Density measuring - Import export

Single instrument for simultaneous process density, viscosity and temperature Monitor even gas density and viscosity Accurate measurement in the harshest of conditions Operational to 15,000 psi (1000 bar) & 400 °F (200°C) Full Titanium Grade 5 construction High accuracy for gas density and viscosity monitoring Available for LNG and natural gas density monitoring

Single instrument for simultaneous process density (specific gravity), viscosity and temperature measurement Compact form-factor for simple installation Real-time, stable, repeatable and reproducible measurements in Newtonian & non-Newtonian fluids Measures kinematic and dynamic viscosity All metal (316L Stainless Steel) construction Completely insensitive to mounting conditions Operational to 7500 psi (500 bar) and 575°F (300°C) Threaded, flanged and sanitary process fittings Easy to clean, no maintenance or re-configurations needed Scale across multiple locations/installs without application re-engineering

Raw materials arriving at our warehouse come to the quality control laboratory in accordance with the sampling procedure, and if the analysis results are found appropriate, their entry into the company is approved. Raw materials are analyzed based on European Pharmacopoeia 10.8 methods, based on certain control criteria. These controls; visual control, solubility control, density determination, moisture determination, pH determination, viscosity determination. After the approvals, weighings are carried out in accordance with GMP in a special weighing room equipped with HEPA filters and humidity controls. The controls made on finished products are; visual control, solubility control, organoleptic control, volumetric and quantitative control, moisture determination, pH measurement, density determination, viscosity determination, hardness determination, diameter-thickness measurement, quantification (HPLC), gas chromatography.

Microwave spectrometer, Continuous In Line measurement of density and dry matter Description The microwave measurement generate an electromagnetic wave of low energy. This signal is coupled via an antenna into the product (Paper, Tobacco, Sand, etc.). Depending on the dielectric properties of the product the signal propagates in the product. After the signal has passed the product a second antenna receives the signal (Transmission). Amplitude and phase shift of the received signal are an expression for the water content or dry matter of the product. The microwave measurement is very stable and it has a quick response to product changes.

NIR LED– Technology, Continuous InLine density measurement Description The HK8 Series are NIR (Near Infrared) LED InLine measurement devices with state–of–the–art technology. The devices are used on conveyor belt, in pipelines (connection via flowthrough measuring cell or flange) and in tanks / vessel. Through the modular construction (Sensor and evaluation unit are separate), the sensor can be installed at a difficult accessible places and the evaluation unit can be installed at a well accessible place. This ensure the easy handling. The modular construction makes the operation of the HK8– Series very easy.

Continuous flow measurement of powder or granules in high pressure densephase conveying. Designed to measure solid flows during pneumatic dense phase transport. The sensor measures density and speed. • pressureresistant up to 64 bar • maintenancefree • contactless • ATEX category 3 approved

Continuous solids mass flow measurement in densestream conveying and high levels of throughput. Designed to measure solid flows during pneumatic dense phase transport. The sensor measures density and speed. • unlimited throughput volumes can be measured • no wear thanks to the ceramic inner pipe • simple retrofitting • maintenancefree

Microwave Resonator, Continuous In Line Moisture measurement Description The microwave resonance measurement uses the electromagnetic energy stored inside a resonator to determine the water content of a product. Via a non conducting window, the resonator field is coupled into the material located in front of the resonator. This so called leakage field is not radiated. Depending on the dielectric properties of the product, the shift of resonance frequency and bandwidth of the resonator is used for measurement. The ratio of bandwidth and frequency shift is density independent. The measurement is highly suitable for bulk material.

