and pivoting movements When a quick-mounting bearing solution is sought Clip bearings application examples When not to use it? When constant temperatures of more than +80°C occur iglidur® G When a high-precision bearing is needed iglidur® J When the housing bore is more than 4 mm long iglidur® Clips 2 iglidur® MKM When very high surface pressures occur iglidur® G iglidur® clip bearing, metric d1 [mm]: iglidur® clip bearing, inch d1 [inch]:

Punching knives in different shapes and sizes

Machine for shaping and punching holes in catheters. Working speed: Up to 5 cycles/min, about 1200 cycles/h.

Labelling systems can be integrated, whether it is laser, needle or inkjet, to mark and identify the tubes. Other options that can be integrated are welding seam detection, length control or measurement of processed tubes. The corresponding sensor and camera technology can be implemented for the specific product. The following step can be carried out without any problems, whether it is cutting, punching, deburring of holes or seal testing with external systems. Smart data evaluation All the systems can be equipped with different control and IPC panels. Interfaces to data caption systems for consumption and operation make the digitalization and evaluation of the data. Marking system, Welding seam detection, Camera control system, Internal and external cleaning processes, Cleaning and suction, Hole punching, Deburring – chamfering

Filling: The pre-opened bags-on-a-roll are opened manually or automatically by air blast and they are filled while still hanging on the roll. After filling, the bag is teared off and sealed. Lateral cardboard disks ensure the steady and exact unwinding of the roll. Holes can be punched in the bags, allowing air to escape during the packing process. The back of the bag can be coloured for better visibility of the bag’s content. A vertical tear-off perforation helps to re-open the filled bags. Applications: pre-opened bags on a roll are used wherever many small pieces have to be packed within a short time, e.g. in industries such as automotive, toys, plumbing parts, electronics, metal hardware, household products, medical and health care Order Quantity & Printing: Like all our packaging solutions, we offer our bags-on-a-roll in nearly every quantity, from small series to large production, printed with up to 10 colours or unprinted – directly from the manufacturer!

Useful information rack for A4, A5 or 1/3 A4 wire holders (not included). For this purpose, the brochure compartments are simply inserted into the small, punched holes of the metal surface. Furthermore, it can be equipped with plastic poster holders, see accessories. These adhere to the steel rack by means of glued magnetic strips. Posters and information can be changed very easily. Open pocket - insert poster - close pocket. Your information and brochures will be put into the right light with the optionally available halogen light. The information stand is available in a narrow and wide version. Prices without wire holders and poster pockets!

Self-clinching rivet nuts from series 10.455 and 10.456 are riveted into the component. A shaft is passed through a pre-punched hole in the component and riveted on the opposite side. The base material is not deformed in the process. These threaded fasteners feature serrated shafts that cut into the metal sheet surface, ensuring a high torsion resistance and torque load capacity. In addition to insertion with the aid of a press, these models can also be inserted using hand tools.

For conductor cross-sections from 0.14 up to 240 mm² (AWG 26 – 500 kcmil). Material: tin-plated copper. Tolerances according to DIN 46228 part 1

For conductor cross-sections from 0.5 up to 2.5 mm² (AWG 20 – 14). Material: tin-plated copper. Tolerances according to DIN 46228 part 4

For conductor cross-sections from 0.34 – 1.5 mm² (AWG 22 – 16) and 35 mm². Material: tin-plated copper.

For conductor cross-sections from 2 x 0.34 up to 2 x 16 mm² (AWG 2 x 22 – 2 x 6). Material: tin-plated copper. Tolerances according to DIN 46228 part 4

For conductor cross-sections from 2 x 0.34 up to 2 x 10 mm² (AWG 2 x 22 – 2 x 8). Material: tin-plated copper. Tolerances according to DIN 46228 part 4

For conductor cross-sections from 0.34 – 1.5 mm² (AWG 22 – 16). Material: tin-plated copper

Transparent punched pocket made from PP. With reinforced punched holes 45 x 65 x 45 + 80 mm. • Indelible punched pocket made from polypropylene • With reinforced punched holes • Punching: 45 x 65 x 45 + 80 mm for filing in A5 format ring binders • Open at the top • Format: A5 landscape

Punching of registration holes in light sensitive films for PCB manufacturing. The film is aligned by reference crosshairs shown on video monitors.

