Engine development - Import export

Together with our customers, we develop scalable control and automation solutions for their assembly, laser and ECM lines to meet their requirements. In doing so, we attach great importance to the topicality and future-proof development of the technology used. Programming under SIEMENS SPS, SIEMENS NC, BECKHOFF HMI and robot technology are our specialties. We are experts in realization drive and feedback control engineering, electrical project planning, control-cabinet construction, software development and control engineering.

When it comes to seat heaters, we at Embro think first and foremost of the textile processors of vehicle seats. Because our textile heating elements are in great demand in the automotive industry. They are easy to process, flexible, and kink-resistant. The heat output is individually adapted to the customer’s requirements in the development process and suitably distributed and laid out on the desired surface (wire laying). With the increasing number of electric vehicles being produced, the demand for further heating solutions for the interior area is also rising. Embro heating mats heat the seats and interior via heating elements in the center and side armrests and trim parts. As a developer or engineer in the automotive sector do you need a specific heating element for a product? We are looking forward to your ideas!

Takeover of the Torus gear technology In September 2016, MS-GRAESSNER GmbH & Co. KG acquired the entire technical expertise of TEDEC AG, Zofingen/Switzerland. Read more ... This results in an ideal synergy effect: state-of-the-art gear meshing technology combined with many years of experience in gear engineering. The further development of the TORUS gearbox (TorusGear), including series development, is thus guaranteed - also from the perspective of customer-specific applications. The owner-managed company MS-GRAESSNER GmbH & Co. KG is a manufacturer of high-precision servo angular gearboxes, with over 60 years of experience in drive technology. The products are used in particular in the fields of automation, robotics, electromotive, and mechanical and plant engineering.

The POWDRYER™ PD08 metal powder dryer is used to dry inorganic metal powder for the complex additive manufacturing (3D printing) process. It corrects the manufacturer’s fluctuating metal powder qualities, thus optimizing the metal powder’s flowability. It also reduces the number of air inclusions in finished workpieces. Significantly higher material densities are the result. Fields of application > Particularly for metal printing products where maximum strength is required > For the printing of alloys of aluminium, titanium, tool steel, etc. > Special tools for the metal-processing industry, machine and system engineering, prototype development, and more > Aviation, aerospace, and automotive industries, plus medical and dental technology

Modern engines in cars, trucks and two-wheelers differ significantly from their classic predecessors in terms of lubrication behavior and operating limits. With the constant further development of engines and lubrication technology, the requirements for engine oils have also changed. Modern oils have highly developed additives that can cause damage when used in classic cars. Our product portfolio of Castrol Classic Oils offers you and your historic vehicles an ideal engine oil selection for classic cars and historic vehicles. Castrol Classic Oi engine oil is manufactured in modern production facilities based on the respective state of technical development of the various automotive eras and supplemented with optimized additives. Our Classic advisory team will find the right Castrol Classic Oil for you, taking into account the individual manufacturer specifications and the optimum viscosity for your vehicles.

CLAMPING DEVICES FROM THE EXPERTS. SAMAG OFFERS PROCESS-OPTIMIZED SOLUTIONS AND A COMPLETE ALL-ROUND SERVICE WHEN IT COMES TO DEVICE CONSTRUCTION. Complete machining of workpieces begins with the right clamping concept. Our engineers develop innovative solutions and clamping devices at the highest technical level. Processing complicated workpieces in efficient cycle times requires process-optimized clamping. We deliver technological solutions with longevity and all-round service. The workpieces are aligned, fixed and clamped hydraulically, pneumatically or mechanically. If several parts are processed at the same time, depending on the number of motor spindles, high-precision fixing, positioning and clamping of the parts is necessary. This is only possible with automated tensioning (e.g. hydraulic) and precise alignment of the devices.

Our excellent reputation motivates us to tackle new challenges every day With the qualities EFFBE 295 and EFFBE Urelast®, EFFBE sets new standards in the service life and settling behavior of elastomer springs. Our elastomer springs stand for many years of permanently elastic and unbreakable use, for example in cutting and punching tools. Our customers around the world appreciate the quality of the EFFBE product ranges, which also offer a favorable price-performance ratio and high cost-effectiveness due to zero maintenance. Awareness of our excellent reputation motivates us to tackle new challenges every day. That's why our engineers and designers develop customized parts for you, if our standard ranges are unable to solve your problem. Elastomer compression springs are regulated by the standard DIN ISO 10069-1. Our qualities EFFBE 295 and EFFBE Urelast® meet this DIN standard and even surpass it in terms of service life and settling behavior.

