Connected process - Import export

Gas expansion thermometer NS 100/160, various process connections Features High quality case with bajonet ring NS 100/160, degree of protection IP 66 Nominal ranges -40 °C…700 °C, further nominal ranges from -200 °C...700 °C upon request Case and wetted parts of stainless steel Different connections can be supplied Temperature detecting element 6, 8 and ≥ 10 mm diameter Short immersion lengths of the temperature detecting element may be used Accuracy class 1 as per EN 13190 Micro adjusting pointer for indication correction EAC declaration (upon request) Options Explosion protection (ATEX) for mechanical devices Certificate of measuring equipment for Russian Federation Calibration certificate as per EN 10204 Case with liquid filling Electronical angle-of-rotation sensor, Type series PL1100, see data sheet D6-020 Connection to zone 0 with thermowells (upon request)

The ASEPTconnect Inline unit allows to install measuring instruments into pipes taking all requirements related to successful SIP and CIP procedures into account. The instrument connection is designed as Aseptic clamp connection per DIN11864-3, model A. Inline unit with aseptic clamp-connection per DIN 11864-3, model A (groove side), dead-zone free ■ Process connection: pipe ends or clamp-connection ■ Seals gap-free by means of an O-ring ■ Fast and accurate mounting of the devices ■ Various pipe diameters available ■ Hygienic design ■ Suitable for CIP or SIP procedures ■ Pipe ends suitable for orbital welding ■ Delta ferrite content < 0.5 %

"Kombibar" Combined pressure measurement device Features: Combination of diaphragm seal technology with pressure transmitter and mechanical gauge A wide range of variations can be realized All process connections of LABOM´s diaphragm seal portfolio available Redundant measurement of 2 devices in one process connection Options: Explosion protection for gases Optional with switch function

Features ■ Pressure transmitter for the measuring of relative and absolute pressures of gases, vapors and liquids ■ Stainless steel case in sturdy design, degree of protection IP 65/67 ■ Accuracy 0.1 % ■ High-resolution graphic display with Intuitive 4-button operation and backlight ■ Comprehensive parameterising and simulation and diagnostic functions ■ Nominal range 0.25 bar to 400 bar ■ Turndown up to 100:1 ■ Measuring rate up to 100 Hz ■ Output signal 4…20 mA with HART® protocol ■ Digital communication via PDM, FDT/DTM, 375/475 Field Communicator ■ Output functions: linear, invers, square root, table function ■ Media temperature -40…100 °C ■ Wetted parts stainless steel ■ Case design: process connection bottom or back ■ Process connections: various screw-in thread with internal diaphragm ■ Approved according to NAMUR 95 Options ■ Explosion protection; SIL2; material certificate and calibration certificate per EN 10204 ■ Degree of protection IP 69K

Temperature measuring transmitter for hygienic surface temperature measurement using clamp-on technology, for pipes with a diameter of 4 ... 300 mm and for tanks. For non-invasive temperature measurement High-resolution graphic display with intuitive user interface and background lighting Accuracy of 0.1% of the set measuring range Quick set-up function Measuring resistance Pt100 Process connection bottom or back According to 3A requirements Various clamping elements for process connection Temperature range -40 … 150 °C

High-resolution graphic display with backlight Intuitive 4-button operation Comprehensive parameterising functions Comprehensive simulation and diagnostic functions Quick access to device data Development according to SIL2 Nominal range 0.25 bar to 40 bar Turndown up to100:1 Measuring rate up to 100 Hz Accuracy 0.1 % Output signal 4…20 mA with HART® protocol Configuration memory Digital communication via PDM, FDT/DTM, 375/475 Field Communicator Output functions: linear, invers, square root, table function Table function with up to 64 support points Stainless steel case in hygienic design, degree of protection IP 65/67 Media temperature up to 160 ° C Wetted parts stainless steel Case design: - process connection bottom - process connection back Various hygienic process connections Approved according to NAMUR 95 EAC declaration (upon request)

This bourdon tube pressure gauge with switch function (electrical contact device) has been especially constructed for the operation with diaphragm seals. A custom bourdon tube that is reduced in volume produces a very slight temperature error. Diaphragm seals with reduced diaphragm surface areas may also be used. A large selection of LABOM diaphragm seals is available for a variety of applications. Bourdon tube pressure gauge for diaphragm seal and switch function Nominal range -1…3 bar to -1…15 bar, 0…4 bar to 0…400 bar High quality case with bajonet ring NS 100 Case, measuring element and pressure connection of stainless steel Instrumention connection welded with diaphragm seal Small temperature error by means of reduced-volume measuring element Process connection via diaphragm seal product group D5 Electrical contact device per DIN 16085 EAC declaration