Strong and durable visible pocket for hanging or inserting with pre-punched hole pattern for attaching to various load carriers using optional accessories Tear-resistant and stretchable transparent foil with restoring capacity scanner-compatibl — DIN A5 Landscape - 8.3" x 5.8" — DIN A4 1/3 hoch Portrait - 8.3" x 3.9" — DIN A4 hoch Portrait - 8.3" x 11.7" Individual fastening — self-adhesive, for flexible adhesion even on uneven surfaces, removable without leaving any residue, reusable on supporting surfaces thanks to multi-use properties — for magnetic attachment even on offset or round surfaces such as lattice boxes or drums, vibration and shock resistant on machines and during transportation thanks to the strong holding power of the high-performance neodymium magnet fastening accesories — Lattice Box Clip — Plastic Pin — Compatible Plastic Tie Material: Plastic PVC Color: yellow, red, blue, green

Permanent fixation of a chip module is crucial for every smart card to meet the different demands of ID cards, banking cards, GSM /SIM cards, and dual interface cards. The GTL700 is a highly reliable and flexible solution for glue tape lamination of chip module tapes in preparation for the hot melt implanting process. The glue tape is laminated onto the backside of the module tape. To accommodate the chip, holes are punched into the glue tape prior to lamination. The system operates stand-alone or inline, and is suitable for a wide range of IC module tapes. Various punching and laminating tools are available, which can be exchanged with a few simple steps. Optional reel units allow use of an additional protection tape and separation of carrier tape. Highest yield, maximum machine uptime and short product changeover times lead to very low cost of ownership Up to 8,000 chip modules/hour High flexibility for all IC module types and sizes, including dual interface Adjustable...

Domes produced with ECKOLD machines in automotive industry make sure that there is only a minimum offset between the securing screws and the surrounding metal. ECKOLD machines can produce two or even three domes in a single process. Our dome embossing machines are suitable for both single and double sheet steel or aluminium parts and come with a hydro-pneumatic or servo motor drive system. With our machines, domes can be embossed without preliminary holes (even when combined with final hole punching for a defined diameter). This offer includes: Dome embossing frame Embossings: 1 piece/stroke Embossing geometry: according to data set Drive: pneumohydraulic Mechanical interface: support stand Embossing inserts are not included in the scope of delivery. They must be chosen separately, based on the actual task. We optionally offer hydraulic or servo motor drives as well as multiple embossings/stroke.

Automated punching plants are particularly economical for large quantities, offering excellent process safety. The ECKOLD range of punching machines includes automated punching units as well as portable and hand-held tools, thus catering for virtually any punching task. After a detailed evaluation of your punching task, we devise a solution that is not only economical but also perfectly adapted to match your requirements and workpiece specifications. This offer includes: • Pneumatic punching frame for fixing a cover • Stationary or robot-guided • Round hole, D = 3.5 • Integrated suction nozzle for scraps • Punching inserts • Assembly condition/interfaces: drilling pattern at c-frame • Connectable to cylinder, feed ejectors, initiators Tools are not included in the scope of delivery. They must be chosen separately, based on the actual task. Other drive types on request. Contact us for a customised offer!

KLN develops and manufactures punching machines with precise curve design at the surface, for example to punch holes for the distance sensor holders or lamps in lacquered bumpers. Realisation of high-precision round or angled holes, but protection of the part; also suitable for already lacquered surfaces.