SMALL IN SIZE AND PRICE, BIG IN PERFORMANCE STM-2 combines the simplicity of USB connectivity with the accuracy of a precision measurement engine, all in a compact, inexpensive package. The size and simplicity of STM-2 help make setup and operation easy and efficient. SUPERIOR PERFORMANCE STM-2 is the most accurate USB powered thin film monitor in the industry. Ten measurements are taken per second while achieving a resolution of 0.037 Å per measurement (density of 1). EASY AND FLEXIBLE INSTALLATION STM-2 comes with everything you need to connect your QCM sensor/feedthrough to a Windows® PC. Simply connect the included BNC cable from the feedthrough to STM-2, then connect the STM-2 to your PC using a standard mini USB cable (included). No external oscillator or power supply is required. STM-2 features an internal oscillator that allows for simple and cost effective installation when STM-2 is located within 1 m (40 in.) of the quartz crystal. A standard INFICON® oscillator...

SIMPLE OPERATION FOR MANY APPLICATIONS STM-2XM is a two channel rate/thickness monitor that combines high accuracy with flexible programming and easy operation at an affordable price. STM-2XM is equipped with five operation modes to accommodate processes from simple to complex. For example, use simple mode to monitor just one single sensor for the simplest process or use alloy mode for codeposition monitoring. Independent mode allows STM-2XM to function as two completely separate monitors. Two sensor inputs allow for the use of two single or one dual quartz crystal sensor. 10 measurements are taken per second while achieving a resolution of 0.037 Å per measurement (density of 1). FEATURE PACKED STM-2XM has eight programmable digital inputs, eight programmable digital outputs, and four analog outputs allowing for a level of integration usually reserved for more expensive instruments. Programmable features include shutter delay, time/power monitoring, and rate sampling. Use...

The RECOVIB.SHIVER are outdoor stations dedicated to the monitoring of site emission levels and able to report vibration, particle density and air pressure. The SHIVER devices are linked to the recovib.io platform (Micromega Dynamics Cloud Software) in order to offer a near real-time reporting solution with norm comparison. The use of SHIVER devices ensures environmental and workplace compliance and helps to maintain good relationships with neighboring people and businesses. Monitoring of buildings close to quarries following blasting activities generating vibration and/or air overpressure Monitoring of buildings, sensitive equipment and the comfort of residents following surrounding construction work Monitoring of buildings, sensitive equipment and the comfort of residents exposed to road and railway traffic noise Vibration velocity, particle density and air overpressure measurements

The HGF Handgausmeter is an easy to use precision instrument. The superfine 1mm probe magnetic flux densities can be measured extremely close to the magnetic pole and in very narrow air gaps. The HGF can be switched between AC and DC magnetic fields as well as between units Gaus and Tesla. At the edge of the display the pending polarity N/S is in the mode "DC magnetic fields" constantly displayed, the "peak indicator" facilitates the search for magnetic surfaces for example, in tracking down unwanted residual magnetism. The package includes in addition to the meter, the 1mm transversal probe and the batteries and a protective case and a protective cap for the probe. Thus, HGF is also suitable for use in the service industry. Our technicians use it for testing of heavy lifting magnets and clamping systems.

Critical measuring tasks require specific density measuring instruments adapted to the individual requirements of our customers. For this purpose we offer tailor-made solutions according to the varying needs of our customers. Technical specifications • models approved for fiscal metering • high pressure models • high temperature models (up to 210 °C) • high precision models meeting specific customer requirements • models whose electronic components may be mounted separately (e.g. for mounting on walls or pipes) • density measuring units with protective housing • special models with flow rate up to 100 l/m (higher flow rate on request) Density measuring unit built into a protective housing incorporating a sight glass optionally available with • pump • flow monitoring • connection to rinsing equipment • strainer • gas detector • heating • equipment for base or wall mounting Advantages • complete solution from one source

For applications in laboratory, medical and engineering, where limited space, monitoring fluid quality and costs play an important role, they provide an ideal, previously not achievable solution. Technical specifications • hose connector • accuracy ± 1 kg/m³ • reproducibility 0,1 kg/m³ • operating temperature 0°C to +70°C • measuring range density 500-1500 kg/m³ • measuring flow 1-6 l/min Accessoires • strainer • gas separator • plug

Your benefits Optimum combustion efficiency Easy of mind due to long term experience and marine type approvals Competitive price Adaptable to own requirements No need for recalibration Areas of application The measurement and control of fuel oil viscosity is a known requirement within the marine and diesel engine industries. The HFVM measures liquid viscosity, density, and temperature in aggressive environments. These meters use vibrating fork technology for reliable direct-insertion measurement. HFVMs provide Heavy Fuel Oil (HFO)/Marine Gas Oil (MGO) combustion control, and oil-fired heater and boiler control.

