Density measuring - Import export

Microwave spectrometer, Continuous In Line measurement of density and dry matter Description The microwave measurement generate an electromagnetic wave of low energy. This signal is coupled via an antenna into the product (Paper, Tobacco, Sand, etc.). Depending on the dielectric properties of the product the signal propagates in the product. After the signal has passed the product a second antenna receives the signal (Transmission). Amplitude and phase shift of the received signal are an expression for the water content or dry matter of the product. The microwave measurement is very stable and it has a quick response to product changes.

NIR LED– Technology, Continuous InLine density measurement Description The HK8 Series are NIR (Near Infrared) LED InLine measurement devices with state–of–the–art technology. The devices are used on conveyor belt, in pipelines (connection via flowthrough measuring cell or flange) and in tanks / vessel. Through the modular construction (Sensor and evaluation unit are separate), the sensor can be installed at a difficult accessible places and the evaluation unit can be installed at a well accessible place. This ensure the easy handling. The modular construction makes the operation of the HK8– Series very easy.

Microwave Resonator, Continuous In Line Moisture measurement Description The microwave resonance measurement uses the electromagnetic energy stored inside a resonator to determine the water content of a product. Via a non conducting window, the resonator field is coupled into the material located in front of the resonator. This so called leakage field is not radiated. Depending on the dielectric properties of the product, the shift of resonance frequency and bandwidth of the resonator is used for measurement. The ratio of bandwidth and frequency shift is density independent. The measurement is highly suitable for bulk material.

SMALL IN SIZE AND PRICE, BIG IN PERFORMANCE STM-2 combines the simplicity of USB connectivity with the accuracy of a precision measurement engine, all in a compact, inexpensive package. The size and simplicity of STM-2 help make setup and operation easy and efficient. SUPERIOR PERFORMANCE STM-2 is the most accurate USB powered thin film monitor in the industry. Ten measurements are taken per second while achieving a resolution of 0.037 Å per measurement (density of 1). EASY AND FLEXIBLE INSTALLATION STM-2 comes with everything you need to connect your QCM sensor/feedthrough to a Windows® PC. Simply connect the included BNC cable from the feedthrough to STM-2, then connect the STM-2 to your PC using a standard mini USB cable (included). No external oscillator or power supply is required. STM-2 features an internal oscillator that allows for simple and cost effective installation when STM-2 is located within 1 m (40 in.) of the quartz crystal. A standard INFICON® oscillator...

SIMPLE OPERATION FOR MANY APPLICATIONS STM-2XM is a two channel rate/thickness monitor that combines high accuracy with flexible programming and easy operation at an affordable price. STM-2XM is equipped with five operation modes to accommodate processes from simple to complex. For example, use simple mode to monitor just one single sensor for the simplest process or use alloy mode for codeposition monitoring. Independent mode allows STM-2XM to function as two completely separate monitors. Two sensor inputs allow for the use of two single or one dual quartz crystal sensor. 10 measurements are taken per second while achieving a resolution of 0.037 Å per measurement (density of 1). FEATURE PACKED STM-2XM has eight programmable digital inputs, eight programmable digital outputs, and four analog outputs allowing for a level of integration usually reserved for more expensive instruments. Programmable features include shutter delay, time/power monitoring, and rate sampling. Use...

Critical measuring tasks require specific density measuring instruments adapted to the individual requirements of our customers. For this purpose we offer tailor-made solutions according to the varying needs of our customers. Technical specifications • models approved for fiscal metering • high pressure models • high temperature models (up to 210 °C) • high precision models meeting specific customer requirements • models whose electronic components may be mounted separately (e.g. for mounting on walls or pipes) • density measuring units with protective housing • special models with flow rate up to 100 l/m (higher flow rate on request) Density measuring unit built into a protective housing incorporating a sight glass optionally available with • pump • flow monitoring • connection to rinsing equipment • strainer • gas detector • heating • equipment for base or wall mounting Advantages • complete solution from one source

For applications in laboratory, medical and engineering, where limited space, monitoring fluid quality and costs play an important role, they provide an ideal, previously not achievable solution. Technical specifications • hose connector • accuracy ± 1 kg/m³ • reproducibility 0,1 kg/m³ • operating temperature 0°C to +70°C • measuring range density 500-1500 kg/m³ • measuring flow 1-6 l/min Accessoires • strainer • gas separator • plug

Your benefits Optimum combustion efficiency Easy of mind due to long term experience and marine type approvals Competitive price Adaptable to own requirements No need for recalibration Areas of application The measurement and control of fuel oil viscosity is a known requirement within the marine and diesel engine industries. The HFVM measures liquid viscosity, density, and temperature in aggressive environments. These meters use vibrating fork technology for reliable direct-insertion measurement. HFVMs provide Heavy Fuel Oil (HFO)/Marine Gas Oil (MGO) combustion control, and oil-fired heater and boiler control.