Pressure transmitter PASCAL CV4 threaded connection, type series CV4100 Features Compact case of stainless steel in hygienic design according to recommendations from EHEDG and 3A, degree of protection IP 65/67 Accuracy ≤ 0.15 % High-resolution graphic display with Intuitive operation and backlight Quick access to device data Comprehensive parameterising, simulation and diagnostic functions Nominal range 0.25 bar to 400 bar Turndown up to 20:1 Output signal 4…20 mA with HART® protocol Output functions: linear, invers Table function with up to 32 support points (in preparation) Wetted parts stainless steel Process connection: screw-in thread with internal diaphragm Options Accuracy ≤ 0.1 % Explosion protection for gases and dust (in preparation) Classification per SIL2 (in preparation) Material certificate per EN 10204 Calibration certificate per EN 102044

Pressure transmitter/Pressure switch PASCAL CSfor general applications, Type series CS2100 Multifunctional pressure transmitter/pressure switch Degree of protection IP 65 4 digit LED display, can be mirror-imaged by 180° Indication module can be turned through 300° Measuring ranges 0…100 mbar to 0…40 bar rel., 0…1 bar to 0…6 bar abs, High pressure 0…60 bar to 0…400 bar Output signal 4…20 mA, 2-wire technology Accuracy: ≤ 0.2 % Easy to program locally (as per VDMA standard) Galvanic isolation between transmitter and switching outputs Various process connections Options 2 floating contacts Switching contacts with high switching current (1A) Inspection certificates - material certificate per DIN EN 10204-3.1 - calibration certificate per DIN EN 10204-3.1 Electrical connection rotatable by 300° Degree of protection IP 67

The resistance thermometer is suited for operation on tanks and pipings especially in hygienic applications. All standard types of process connections are available. Because of its robust design it is suitable for use in a great number of technological processes. The change in resistance, dependant on the measurement temperature, can be detected by a transmitter and converted into a standardized signal. A variety of transmitters for head mounting is available for different applications. For In-process calibration the integration of a special measuriung insert with additional test pipe is possible (data sheet T4-025-45,Type GA3100, reference sensor: data sheet T4-025-46, Type GA3110).

Resistance thermometer MiniTherm without thermowell Type series GA2730 Features For the installation in a separate thermowell Measuring insert spring loaded Compact and small design Measuring resistor 1 x Pt100 in 3- wire technology, class A Fast response Circular connector M12 or field housing Options Explosion protection Classification per SIL2 Certificate of measuring equipment for Russian Federation Transmitter can be integrated Process connection union nut G3/8“

The resistance thermometer is suited for operation on tanks and pipes. All standard types of process connections are available. The change in resistance, dependent on the measurement temperature, can be detected by a transmitter and converted into a standardized signal. A variety of transmitters for head mounting is available for different applications. For In-process calibration the integration of a special measuriung insert with additional test pipe is possible (data sheet T4-025-45,Type GA3100, reference sensor: data sheet T4-025-46, Type GA3110).

Features ■ Digital pressure transmitter with IO-Link V1.1 output signal ■ Data transmission rate COM 3 (230.4 kBaud) ■ Hygienic design as per EHEDG recommendation ■ Accuracy ≤ 0.3 % ■ Case and wetted parts of stainless steel, degree of protection IP 65 ■ Nominal range -400…400 mbar up to -1…100 bar ■ 2 switching outputs maximum Additional features ■ Approvals/Certificates - Material certificate per EN 10204 - Calibration certificate per EN 10204 - Roughness height rating with inspection certificate acc. to EN 10204-3.1 ■ Hygienic design ■ Wetted parts electropolished Application The pressure transmitter COMPACT with IO-Link is suited for measuring the relative pressure of gases, vapors and liquids. Due to the case design as per EHEDG recommendation and various process connections, the transmitter is suitable for the hygienic requirements of plant and machinery engineering.

The temperature switch GP2610 in clamp-on technology is intended for measuring the surface temperature of pipes especially in food/pharmaceutical/biotechnology applications. The output signal is connected to a digital PLC I/O port. ■ Various clamping elements for process connection ■ Hygienic temperature measurement for pipe diameters of 4…300 mm ■ Measuring system patented ■ High accuracy, fast response ■ Easy installation ■ No welding, no process interruption ■ No additional isolation required ■ Measuring insert can be recalibrated ■ Temperature switch with output signal 4 or 33 mA, 2-wire technology ■ Switch point setting by using a magnet; range from -40 to +150 °C ■ Switching point accuracy ± 0,5 K ■ Switching delay: 0 sec ■ Hysteresis 0.1 K ■ Switch state indicator with 2 LEDs (green light) ■ Electrical connection M12

MiniTherm GV4730 temperature transmitter hygienic design ◼Compact stainless steel case ◼Temperature measuring transmitter for installation in a separate thermowell in hygienic design ◼Temperature range -50 … 200 °C ◼Measuring insert, spring loaded ◼Compact, small design ◼High-resolution graphic display with intuitive user interface and background lighting ◼Accuracy of 0.1% of the set measuring range ◼Quick set-up function ◼Measuring resistance Pt100 ◼Process connection bottom or back ◼According to 3A requirements