The Gammapilot FMG50 compact transmitter is designed for non-contact point level detection, continuous level, interface and density measurement in liquids, solids, suspensions or sludges. As the first true 2-wire loop powered compact transmitter it minimizes engineering and installation efforts.

The straight single-tube design of Promass I provides in-line viscosity measurement in addition to mass flow, density and temperature measurement. With its innovative remote transmitter Promass I 500 maximizes installation flexibility and operational safety in demanding environments. Heartbeat Technology ensures compliance and process safety at all times.

The straight single-tube design of Promass I provides in-line viscosity measurement in addition to mass flow, density and temperature measurement. With its compact transmitter Promass I 300 offers high flexibility in terms of operation and system integration: access from one side, remote display and improved connectivity options. Heartbeat Technology ensures compliance and process safety at all times.

Density Meter EDM 4000+ with Controller The technical specifications are in accordance or exceed the requirements by the European and American Pharmacopeia and various ASTM, ISO and DIN standards, GLP/GMP, 21 CFR part 11 User-friendly and customizable software. Up to 1000 methods can be programmed and further S + H devices connected. Customs Tariff Item : 9025 8040 HS / EU Country of Origin : Federal Republic of Germany Technical data Measuring range Density: 0 - 3 g/cm3 Temperature: 5 - 95°C (regulated Peltier thermoelement) Pressure: 0 to 10 Bar (0 to 145 psi) Density Resolution: 0.0001 g/cm3 Precision: ± 0.0001 g/cm3* Repeatability: ± 0.0001 g/cm3 Temperature Resolution: 0,01°C Precision: ± 0,05°C Repeatability: ± 0,02°C Measuring time: < 30 sec. ** Sample volume: approx. 1.5 ml Filling: By injection Bubble detection: combined visual – electronic Operation: Touchscreen, Keyboard /Mouse /Barcodereader /Remote via PC User Interface / Display: 7" color touchscreen, 800 x 48o...

Density Meter EDM 5000 with Universal-Display (L-Controller) The technical specifications are in accordance or exceed the requirements by the European and American Pharmacopeia and various ASTM, ISO and DIN standards, GLP/GMP, 21 CFR part 11 User-friendly and customizable software. Up to 1000 methods can be programmed and further S + H devices connected. Customs Tariff Item : 9025 8040 HS / EU Country of Origin : Federal Republic of Germany Technical Data Measuring range: Density: 0 - 3 g/cm3 Temperature: 0 - 95°C (regulated Peltier thermoelement) Pressure: 0 to 10 Bar (0 to 145 psi) Density Resolution: 0.00001 g/cm3 Precision: ± 0.00005 g/cm3* Repeatability: ± 0.00001 g/cm3 Temperature: Resolution: 0.001°C Precision: ± 0.03°C Repeatability: ± 0.01°C Measuring time: < 30 sec. ** Sample volume: approx. 1.5 ml Filling: By injection Bubble detection: combined visual – electronic Operation: Touchscreen, Keyboard /Mouse /Barcodereader /Remote via PC User Interface / Display: 7"...

The traversable straddle gauges are used for offline measurement. They are placed onto the roll and moved manually, thereby measuring the form of the rolls from crown edge to crown edge. They are characterised by a high measurement point density of 1 mm and a high repetition accuracy of ± 2 µm. With the evaluation software optimised over decades together with our customers for this application, curves can be pivoted and superimposed, centered and smoothed. The scope of supply also includes a panel PC.