The SAE J1939 standard (Serial Control and Communications Heavy Duity Vehicle Network) has originally been designed by SAE International to be used in heavy duty vehicles. In the meantime, the protocol is widely used also in agricultural machinery, rail vehicles and sea vessels and in a wide range of diesel-driven machinery. Target group J1939 training The target group of the J1939 intensive workshop is development engineers who are looking for a quick start into handling the communications profile or would like to get an insight into the J1939 protocol stack. Also, we address decision makers and product managers to enable them to assess the suitability of the J1939 protocol stack for their applications.

CAN (Controller Area Network) is a network concept that has been developed for the automotive industry originally. Today, CAN is especially used in networking industrial control systems, sensors and actuators based on the field bus technology. In our CAN-bus training you will learn about the physical properties of a CAN-bus system as well as protocol structure. The participants will look into the theory of hardware and software design and improve their knowledge in practical units. This CAN-bus training course forms the basis for our advanced-level workshops on CANopen and J1939. Target group CAN-bus training The target group of the CAN-bus workshop is development engineers who are looking for a quick start into the ISO standard 11898-1:2015 (Road vehicles – Controller Area Network). Also, we address decision makers and product managers to enable them to assess the suitability of the CAN-bus standard for their applications.

With CANopen, the user organization CAN in Automation (CiA) has created a protocol standard which has widely spread in embedded systems and mechanical engineering. CANopen specifications not only define various services for data exchange, they also specify standardized access to the systems via device profiles and application profiles. Target group CANopen training The target group of the CANopen workshop is development engineers who are looking for detailed knowledge about the communication profile or would like to get an insight in the CANopen / CANopen FD protocol stacks.

MFZ SERIES – FIT 2 PART – YOUR TASK DEFINES OUR MACHINE. Highest performance and output per square meter, at the same time lower costs and higher productivity – that was the task for our engineers and developers at SAMAG MachineTools. The result: the MFZ series with FIT 2 PART. The conception of the new series leaves nothing to be desired. Technological know-how - for the highest precision with the greatest possible productivity - coupled with passion and innovation, means we create the opportunity to continue adapting the performance of our MFZ machine tools to your workpiece in the future - FIT 2 PART! Whether they have complicated workpiece dimensions or are looking for the optimal quantity solution with minimal machine investmen

Our gwk engineers are passionate about developing technical solutions and this is what we as manufacturers want to prove in the area of cooling towers with our gvk/ghkv series. We see it as our task to understand the entire process of our customers. Therefore we have focused on quality and longevity for the products gvk/ghkv. The cooling towers are part of a central cooling tower system, supplied turn-key and regulated with a freely programmable microprocessor control system or programmable logic control. They are used for dissipation of excess heat from production systems with a higher temperature level and they operate on the principle of evaporation. This is an important consideration for environmentally conscious industries.

Solutions for the transport and handling of parts. The question of how surface coating plants can be optimally integrated into a production environment arises with ever increasing frequency. Rippert offers its customer an ‘everything from one source solution’ here. The company’s own engineers develop coordinated solutions for the transport and handling of parts together with the customer. Simulation is thereby often the right tool for recognising the full potential of these possibilities. From frying pans to heavy workpieces from the wind power sector, Rippert has already ‘taken it all in hand’. We work on concepts in which industrial robots substitute or supplement the classic conveying equipment in coating plants. For handling tasks we often see the necessity for systems that work adaptively; this means that, for example, image processing systems must recognise the accurate position of parts in two and even three-dimensions so that a robot can pick up inaccurately positioned parts.

The chip cooler of the HXB series by SEPA EUROPE is a compact combination of fan and heat sink and is an attractively priced combination with an adequate cooling capacity. But the development engineers at SEPA EUROPE wanted to go further and this pushing ahead marked the birth of the 3DQler. The cooperation with the experts of APWORKS provided the decisive impulse. Due to the metal 3D printing, also known as additive manufacturing, APWORKS is in the position to produce geometrically highly complex heat sinks. Without having to change the external dimensions or make the fan more powerful, the additively manufactured version can be realized with 30% more efficient waste heat. With the 3DQler, SEPA EUROPE and APWORKS have developed a modern and active cooling concept that offers numerous advantages: Freedom of design with regard to installation space and a reduction of the manufacturing costs.