ECKOLD Handformer HF 100 for stretching, shrinking, notching, hole punching, edging and clinching. The HF 100 makes forming easy, as it does away with time-consuming hammer beating. The HF 100 is able to stretch and shrink sheet metal and profiles up to 1.5 mm (steel) or 2.0 mm (Aluminium) in thickness. The Handformer is a stationary machine with a throat depth of up to 100 mm, and is mainly used in trade workshops. Apart from standard forming tools, ECKOLD offers tool inserts for notching, hole punching and edging as well as for clinching. • Adjustable working height • Quick tool change • Tool storage trays • Stop for precision guidance of workpieces • Also available with PA 80 pneumatic drive unit For our Handformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine). Max. forming capacity Steel 400 N/mm²: 1.5 mm Aluminium 250 N/mm²: 2.0 mm Inox 600 N/mm²: 1.0 mm Contact us for a customised offer, tools included!

ECKOLD Handformer HF 100 PA for stretching, shrinking, notching, hole punching, edging and clinching. When working with the HF 100 PA, you can use both hands to hold and guide your workpiece, while the precision strokes are triggered with a foot pedal. The Handformer HF 100 PA is therefore the ideal device for the forming of large, unwieldy workpieces. The machine is pneumatically driven and features a pressure control device to prevent tool overload. Each machining process is actuated by pressing the foot switch, whereby the stroke force is proportional to the force applied to the pedal. • Adjustable working height • Quick tool change • Tool storage trays • Stop for precision guidance of workpieces For our Handformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine). Max. forming capacity Steel 400 N/mm²: 1.5 mm Aluminium 250 N/mm²: 2.0 mm Inox 600 N/mm²: 1.0 mm Contact us for a customised offer, tools included!

ECKOLD Kraftformer KF 170 PD - Universal forming machine for stretching, shrinking, reforming, curving, planishing, flattening, doming, straightening, punching, notching and clinching. The Kraftformer KF 170 PD with pneumatic drive is the most compact of all ECKOLD Kraftformers. The machine is designed for single or continuous stroke operation for forming steel sheets with a thickness of up to 2 mm. Operated in single stroke mode, the KF 170 PD is the ideal machine for reworking and adjusting tasks. It can be used for punching, notching and clinching. In continuous mode, the KF 170 PD allows for fast and easy forming. In single stroke mode, it caters for precision hole punching, clinching and reworking! For our Kraftformers, we offer a wide range of tools (tools are not included in the scope of delivery of this machine). Max. forming capacity Steel 400 N/mm²: 2.0 mm Aluminium 250 N/mm²: 2.0 mm Inox 600 N/mm²: 1.5 mm Contact us for a customised offer, tools included!

Embossing punching is an important technique in the automated production of car parts, guided by robots. A laser system with a sensor harness measures the car body and its machining plane so that the embossing depth can be determined with maximum accuracy. The car body part is then embossed accordingly and all necessary holes are punched. Embossing punching is used for the fixture of headlights, bonnets, sliding roofs, boot lids and locks as well as wings. Our embossing punching machines are suitable for single-layer steel and aluminium sheet metal. This offer includes: • Embossing punching frame (assembly elements or components can be perfectly aligned to a mating part of different dimensions) • Handling: robot-guided via defined interfaces (mechanical, electrical, pneumatic) • Servo motor-driven Tool inserts and measurement are not included in the scope of delivery. They must be chosen separately, based on the actual task. Contact us for a customised offer!

Cable cover plates with increased mechanical protection Manufactured acc. to DIN 54841-5 Standard design: Material: PE-HD Length: 1.000 mm Surface colour: red Thickness: 10 mm Labelling: Achtung Starkstromkabel Longitudinal locking: with punched holes and connection pin Possible designs: Cover width: 100 mm to 290 mm Length: 300 mm to 3.000 mm Thickness: 3 mm to 12 mm Material: PE-HD or PVC-U Surface colour: yellow, blue, green, orange, black Longitudinal locking: with or without punched holes and connection pin Labelling: acc. to customer specifications

Holder for marker tags with punched holes for mounting with cable ties. Material PVC Colors Transparent. Temperature range Shape permanence from –30°C to +60°C (–22°F to +140°F). Resistance Flammability resistance according to UL94-V0. Resistance to chemicals meets Partex Product Test Program. Resistance to temperature and ageing meets norms of Partex Product Test Program. Attachment Cable tie