Cartridges with high watt density. They provide a great uniform distribution of heat, and are hermetically manufactured, which considerably increases the long life of the resistance as well as preventing the oxidation of the heating wire even at high temperatures. Over 25.000 measurements in high density cartridges available. High density Maxiwatt cartridges are manufactured from prime quality materials and undergoing the strictest safety controls, according with international standards. -Long-life -High temperatures -Maximum watts capacity 60w/cm2

The humimeter BM2 biomass moisture meter measures the water content of various kinds of biomass and is ideal for operators of biomass heating plants. The bulk density compensation ensures accurate and reliable results. The BM2 biomass moisture meter can be used for the determination of water content of wood chips, bark, wood pellets, elephant grass, wood shavings, sawdust and maize cobs. Handling / Measuring procedure Place the empty measuring device on the scale and fill the supplied 13 liter bucket with the material to measure. Constantly fill the material into the measuring chamber and select the right calibration curve. The humimeter BM2 biomass moisture meter instantly displays the water content. If required the measuring value can be saved on the device or sent to your PC via supplied USB cable. + high accuracy due to high sample volume of 13 liters + bulk density compensated + quick measuring results + wide range of calibration curves + customer calibration function

Professional moisture meter for determining the water content of biomass with optional display of bulk density and bone dry weight (tons/m³) For suppliers and operators of biomass heating plants, for measuring wood chips, barks, wooden pellets, elephant grass, wood shavings, sawdust and maize cobs Your benefits: + High measuring range up to 70% water content (dependent on the material) + Bulk density compensation by integrated scale + Display of bulk density and ATRO tons/m³ + measurement within seconds without prior treatment of sample + quick and fully automated measuring procedure + outstanding accuracy due to high sample volume + bulk density compensated + wide range of calibration curves

Grain moisture meter for maize, rye, Triticale, wheat, barley, oats, rape, soybeans, horse beans, sunflower seeds, sorghum millet and millet, mustard seeds, buckwheat, peeled and unpeeled rice, further species on request The humimeter FS1 grain moisture tester is a powerful and handy humidity measuring instrument for grain, for determining the water content of many grain types. Thanks to the Hold function the measuring value can be frozen on the display of the grain moisture tester until another button is pressed. To increase the measuring accuracy and reproducibility, different hectolitre weight classes are stored in the device. This ensures that the bulk density doesn´t affect the measuring result. The whole grain moisture tester series is calibrated and checked according to the calibratable kiln-drying method EN-ISO 712. Simultaneously, the moisture meter for grain also measures the sample temperature and includes it in the calculation of the measuring result.

VFM60MV multivariable vortex flowmeters is an integral solution for mass flow /standard flow measurement of steam and gas. Integrated pressure and temperature sensors for density compensation, so it can also measure temperature, pressure, density, mass flow and standard flow. User would only need one flowmeter to measure and read all this parameters, this advantage leads to lower cost and maintaining.

DVM HPHT ultra high accuracy all-in-one density meter and viscometer in-line, online, real-time high-pressure high-temperature viscosity & density tracking Simultaneous density, viscosity and temperature measurement Measure at reservoir conditions: 30,000 psi and 400°F (2000 bar and 200° C) Built for on the bench or in the field use Extremely accurate measurement in the harshest of conditions 5 minutes from box to operation in your flow loop – built to integrate with all PVT systems Full Titanium Grade 5 construction Widely used in oil reservoir PVT analysis HPHT Lubrication testing and formulation

-continuous control of sulfuric acid density in your lead accumulators -also for measurements in VRLA batteries (AGM) -measures the acid density in a range of 1.05 -1,4 g/cm3 -length of sensor rod 300 mm, diameter 4 mm -length from 50 mm to 700 mm Additionally we offer the display for 160€

The TSSR-Meter can be used to perform conventional isothermal relaxation measurements as well as Temperature Scanning Stress Relaxation (TSSR), an anisothermal stress relaxation measurement method (AISR method). This method can be used to characterize the mechanical-thermal properties of elastomers. An important factor here is the determination of the cross-linking density. With the ever increasing demands on materials, the determination of crosslinking density is an important advantage, and therefore the TSSR meter is particularly suitable for material development and quality control during production.