SCHOCK develops custom-engineered solutions that successfully stand out from the market with innovative ideas and comfortable features. With long experience and expertise, we design high-quality products with individual additional benefits

with adjustable humidity and temperature to simulate the environmental conditions of a test specimen (e.g. household appliances, heating technology) The basis is a standard or climatic chamber (e.g. test kitchen, environmental simulation) with adjustable air humidity and temperature. On the basis of decades of experience in automotive test engineering, EP-E developed a concept in which the air flows in a circle (loop design). The result is a very excellent homogeneous temperature and humidity distribution. Through precise temperature and humidity control, it is possible to set different combinations of air conditioning and thus precisely adjust the required test conditions. The determination of the air flow (exhaust air volume) is carried out via a measuring section with the use of Laminar Flow Elements (LFEs). In order to determine the volume flow, pressure and temperature sensors are used to determine the air volume flow of the climatic chamber(s).

tergumed 710 – the new star in back treatment Our biomechanics, development engineers and software developers have been working on the further development of the 5 test and training machines as well as on the software for more than two years. Many innovative details have improved ease of operation, software and quality. The seat inclination adjustment, for example, allows for a larger range of positioning options. The electric seat height adjustment clearly eases daily work. The integration of the new tergutrain software provides simple, intuitive testing, creation of training plans, as well as a clearly arranged presentation of all test and training results. The feedback training with individually specified movements ensures an optimal training result. Thus, our successful back training line offers to you and your patients an even more effective and sustainable therapy success in the future. Combating back pain systematically Today, more and more people are suffering from a lack...

FMS, a METZEN Industries brand, has decades of experience building machinery and equipment. FMS manufactures machinery and equipment solutions from one-off products to medium-sized batches. Up to 20t without mechanical engineering Up to 20t including milling Up to 7.5t including turning Machinery construction On top of individual components and ready-to-install units, we also manufacture complete machines, including regulation and control technology. Our senior engineers develop them from planning and design to project management and installation, finishing with the complete operating documentation.

Testing plants in the area of bulk material processing Innovations made by Ebbecke Verfahrenstechnik To create a product exactly according to the ideas of the customer, standardized procedures are sometimes not enough. That’s why customers come from all over Europe to Ebbecke Verfahrenstechnik AG in Central Hesse – because our engineers are prepared to develop entirely new process engineering methods. With the new and further development of procedures and machines we are at the same time opening up alternative business areas for our customers. Testing and development without financial risk With all technical developments, our engineers keep the efficiency of the processes in sight. Because one thing is clear: An innovation can only prevail on the market if the development and subsequent purchase price remain within defined economic boundaries. This is where Ebbecke Verfahrenstechnik AG has been impressing for years with its pilot plants as centers of in-house development work. Toget

and HSK-25 tool interface. To meet the ever growing demand for compact and process-reliable high-frequency spindles – for micro chipping applications in dental and medical technology, as well as in the fabrication of molds and tools – our experienced engineers have developed the SD4064 spindle. Compact design, resulting in less weight High-performance motor thanks to synchronous technology Consistent torque from 500 rpm. Motor feedback - SIN / COS sensor Maximum motor mount rigidity Highest possible concentricity <2µm Flange adaptor upon customer request Optional dilatation sensor Spindles are not sold on the Webshop, but spindle inquiries are accepted. Below on this page are listed the available accessories and peripherals.

Screening The right screening procedure for any size and virtually any bulk material Ebbecke Verfahrenstechnik AG has the right plants and a know-how developed over decades for the best screening results with virtually any bulk material. For this reason, customers come to us for contract screening from the cosmetics, pharmaceutical, food, chemical and animal feed industries. Cutting-edge technology As a contract screening company active for many years we know what the priorities are for our customers. For these needs, we have self-developed our contract screening plants from Planoscreen and Planodry types. With these advanced contract screening plants not only can we screen contaminate-free , we can at the same time dry the screened product under a nitrogen atmosphere or a pressure cascade. In addition to the machines and process engineering plants that we have developed we also screen on systems from other manufacturers. For this completely different screening procedures are used d

Our specialists in the fields of mechatronics, control engineering, programming, and software development closely cooperate in the development phase. With the support of professional development tools – such as EPLAN P8, SolidWorks, SolidCAM, SolidWorks Simulation – these jointly developed conceptions will then be translated into design and work plans.

Our customers can chose between more than 500 products and solutions. In addition to this, our modular product components can be combined in order to realize customer specific requirements. For a speedy implementation of customer specific requirements we offer our customers an individual application engineering support. Our system- and development capabilities include: You can find detailed information about the POLIFILM product assortment of surface protection films under the specific surface- / application segment

The quality of a raw material in a natural deposit is uniform only in the ideal cases. Very often the quality of the raw material in the natural deposit and its extraction process varies. This has ramifications on subsequent mining processes. In addition to the changes in particle size and the properties of the stone material, the type and amount of the unwanted material especially can have a considerable negative impact on the result of the washing process. A material that is not sufficiently cleaned can lead to technical problems in subsequent downstream processes, which can lead to a product that requires further processing or one that can be marketed only at a lower price. Despite all the obstacles in creating a uniform, profitable and saleable product, we offer our customers an expert process analysis along with functional models. After completing such an analysis we have the opportunity to develop a process engineering solution for optimising the plant. Another area is...