Density Meter EDM 4000+ with Controller The technical specifications are in accordance or exceed the requirements by the European and American Pharmacopeia and various ASTM, ISO and DIN standards, GLP/GMP, 21 CFR part 11 User-friendly and customizable software. Up to 1000 methods can be programmed and further S + H devices connected. Customs Tariff Item : 9025 8040 HS / EU Country of Origin : Federal Republic of Germany Technical data Measuring range Density: 0 - 3 g/cm3 Temperature: 5 - 95°C (regulated Peltier thermoelement) Pressure: 0 to 10 Bar (0 to 145 psi) Density Resolution: 0.0001 g/cm3 Precision: ± 0.0001 g/cm3* Repeatability: ± 0.0001 g/cm3 Temperature Resolution: 0,01°C Precision: ± 0,05°C Repeatability: ± 0,02°C Measuring time: < 30 sec. ** Sample volume: approx. 1.5 ml Filling: By injection Bubble detection: combined visual – electronic Operation: Touchscreen, Keyboard /Mouse /Barcodereader /Remote via PC User Interface / Display: 7" color touchscreen, 800 x 48o...

Density Meter EDM 5000 with Universal-Display (L-Controller) The technical specifications are in accordance or exceed the requirements by the European and American Pharmacopeia and various ASTM, ISO and DIN standards, GLP/GMP, 21 CFR part 11 User-friendly and customizable software. Up to 1000 methods can be programmed and further S + H devices connected. Customs Tariff Item : 9025 8040 HS / EU Country of Origin : Federal Republic of Germany Technical Data Measuring range: Density: 0 - 3 g/cm3 Temperature: 0 - 95°C (regulated Peltier thermoelement) Pressure: 0 to 10 Bar (0 to 145 psi) Density Resolution: 0.00001 g/cm3 Precision: ± 0.00005 g/cm3* Repeatability: ± 0.00001 g/cm3 Temperature: Resolution: 0.001°C Precision: ± 0.03°C Repeatability: ± 0.01°C Measuring time: < 30 sec. ** Sample volume: approx. 1.5 ml Filling: By injection Bubble detection: combined visual – electronic Operation: Touchscreen, Keyboard /Mouse /Barcodereader /Remote via PC User Interface / Display: 7"...

The traversable straddle gauges are used for offline measurement. They are placed onto the roll and moved manually, thereby measuring the form of the rolls from crown edge to crown edge. They are characterised by a high measurement point density of 1 mm and a high repetition accuracy of ± 2 µm. With the evaluation software optimised over decades together with our customers for this application, curves can be pivoted and superimposed, centered and smoothed. The scope of supply also includes a panel PC.

VFM60MV multivariable vortex flowmeters is an integral solution for mass flow /standard flow measurement of steam and gas. Integrated pressure and temperature sensors for density compensation, so it can also measure temperature, pressure, density, mass flow and standard flow. User would only need one flowmeter to measure and read all this parameters, this advantage leads to lower cost and maintaining.

-continuous control of sulfuric acid density in your lead accumulators -also for measurements in VRLA batteries (AGM) -measures the acid density in a range of 1.05 -1,4 g/cm3 -length of sensor rod 300 mm, diameter 4 mm -length from 50 mm to 700 mm Additionally we offer the display for 160€

The TSSR-Meter can be used to perform conventional isothermal relaxation measurements as well as Temperature Scanning Stress Relaxation (TSSR), an anisothermal stress relaxation measurement method (AISR method). This method can be used to characterize the mechanical-thermal properties of elastomers. An important factor here is the determination of the cross-linking density. With the ever increasing demands on materials, the determination of crosslinking density is an important advantage, and therefore the TSSR meter is particularly suitable for material development and quality control during production.